Skip to content

Latest commit

 

History

History
165 lines (136 loc) · 6.21 KB

README.md

File metadata and controls

165 lines (136 loc) · 6.21 KB
Raw

Network-Editor: PInterceptor

This product is for educational purposes only! You are not allowed to use it for anything illegal or something, you don't have permissions for.

This tool will allow you to modify network traffic as a Man-in-the-middle. You can define a filter, which matches packets against your conditions and will trigger actions. Those will modify the packets.

It is pretty simple to use - as long you can write some simple python-code. If not, just head over to the example workspace under /workspace/demoWorkspace, there is a simple example.

Installation

To install the software, use the provided .deb-file under the release-section of this repo. If you want to build it yourself from source, you can do the following:

git clone https://github.com/paul1278/network-editor
cd network-editor/build
./build.sh

sudo dpkg -i network-editor.deb

sudo pintercepter

This will produce the .deb-file. Otherwise you can simply use the project as-is with python3. For that, run start.py.

Project setup

You need to create a workspace which contains all needed files. Simply copy the demoWorkspace from this repo, this is the structure you need.

Edit the workspace.yaml-file as needed:

protocols:
  - my_protocol_filename

filter:
  - loaded_filter_name1

# The interface's which are the bridge
interface1: eth0
interface2: eth1

# The interface MAC-adresses of the devices
mac1: 02:42:ac:12:00:02
mac2: 02:42:ac:13:00:02

# The local MAC-adresses
localmac1: 02:42:ac:12:00:05
localmac2: 02:42:ac:13:00:05

# When true, you are a full IPv4-device - respond to ARP etc.
# Set to false, when you want to be totally transparent (also deactivate IP-stack on your device) - in this case you don't need the mac-addresses above.
rewriteMAC: true

Running the tool

After installing the package, you can use it under pinterceptor. Otherwise, run start.py using python3.

The command-line is pretty simple:

root@interceptor:/main# python3 start.py -h
 (   (                                                 
 )\ ))\ )         )                          )         
(()/(()/(      ( /(  (  (         (       ( /(    (    
 /(_))(_))(    )\())))\ )(   (   ))\`  )  )\())(  )(   
(_))(_))  )\ )(_))//((_|()\  )\ /((_)(/( (_))/ )\(()\  
| _ \_ _|_(_/(| |_(_))  ((_)((_|_))((_)_\| |_ ((_)((_) 
|  _/| || ' \))  _/ -_)| '_/ _|/ -_) '_ \)  _/ _ \ '_| 
|_| |___|_||_| \__\___||_| \__|\___| .__/ \__\___/_|   
                                   |_|                 
[+] Starting up
usage: start.py [-h] [-w WORKSPACE] [-i] [-v]

options:
  -h, --help            show this help message and exit
  -w WORKSPACE, --workspace WORKSPACE
                        Give a path to a ready workspace
  -i, --interactive     Start with a UI
  -v, --verbose         Enable debug mode without config

If you want to see debug output on incoming / outgoing packets, we suggest turning on verbose-mode.

Writing modules

Protocols

Protocols are written for scapy and must match the syntax accordingly. Just head to the scapy-docs for that. Using the function bind_layers you can add your protocol to the layers.

from scapy.all import Packet, XByteField, bind_layers, TCP

class CoffeeProtocolPriceList(Packet):
    name = "CoffeeProtocolPriceList"
    fields_desc=[XByteField("actionType", 0)]

bind_layers(TCP, CoffeeProtocolPriceList, sport=44445)

To activate a protocol, simply use the module-name on the workspace.yaml.

Filters

A filter should match a packet to perform actions on it. It consists of a function called check and a list<String> called actions:

from scapy.all import TCP,Raw
from workspace import protocols

def check(pkt, direction):
  return pkt.haslayer(protocols.demo.CoffeeProtocolPriceList)

actions = ["demoPayload"]

Each packet will be checked by your check-function, which should return True or False. If you return True, the program will launch each action from the actions-list. The actions are actually the file-names and the filters must be activated using the module-filename inside the workspace.yaml.

Actions

An action receives a packet using the modPaket(pkt)-function. Make your changes there and return the packet again. Make sure to recalculate checksums when needed:

from scapy.all import TCP,Ether,IP
from workspace import protocols
CoffeeProtocolPriceList = protocols.demo.CoffeeProtocolPriceList

def modPaket(pkt):
  pkt[TCP].payload[CoffeeProtocolPriceList].products[0].productName = "KAFFEEZZ"
  pkt[TCP].payload[CoffeeProtocolPriceList].products[0].price = 1
  
  pkt[TCP].chksum = None
  pkt[TCP].len = None
  pkt[IP].len = None
  pkt[IP].chksum = None
  return Ether(bytes(pkt))

You can also include your custom protocols using workspace.protocols.

Running the demo

The demo consists of three parts:

  • COFFEE_SERVER: A server which will return a price-list for a COFFEE_MACHINE
  • COFFEE_MACHINE: An industrial coffee-machine which needs the price list for your customers.
  • MALLORY: The MITM in between.

The demo-protocol

The demo uses a custom protocol.

The machine will send a request to the server, which contains an action-byte:

+-------------------------------------------+
... Ethernet / IP / TCP ... | 1 Byte Action |
+-------------------------------------------+

This is 01h for "getPrices". The response is as simple as:

+--------------------------------------------+
|... Ethernet / IP / TCP ... | 1 Byte Action |
| 8 Byte product-name | 1 Byte price | etc.  |
+--------------------------------------------+

For this protocol there is a whole wrapper, a filter which recognizes the answer and an action, which changes prices and product-names. Just play around with that!

You can start it using sudo docker-compose -f docker-compose.demo.yml up -d. Connect to mallory using sudo docker-compose -f docker-compose.demo.yml exec mallory bash. After that, run the application using python start.py -w /opt/workspace/demoWorkspace -d. You can see the changes when running the machine:

sudo docker-compose -f docker-compose.demo.yml exec coffee_machine bash
python3 coffee_client.py