CHANGELOG.md

Change log for PC Engines binary releases

This document contain changelog for binary releases that contain all below components:

• coreboot (with all required blobs)
• SeaBIOS
• sortbootorder
• ipxe
• memtest86+

To see recent changes for legacy and mainline branch:

• Releases 4.0.x are based on PC Engines 20160304 release.
• Releases 4.6.x are based on mainline support merged in this gerrit ref.

Unreleased 4.6.x

v4.6.8 - 2018-04-06

• coreboot v4.6.8
• SeaBIOS rel-1.11.0.4
• sortbootorder v4.6.8
• ipxe
• memtest86+ v5.0.1

v4.6.7 - 2018-02-27

• coreboot v4.6.7
• SeaBIOS rel-1.11.0.3
• sortbootorder v4.6.5
• ipxe
• memtest86+ v5.0.1

v4.6.6 - 2018-01-31

• coreboot v4.6.6
• SeaBIOS rel-1.11.0.3
• sortbootorder v4.6.5
• ipxe
• memtest86+ v5.0.1

v4.6.5 - 2017-12-29

• coreboot v4.6.5
• SeaBIOS rel-1.11.0.2
• sortbootorder v4.6.5
• ipxe
• memtest86+ v5.0.1

v4.6.4 - 2017-11-30

• coreboot v4.6.4
• SeaBIOS rel-1.11.0.1
• sortbootorder v4.6.4
• ipxe
• memtest86+ v5.0.1

v4.6.3 - 2017-10-30

• coreboot v4.6.3
• SeaBIOS rel-1.10.2.1
• sortbootorder v4.6.3
• ipxe
• memtest86+ v4.0.1

v4.6.2 - 2017-09-29

• coreboot v4.6.2
• SeaBIOS rel-1.10.2.1
• sortbootorder v4.5.7
• ipxe
• memtest86+ v4.0.1

v4.6.1 - 2017-08-31

• coreboot v4.6.1
• SeaBIOS rel-1.10.2.1
• sortbootorder v4.5.7
• ipxe
• memtest86+ v4.0.1

v4.6.0 - 2017-07-21

• coreboot v4.6.0
• SeaBIOS rel-1.10.2.1
• sortbootorder v4.5.7
• ipxe
• memtest86+ v4.0.1

v4.5.8 - 2017-06-30

• coreboot v4.5.8
• SeaBIOS rel-1.10.2.1
• sortbootorder v4.5.6
• ipxe
• memtest86+ v4.0.1

v4.5.7 - 2017-06-08

• coreboot v4.5.7
• SeaBIOS rel-1.10.0.1
• sortbootorder v4.5.5
• ipxe
• memtest86+ v4.0.1

v4.5.6 - 2017-05-31

• coreboot v4.5.6
• SeaBIOS rel-1.10.0.1
• sortbootorder v4.5.5
• ipxe
• memtest86+ v4.0.1

v4.5.5.2 - 2017-03-03

• coreboot v4.5.5.2
• SeaBIOS rel-1.10.0.1
• sortbootorder v4.5.4
• ipxe
• memtest86+ v4.0.1

Changed

• (APU3 only) set GPIO33 as output/low by default

v4.5.5.1 - 2017-03-02

• coreboot v4.5.5.1
• SeaBIOS rel-1.10.0.1
• sortbootorder v4.5.4
• ipxe
• memtest86+ v4.0.1

Changed

• (APU3 only) set GPIO33 as output/high by default

v4.5.5 - 2017-02-24

• coreboot v4.5.5
• SeaBIOS rel-1.10.0.1
• sortbootorder v4.5.4
• ipxe
• memtest86+ v4.0.1

Added

• sgabios video oprom is added by default (v.1.0.0 pcengines version)
• added setup option to turn on legacy console to serial redirect using sgabios

Changed

• SeaBIOS up to 1.10.0.1
• sortbootorder up to 4.5.4
• coreboot rebased to the latest mainline
• removed setup option to disable serial console, as it was not working in mainline

Fixed

• Asmedia ASM106x controllers work in the mPCIe1 slot
• Memory size shown during boot corrected in 2GB SKU devices

Known issues

• Asmedia ASM106x controllers are not working in the mPCIe2 slot
• Some XHCI USB booting stability issues after soft-reset

v4.5.4 - 2017-01-24

• coreboot v4.5.4
• SeaBIOS rel-1.9.2.4
• sortbootorder v4.5.3
• ipxe
• memtest86+ v4.0.1

v4.5.3

coreboot

Added

• support for legacy LEDs behavior
• legacy logs at boot
• 4k alignment for bootorder in CBFS

Changed

• enabled memtest86+ by default

Fixed

• incorrect GPIO implementation

sortbootorder

Fixed

• problem with saving configuration

SeaBIOS

Changed

• limit level 1 logs to minimum

v4.5.2

coreboot

Added

• port of clock settings from legacy implementation
• support for getting sku and serial number
• sortbootorder as secondary payload
• PXE ROM based on 2016.7 release

Changed

• log level to ALERT
• enable UART C and UART D by default

Fixed

OSes tested: Debian testing (Linux kernel 4.8) and Voyage Linux (APU2 image builder)

• booting from start works fine (Seagete SSHD 1TB ST1000LM014)
• USB booting works fine (USB MSC Drive UFD 3.0 Silicon-Power16G 1100)
• iPXE works fine (tested with Debian netboot pxelinux.0)
• HDD warm and cold boot works (Seagete SSHD 1TB ST1000LM014)
• USB warm and cold boot works (USB MSC Drive UFD 3.0 Silicon-Power16G 1100)
• iPXE works fine (tested with Debian netboot pxelinux.0)

sortbootorder

Fixed

• compilation fixes to build with mainline coreboot

v4.5.1

Added

• mainline support for APU2