Simple AF

I AM NOT RESPONSIBLE FOR DAMAGE TO YOUR PRINTER - INSTALLING CUSTOM FIRMWARE IS A RISK

The Simple AF project is for anyone who wants to use a different probe with their K1, K1C or K1 Max and use vanilla klipper and no Creality Gcode.

This project supports the following probes:

• Cartographer
• Beacon COMING SOON
• BTT Eddy
• Microprobe
• BLTouch, 3dTouch, CrTouch

Installation

There is a separate guide for each probe

• If you have a Cartographer follow the Cartographer guide

• If you have a Beacon follow the Beacon guide COMING SOON

• If you have a BTT Eddy, follow the BTT Eddy guide

• If you have a Microprobe, follow the Microprobe guide

• If you have a BLTouch, 3dTouch or CrTouch follow the Bltouch guide

The Details

The installation script will perform the following steps:

• Disable creality services
• Install Emergency Factory Reset feature
• Install Bash
• Replace Creality cam_app and old mjpg_streamer with entware mjpg_streamer
• Install Moonraker
• Install Moonraker Timelapse - no longer enabled by default
• Install Nginx
• Install Fluidd and Fluidd Config
• Install Mainsail
• Install KAMP
• Install Vanilla Klipper
• Install Guppyscreen
• Setup the probe of course