我家云可以引导启动了

[liubin7913]

最新的Armbian_23.08.0_rockchip_l1pro_bookworm_6.1.50_server_2023.09.02.img或Armbian_23.08.0_rockchip_l1pro_bullseye_6.1.50_server_2023.09.02.img，刷u盘还是写emmc，还是不能引导

[ophub]

https://github.com/ophub/amlogic-s9xxx-armbian/releases/download/Armbian_jammy_save_2023.09/Armbian_23.08.0_rockchip_l1pro_jammy_6.1.51_server_2023.09.05.img.gz

你下载我刚刚弄的这个试试

[liubin7913]

刚刚测试依旧无法引导启动

[aaa7260]

同样的问题，屏幕不显示，换loader也不行

[ophub]

路由器里能找到启动的IP吗？ssh能访问吗？

[aaa7260]

路由器可以看到ip，ssh连接不上，wind网盘：
https://cloud.189.cn/web/share?code=vA736bn2EfEb
密码3997

[ophub]

Armbian_22.05.0-trunk_Chainedbox-wind_buster_current_5.15.32
你是说这个文件可以正常使用？网络和HDMI都正常？

[aaa7260]

是的，大佬

[ophub]

好的，10分钟后给你出一个试试，使用这个固件的u-boot和dtb

[aaa7260]

谢谢大佬，我觉得你的dtb好些

[ophub]

https://github.com/ophub/amlogic-s9xxx-armbian/releases/download/Armbian_bullseye_save_2023.09/Armbian_23.08.0_rockchip_chainedbox_bullseye_5.15.131_server_2023.09.08.img.gz

你下载这个测试下，看看能不能正常使用，这个的dtb和u-boot都是复制的你发的固件的。
如果可以，你再试试改dtb为之前的，修改 /boot/armbianEnv.txt 文件，修改里面dtb的文件名为：rk3328-l1pro-1296mhz.dtb。保存重启看看能不能用。

反馈下默认固件的情况和修改后的情况。

[aaa7260]

感谢大佬，你太敬业了，这个版本可以上了

[ophub]

你替换了dtb试了没？默认这个是没法维护的dtb，原来固件里的，你修改 /boot/armbianEnv.txt 文件，修改里面dtb的文件名为：rk3328-l1pro-1296mhz.dtb。保存重启看看能不能用。如果这个能用就是完美方案，这个dtb有f大不断维护。

把ssh进去的界面接个图，把这个命令(cat /etc/ophub-release)看到的结果也截个图，很久没看到这个设备能上线了

[aaa7260]

[ophub]

https://www.right.com.cn/forum/thread-1301727-1-1.html

我网上搜下了，上面固件使用的wind可能是这个帖子的作者（如果错了请随时更正）。我把他也添加到贡献者名单里了，感谢这些大佬们的分享。

记得反馈下修改dtb名字后的测试结果。

[s2031215]

感謝大佬，吃灰了很久的我家云終於可以用了
原本rk3328-chainedbox.dtb風扇是不會轉和燈是保持紅色
修改rk3328-l1pro-1296mhz.dtb之後風扇會自己轉和燈會轉紫色

[ophub]

好的，多谢反馈，我改一下dtb

[liubin7913]

刷最新Armbian_23.08.0_rockchip_chainedbox_bullseye_6.1.52_server_2023.09.12.img，前面板电源按钮能关机，不能开机，需要拔电源重插

[ophub]

[laoskido]

Thanks to the boss, my cloud that has been in the dust for a long time can finally be used. Originally, the fan of rk3328-chainedbox.dtb would not turn and the light would remain red. After modifying rk3328-l1pro-1296mhz.dtb, the fan will turn on its own and the light will turn purple.

What is the Write speed of your device ? mine, when start copying from PC to NAS, from 56MB/s and then it fluctuates down to 36-4X MB/s . Both LAN and Router are 1G ethernet speed.

I bought the USB to Sata cable ( JSM578) , plugged into the back Usb 3.0 port, speed still the same. around 40-50MB/s

I have 2 L1 to test. One of them messed up preety bad when i tried to mod the usb sata.
The other L1 is still in its original shape.

[laoskido]

Okay, thanks for the feedback, I will change the dtb

Thanks for the great work , boss.

I have a question, when i use the rk3328_v1.14.249.bin , the L1 wont boot.

If i use the old rk3328_loader.bin , it boots and works fine with your imgage.

Rockchip tooltox i use the newest version, same as yours.

[ophub]

Use what you can launch

[elo3333]

It is an excellent piece of work. Just a minor query. I cannot use PGIO79 and PWM to control the fan speed. Any method to fix the device or resource busy issue with the command: echo 79 > /sys/class/gpio/export?

Or is there any means to control the speed of the fan?

[mygule]

大佬您有相关学习群吗