THIS IS THE OLD PORT: Please move over to https://github.com/openzfsonwindows/openzfs
Download free development Windows 10 image from Microsoft.
https://developer.microsoft.com/en-us/windows/downloads/virtual-machines
and create two VMs.
- Host (running Visual Studio and Kernel Debugger)
- Target (runs the compiled kernel module)
The VM images comes with Visual Studio 2017, which we use to compile the driver.
It is recommended that the VMs are placed on static IP, as they can change IP with all the crashes, and you have to configure the remote kernel development again.
Go download the Windows Driver Kit 10
https://developer.microsoft.com/en-us/windows/hardware/windows-driver-kit
and install on both VMs. You will need both the SDK and WDK: Download the SDK with the Visual Studio 2017 community edition first and install it. It will update the already installed Visual Studio. Then install the WDK. At the end of the installer, allow it to install the Visual Studio extension.
On Target VM, complete the guide specified here, under section "Prepare the target computer for provisioning".
Which mostly entails running:
C:\Program Files (x86)\Windows Kits\10\Remote\x64\WDK Test Target Setup x64-x64_en-us.msi
- reboot Target VM
On the Host VM, continue the guide to configure Visual Studio 2017.
- Load Visual Studio 2017, there is no need to load the project yet.
- Menu > Driver > Test > Configure Devices
- Click "Add New Device"
- In "Display name:" enter "Target"
- In "Device type:" leave as "Computer"
- In "Network host name:" enter IP of Target VM, for me "172.16.248.103"
- Provisioning options: o Provision device and choose debugger settings.
- Click "Next >"
It now confirms that it talked to the Target, and note here that "Host IP" it that of the Host VM, for me, "172.16.248.102", and not to be confused by the Target IP entered on previous screen.
- Click "Next >"
Watch and wait as remote items are installed on the Target VM. It will most likely reboot the Target VM as well.
I've had dialog boxes pop up and I agree to installation, but I am not sure they are supposed to. They probably shouldn't, it would seem it failed to put WDKRemoteUser in Administrators group. If that happens, use "lusrmgr.msc" to correct it.
The task "Creating system restore point" will most likely fail and that is acceptable, however, if other tasks fail, you may need to retry until they work.
At the end of the run, the output window offers a link to the full log, which is worth reading if you encounter issues.
When things fail, I start a CMD prompt as Administrator, and paste in the commands that fail, from the log file. It would be nice if this process just worked though.
If your version of .NET newer, just move along.
The Target VM should reboot, and login as "WDKRemoteUser".
It is recommended you get GIT bash for Windows and install:
Handling configuration errors with Visual Studio 2019 & WDK 10:
There are some issues with Visual Studio 2019 which can cause the following problem in setting up kernel debugging. ERROR: Task “Configuring kernel debugger settings (possible reboot)” failed to complete successfully. Look at the logs in the driver test group explorer for more details on the failure.
This problem is related to MSVC debug tool location mismatch, and as a workaround use the following steps to mitigate this problem:
As Administrator, run Developer Command Prompt for VS 2019 in your Host VM Run the following commands in the VS Developer Command Prompt:
cd /d %VCToolsRedistDir%\debug_nonredist MKLINK /J x86\Microsoft.VC141.DebugCRT x86\Microsoft.VC142.DebugCRT MKLINK /J x64\Microsoft.VC141.DebugCRT x64\Microsoft.VC142.DebugCRT
Retry configuration by following guide to configure Visual Studio 2017 mentioned above.
Host and Target VMs are now configured.
First time you load the project it might default to
Debug : ARM
you probably want to change ARM ==> X64.
-
Load ZFSin solution
-
Menu > Debug > ZFSin Properties
-
Configuration Properties > Debugging "Debugging tools for Windows - Kernel Debugger" Remote Computer Name: Target
-
Configuration Properties > Driver Install > Deployment Target Device Name: Target [Tick] Remove previous driver versions O Hardware ID Driver Update Root\ZFSin
You can run DbgView on the Target VM to see the kernel prints on that VM.
Run the compiled Target
- Compile solution
- Menu > Debug > Start Debugging (F5)
wait a while, for VS2017 to deploy the .sys file on Target and start it.
Target VM optionals.
If you find it frustrating to do development work when Windows Defender or Windows Updates run, you can disable those in gpedit.msc
- Computer Configuration > Administrative Templates > Windows Components > Windows Defender Windows Updates
✅ Compile SPL sources
- Godzillion warnings yet to be addressed
✅ Port SPL sources, atomics, mutex, kmem, condvars
- C11 _Atomics in kmem not yet handled
✅ Compile ZFS sources, stubbing out code as needed
✅ Include kernel zlib library
✅ Load and Unload SPL and ZFS code
✅ Port kernel zfs_ioctl.c to accept ioctls from userland
✅ Compile userland libspl, libzpool, libzfs, ...
✅ Include pthread wrapper library
- Replaced with thin pthread.h file
✅ Include userland zlib library
✅ Compile cmd/zpool
✅ Port functions in libzpool, libzfs. Iterate disks, ioctl
✅ Test ioctl from zpool to talk to kernel
✅ Port kernel vdev_disk.c / vdev_file.c to issue IO
✅ Port over cmd/zfs
✅ Add ioctl calls to MOUNT and create Volume to attach
✅ Add ioctl calls to UNMOUNT and detach and delete Volume
✅ Port kernel zfs_vnops.c / zfs_vnops_windows.c
- Many special cases missing, flags to create/read/etc
✅ Correct file information (dates, size, etc)
✅ Basic DOS usage
✅ Simple Notepad text edit, executables also work.
✅ Basic drag'n'drop in Explorer
✅ zfs send / recv, file and pipe.
✅ ZVOL support
✅ git clone ZFS repo on ZFS mounted fs
✅ Compile ZFS on top of ZFS
❎ Scrooge McDuck style swim in cash
- Windows does not handle EFI labels, for now they are parsed with libefi, and we send offset and size with the filename, that both libzfs and kernel will parse out and use. This works for a proof of concept.
Possibly a more proper solution would be to write a thin virtual hard disk driver, which reads the EFI label and present just the partitions.
-
vdev_disk.c spawns a thread to get around that IoCompletionRoutine is called in a different context, to sleep until signalled. Is there a better way to do async in Windows?
-
ThreadId should be checked, using PsGetCurrentThreadId() but it makes zio_taskq_member(taskq_member()) crash. Investigate.
-
Functions in posix.c need sustenance.
-
The Volume created for MOUNT has something wrong with it, we are unable to query it for mountpoint, currently has to string compare a list of all mounts. Possibly also related is that we can not call any of the functions to set mountpoint to change it. This needs to be researched.
-
Find a way to get system RAM in SPL, so we can size up the kmem as expected. Currently looks up the information in the Registry. kmem should also use Windows signals "\KernelObjects\LowMemoryCondition" to sense pressure.
Thinking on mount structure. Second design:
Add dataset property WinDriveLetter, which is ignored on Unix system. So for a simple drive letter dataset:
zfs set driveletter=Z pool
The default creating of a new pool, AND, importing a UNIX pool, would set the root dataset to
driveletter=?:
So it is assigned first-available drive letter. All lower datasets will be mounted inside the drive letter. If pool's WinDriveLetter is not set, it will mount "/pool" as "C:/pool".
Latest binary files are available at GitHub releases
If you are running windows 10 with secure boot on and/or installing an older release you will need to enable unsigned drivers from an elevated CMD:
bcdedit.exe -set testsigning on- Then reboot. After restart it should have Test Mode bottom right corner of the screen.
After that either
- Run OpenZFSOnWindows.exe installer to install
- Would you like to install device software? should pop up, click install
- If installing an unsigned release, click "Install anyway" in the "unknown developer" popup
Or if you do not want to run the Installer, run this command by hand from elevated CMD:
zfsinstaller.exe install .\ZFSin.inf- Would you like to install device software? should pop up, click install
- If installing an unsigned release, click "Install anyway" in the "unknown developer" popup
Run zpool.exe status to confirm it can talk to the kernel
Failure would be:
Unable to open \\.\ZFS: No error.
Success would be:
No pools available
The basic syntax to creating a pool is as below. We use the pool name "tank" here as with Open ZFS documentation. Feel free to pick your own pool name.
# zpool create [options] tank disk
- Create single disk pool
# zpool create [options] tank mirror disk1 disk2
- Create mirrored pool ("raid1")
# zpool create [options] tank raidz disk1 disk2 disk3 .... diskn
- Create raidz ("raid5") pool of multiple disks
The default options will "mostly" work in Windows, but for best compatibility should use a case insensitive filesystem.
The recommended options string for Windows is currently:
zpool create -O casesensitivity=insensitive -O compression=lz4 \
-O atime=off -o ashift=12 tank disk
- Creating filebased pools would look like:
# fsutil file createnew C:\poolfile.bin 200000000
# zpool.exe create tank \\?\C:\poolfile.bin
Note that "\\?\C:\" needs to be escaped in bash shell, ie
"\\\\?\\C:\\".
TEST ONLINE 0 0 0
\??\C:\poolfile.bin ONLINE 0 0 0
- Creating a HDD pool
First, locate disk name
# wmic diskdrive list brief
VMware, VMware Virtual S SCSI Disk Device \\.\PHYSICALDRIVE2 VMware, VMware Virtual S SCSI Disk Device 0 5362882560
# zpool create tank PHYSICALDRIVE2
Creating a virtual hard disk (ZVOL) is done by passing "-V " to the "zfs create" command.
# zfs create -V 2g tank/hello
Which would create a disk of 2GB in size, called "tank/hello". Confirm it was created with:
# wmic diskdrive list brief
Caption DeviceID Model Partitions Size
ZVOL tank/hello SCSI Disk Device \\.\PHYSICALDRIVE2 ZVOL tank/hello SCSI DiskDevice 0 2105671680
If you have finished with ZFS, or want to eject the USB or HDD that the pool resides on, it must first be exported. Similar to "ejecting" a USB device before unplugging it.
# zpool export tank
If a zpool has been created on a disk partition from a different system make
sure the partition label contains "zfs". Otherwise zpool import won't
recognize the pool and will fail with "no pools available to import".
# zpool import tank
If you used the Installer, you can browse to "C:\Program Files (x86)\OpenZFS On Windows" and run the "uninst000.exe" Uninstaller program.
You can also use "Add Remove Programs" from the Settings menu, and click on "OpenZFS On Windows-debug version x.xx" and select Uninstall.
If you did not use the Installer, you can manually uninstall it:
zfsinstaller uninstall .\ZFSin.inf
To verify that the driver got uninstalled properly you can check "zpool.exe status".
When uninstalled with success, "zpool.exe status" should return:
Unable to open \\.\ZFS: No error.
If the driver is still there, it would be:
No pools available
A reboot might be necessary to uninstall it completely.
You can use the registry to tune various parameters.
Also, there is kstat to dynamically change parameters.
There are nightly builds available at AppVeyor
- These builds are currently not signed and therefore require test mode to be enabled.
There also are test builds available here. These are "hotfix" builds for allowing people to test specific fixes before they are ready for a release.