SmartLabs SML-5442TW

[WallcroftUK]

is it possible to install it on this devices to emmc ?

[ophub]

Send screenshots of the results of these three commands. There is currently no installation option for your device, you can add installation options according to your test situation.

cat /boot/uEnv.txt
cat /etc/flippy-openwrt-release
ls -l /boot/u-boot*

[WallcroftUK]

here

[WallcroftUK]

i have SML-5442TW openwrt installed on sdcard i must edit uENV.txt to set my dtd

[WallcroftUK]

meson-gxl-s905d-sml5442tw.dtb

[WallcroftUK]

and if i can ask you guys about one thing
if its possible to install k8s on device :D

[WallcroftUK]

the thing is only this version of armbian work for me i tried latest armbian older armbian and nothing and after try of this img it actually booted :D and works

[WallcroftUK]

and other thing wlan is not found no wifi even when this device have BT and Wifi

EDIT:

RTL8822CE

is on chip with BT and wifi

[ophub]

search: s905d-sml5442tw

Download the Armbian and OpenWrt systems separately, including the versions 5.15.y and 6.1.y, and perform tests on both.

Make sure that the dtb name in /boot/uEnv.txt is correct. Your main focus should be testing which u-boot is suitable for use in the 6.1.y version. If the default one fails to boot from USB, you can rename /boot/ u-boot-p201.bin, u-boot-p201.bin, and u-boot-n1.bin to u-boot.ext respectively for testing. Start by testing if USB booting works properly.

https://github.com/ophub/amlogic-s9xxx-armbian/releases/tag/Armbian_jammy_save_2023.06

https://github.com/ophub/amlogic-s9xxx-openwrt/releases/tag/OpenWrt_official_save_2023.06

[WallcroftUK]

I booted from sdcard and only working is your image of openwrt but if I wanted same way boot armbian it stuck at something

[ophub]

I just added the configuration of your device and built the firmware of this device, please download and test it.

search: s905d-sml5442tw

[WallcroftUK]

Where should I search ? Sorry for that question

[WallcroftUK]

found it :D

[WallcroftUK]

it works 👍 but can it be installed on emmc ? @ophub

[ophub]

Post the screenshot of the newly downloaded 6.1.36 interface after startup.

cat /etc/ophub-release
ls -l /boot/u-boot*

Installation method: armbian-install, select 104

[07510480632]

cat /boot/uEnv.txt
cat /etc/flippy-openwrt-release
ls -l /boot/u-boot*

[pospa1]

Hi, can someone help me with boot Armbian on SML-5442TW? Im not able to boot it from sd card... always boot into stock firmware.