diff --git a/Marlin/Makefile b/Marlin/Makefile index c72c1d589607..ca7cacaa6acb 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -307,20 +307,22 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1154) else ifeq ($(HARDWARE_MOTHERBOARD),1155) # Tenlog D3 Hero IDEX printer else ifeq ($(HARDWARE_MOTHERBOARD),1156) -# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed) +# Tenlog D3,5,6 Pro IDEX printers else ifeq ($(HARDWARE_MOTHERBOARD),1157) -# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed) +# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed) else ifeq ($(HARDWARE_MOTHERBOARD),1158) -# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed) +# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed) else ifeq ($(HARDWARE_MOTHERBOARD),1159) -# Longer LK1 PRO / Alfawise U20 Pro (PRO version) +# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed) else ifeq ($(HARDWARE_MOTHERBOARD),1160) -# Longer LKx PRO / Alfawise Uxx Pro (PRO version) +# Longer LK1 PRO / Alfawise U20 Pro (PRO version) else ifeq ($(HARDWARE_MOTHERBOARD),1161) -# Zonestar zrib V5.3 (Chinese RAMPS replica) +# Longer LKx PRO / Alfawise Uxx Pro (PRO version) else ifeq ($(HARDWARE_MOTHERBOARD),1162) -# Pxmalion Core I3 +# Zonestar zrib V5.3 (Chinese RAMPS replica) else ifeq ($(HARDWARE_MOTHERBOARD),1163) +# Pxmalion Core I3 +else ifeq ($(HARDWARE_MOTHERBOARD),1164) # # RAMBo and derivatives diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index c993b9df0e3c..b5f5b037f9ee 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -110,13 +110,14 @@ #define BOARD_COPYMASTER_3D 1154 // Copymaster 3D #define BOARD_ORTUR_4 1155 // Ortur 4 #define BOARD_TENLOG_D3_HERO 1156 // Tenlog D3 Hero IDEX printer -#define BOARD_RAMPS_S_12_EEFB 1157 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed) -#define BOARD_RAMPS_S_12_EEEB 1158 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed) -#define BOARD_RAMPS_S_12_EFFB 1159 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed) -#define BOARD_LONGER3D_LK1_PRO 1160 // Longer LK1 PRO / Alfawise U20 Pro (PRO version) -#define BOARD_LONGER3D_LKx_PRO 1161 // Longer LKx PRO / Alfawise Uxx Pro (PRO version) -#define BOARD_ZRIB_V53 1162 // Zonestar zrib V5.3 (Chinese RAMPS replica) -#define BOARD_PXMALION_CORE_I3 1163 // Pxmalion Core I3 +#define BOARD_TENLOG_MB1_V23 1157 // Tenlog D3, D5, D6 IDEX Printer +#define BOARD_RAMPS_S_12_EEFB 1158 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed) +#define BOARD_RAMPS_S_12_EEEB 1159 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed) +#define BOARD_RAMPS_S_12_EFFB 1160 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed) +#define BOARD_LONGER3D_LK1_PRO 1161 // Longer LK1 PRO / Alfawise U20 Pro (PRO version) +#define BOARD_LONGER3D_LKx_PRO 1162 // Longer LKx PRO / Alfawise Uxx Pro (PRO version) +#define BOARD_ZRIB_V53 1163 // Zonestar zrib V5.3 (Chinese RAMPS replica) +#define BOARD_PXMALION_CORE_I3 1164 // Pxmalion Core I3 // // RAMBo and derivatives diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 046957e1ba90..909ae992a991 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -195,6 +195,8 @@ #include "ramps/pins_ORTUR_4.h" // ATmega2560 env:mega2560 #elif MB(TENLOG_D3_HERO) #include "ramps/pins_TENLOG_D3_HERO.h" // ATmega2560 env:mega2560 +#elif MB(TENLOG_MB1_V23) + #include "ramps/pins_TENLOG_MB1_V23.h" // ATmega2560 env:mega2560 #elif MB(MKS_GEN_L_V21) #include "ramps/pins_MKS_GEN_L_V21.h" // ATmega2560 env:mega2560 #elif MB(RAMPS_S_12_EEFB, RAMPS_S_12_EEEB, RAMPS_S_12_EFFB) diff --git a/Marlin/src/pins/ramps/pins_TENLOG_MB1_V23.h b/Marlin/src/pins/ramps/pins_TENLOG_MB1_V23.h new file mode 100644 index 000000000000..b3f7d5f216b5 --- /dev/null +++ b/Marlin/src/pins/ramps/pins_TENLOG_MB1_V23.h @@ -0,0 +1,155 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Tenlog pin assignments + */ + +#define REQUIRE_MEGA2560 +#include "env_validate.h" + +#if HOTENDS > 2 || E_STEPPERS > 2 + #error "Tenlog supports up to 2 hotends / E steppers." +#endif + +#define BOARD_INFO_NAME "Tenlog MB1 V2.3" +#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME + +// +// Limit Switches +// +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 14 +//#define Y_MAX_PIN 15 // Connected to "DJ" plug on extruder heads +#define Z_MIN_PIN 18 +#if ENABLED(BLTOUCH) + #define SERVO0_PIN 19 +#else + #define Z_MAX_PIN 19 +#endif + +// +// Steppers +// +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 + +#define X2_STEP_PIN 36 +#define X2_DIR_PIN 34 +#define X2_ENABLE_PIN 30 + +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 + +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 + +#define Z2_STEP_PIN 65 +#define Z2_DIR_PIN 66 +#define Z2_ENABLE_PIN 64 + +#define E0_STEP_PIN 57 +#define E0_DIR_PIN 58 +#define E0_ENABLE_PIN 59 + +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 24 + +// +// Temperature Sensors +// +#define TEMP_0_PIN 15 // Analog Input +#define TEMP_1_PIN 13 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 11 +#define HEATER_1_PIN 10 +#define HEATER_BED_PIN 8 + +#define FAN_PIN 9 +#define FAN2_PIN 5 // Normally this would be a servo pin + +//#define NUM_RUNOUT_SENSORS 0 +#define FIL_RUNOUT_PIN 15 +//#define FIL_RUNOUT2_PIN 21 + +// +// PSU and Powerloss Recovery +// +#if ENABLED(PSU_CONTROL) + #define PS_ON_PIN 40 // The M80/M81 PSU pin for boards v2.1-2.3 +#endif + +// +// Misc. Functions +// +//#define CASE_LIGHT_PIN 5 +//#ifndef LED_PIN +// #define LED_PIN 13 +//#endif + +#if HAS_CUTTER + //#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM + //#define SPINDLE_LASER_ENA_PIN 4 // Pullup! +#endif + +// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector +//#define FILWIDTH_PIN 5 // Analog Input + +#define SDSS 53 +#define SD_DETECT_PIN 49 + +// +// LCD / Controller +// + +//#if IS_RRD_SC + +//#ifndef BEEPER_PIN +// #define BEEPER_PIN -1 +//#endif + +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 +#define LCD_PINS_D4 -1 +#define LCD_PINS_D5 -1 +#define LCD_PINS_D6 -1 +#define LCD_PINS_D7 -1 + +//#define BTN_EN1 31 +//#define BTN_EN2 33 +//#define BTN_ENC 35 + +//#ifndef KILL_PIN +// #define KILL_PIN 41 +//#endif + +//#endif // IS_RRD_SC