build.yml

# Copyright 2020 The OpenEBS Authors. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
name: build

on:
  create:
  push:
    branches:
      - 'develop'
      - 'v*'
    paths-ignore:
      - 'deploy/helm/**'
      - 'docs/**'
      - 'MAINTAINERS'
      - '*.md'
      - 'LICENSE'

jobs:
  lint:
    # to ignore builds on release
    if: ${{ (github.event.ref_type != 'tag') }}
    runs-on: ubuntu-latest
    steps:
      - name: Checkout
        uses: actions/checkout@v4

      - name: License Check
        run: make license-check

  unit-test:
    # to ignore builds on release
    if: ${{ (github.event.ref_type != 'tag') }}
    runs-on: ubuntu-latest
    steps:
      - name: Checkout
        uses: actions/checkout@v4

      - name: Unit test
        run: make test

      - name: Verify corrections
        run: make verify-src

      - name: Upload Coverage Report
        uses: codecov/codecov-action@v1
  
  sanity-test:
    # to ignore builds on release
    if: ${{ (github.event.ref_type != 'tag') }}
    runs-on: ubuntu-latest
    strategy:
      fail-fast: true
      matrix:
        kubernetes: [v1.27.3]
    needs: ['lint', 'unit-test']
    steps:
      - name: Checkout
        uses: actions/checkout@v4

      - name: Set up Go 1.19
        uses: actions/setup-go@v4
        with:
          go-version: 1.19.13

      - name: Build provisioner-nfs image
        run: make provisioner-nfs-image

      - name: Build nfs-server-alpine image
        run: make nfs-server-image

      - name: Install NFS utils
        run: |
          sudo apt-get update && sudo apt-get install -y nfs-common

      - name: Setup Minikube-Kubernetes
        uses: medyagh/setup-minikube@latest
        with:
          cache: false
          minikube-version: 1.31.1
          driver: none
          kubernetes-version: ${{ matrix.kubernetes }}
          cni: calico
          start-args: '--install-addons=false'

      - name: Installation
        run: |
          ./tests/install-localpv.sh
          ./tests/install-nfs-provisioner.sh

      - name: Running sanity tests
        run: make sanity-test
  
  provisioner-nfs:
    runs-on: ubuntu-latest
    needs: ['lint', 'unit-test']
    steps:
      - name: Checkout
        uses: actions/checkout@v4

      - name: Set up Go 1.19
        uses: actions/setup-go@v3
        with:
          go-version: 1.19.13

      - name: Set Image Org
        # sets the default IMAGE_ORG to openebs
        run: |
          [ -z "${{ secrets.IMAGE_ORG }}" ] && IMAGE_ORG=openebs || IMAGE_ORG=${{ secrets.IMAGE_ORG}}
          echo "IMAGE_ORG=${IMAGE_ORG}" >> $GITHUB_ENV

      - name: Set CI Tag
        run: |
          BRANCH="${GITHUB_REF##*/}"
          CI_TAG=${BRANCH#v}-ci
          if [ ${BRANCH} = "develop" ]; then
            CI_TAG="ci"
          fi
          echo "TAG=${CI_TAG}" >> $GITHUB_ENV

      - name: Set Build Date
        id: date
        run: |
          echo "DATE=$(date -u +'%Y-%m-%dT%H:%M:%S%Z')" >> $GITHUB_OUTPUT

      - name: Docker meta
        id: docker_meta
        uses: docker/metadata-action@v4
        with:
          # add each registry to which the image needs to be pushed here
          images: |
            ${{ env.IMAGE_ORG }}/provisioner-nfs
            quay.io/${{ env.IMAGE_ORG }}/provisioner-nfs
            ghcr.io/${{ env.IMAGE_ORG }}/provisioner-nfs
          tags: |
            type=raw,value=latest,enable=false
            type=raw,value=${{ env.TAG }}

      - name: Print Tags
        run: |
          echo "${{ steps.docker_meta.outputs.tags }}"

      - name: Setup QEMU
        uses: docker/setup-qemu-action@v2
        with:
          platforms: all

      - name: Setup Docker Buildx
        id: buildx
        uses: docker/setup-buildx-action@v2
        with:
          version: v0.5.1

      - name: Login to DockerHub
        uses: docker/login-action@v2
        with:
          username: ${{ secrets.DOCKERHUB_USERNAME }}
          password: ${{ secrets.DOCKERHUB_TOKEN }}

      - name: Login to Quay
        uses: docker/login-action@v2
        with:
          registry: quay.io
          username: ${{ secrets.QUAY_USERNAME }}
          password: ${{ secrets.QUAY_TOKEN }}

      - name: Login to GHCR
        uses: docker/login-action@v2
        with:
          registry: ghcr.io
          username: ${{ github.actor }}
          password: ${{ secrets.GITHUB_TOKEN }}

      - name: Build and Push Image
        uses: docker/build-push-action@v4
        with:
          context: .
          file: ./buildscripts/provisioner-nfs/provisioner-nfs.Dockerfile
          push: true
          platforms: linux/amd64, linux/arm64, linux/arm/v7, linux/ppc64le
          tags: |
            ${{ steps.docker_meta.outputs.tags }}
          build-args: |
            DBUILD_DATE=${{ steps.date.outputs.DATE }}
            DBUILD_REPO_URL=https://github.com/openebs/dynamic-nfs-provisioner
            DBUILD_SITE_URL=https://openebs.io

  nfs-server:
    runs-on: ubuntu-latest
    needs: ['lint', 'unit-test']
    steps:
      - name: Checkout
        uses: actions/checkout@v4

      - name: Set Image Org
        # sets the default IMAGE_ORG to openebs
        run: |
          [ -z "${{ secrets.IMAGE_ORG }}" ] && IMAGE_ORG=openebs || IMAGE_ORG=${{ secrets.IMAGE_ORG}}
          echo "IMAGE_ORG=${IMAGE_ORG}" >> $GITHUB_ENV

      - name: Set CI Tag
        run: |
          BRANCH="${GITHUB_REF##*/}"
          CI_TAG=${BRANCH#v}-ci
          if [ ${BRANCH} = "develop" ]; then
            CI_TAG="ci"
          fi
          echo "TAG=${CI_TAG}" >> $GITHUB_ENV

      - name: Docker meta
        id: docker_meta
        uses: docker/metadata-action@v4
        with:
          # add each registry to which the image needs to be pushed here
          images: |
            ${{ env.IMAGE_ORG }}/nfs-server-alpine
            quay.io/${{ env.IMAGE_ORG }}/nfs-server-alpine
            ghcr.io/${{ env.IMAGE_ORG }}/nfs-server-alpine
          tags: |
            type=raw,value=latest,enable=false
            type=raw,value=${{ env.TAG }}

      - name: Print Tags
        run: |
          echo "${{ steps.docker_meta.outputs.tags }}"

      - name: Setup QEMU
        uses: docker/setup-qemu-action@v2
        with:
          platforms: all

      - name: Setup Docker Buildx
        id: buildx
        uses: docker/setup-buildx-action@v2
        with:
          version: v0.5.1

      - name: Login to DockerHub
        uses: docker/login-action@v2
        with:
          username: ${{ secrets.DOCKERHUB_USERNAME }}
          password: ${{ secrets.DOCKERHUB_TOKEN }}

      - name: Login to Quay
        uses: docker/login-action@v2
        with:
          registry: quay.io
          username: ${{ secrets.QUAY_USERNAME }}
          password: ${{ secrets.QUAY_TOKEN }}

      - name: Login to GHCR
        uses: docker/login-action@v2
        with:
          registry: ghcr.io
          username: ${{ github.actor }}
          password: ${{ secrets.GITHUB_TOKEN }}

      - name: Build and Push Image
        uses: docker/build-push-action@v4
        with:
          context: ./nfs-server-container
          file: nfs-server-container/Dockerfile
          push: true
          platforms: linux/amd64, linux/arm64, linux/arm/v7, linux/ppc64le
          tags: |
            ${{ steps.docker_meta.outputs.tags }}

  nfs-e2e:
    runs-on: ubuntu-latest
    steps:
      - name: Checkout
        uses: actions/checkout@v4

      - name: Set Image Org
        # sets the default IMAGE_ORG to openebs
        run: |
          [ -z "${{ secrets.IMAGE_ORG }}" ] && IMAGE_ORG=openebs || IMAGE_ORG=${{ secrets.IMAGE_ORG}}
          echo "IMAGE_ORG=${IMAGE_ORG}" >> $GITHUB_ENV
      - name: Login to Docker Hub
        uses: docker/login-action@v2
        with:
          username: ${{ secrets.DOCKERHUB_USERNAME }}
          password: ${{ secrets.DOCKERHUB_TOKEN }}

      - name: Build and push the nfs-e2e image
        uses: docker/build-push-action@v4
        with:
          file: ./e2e-tests/Dockerfile
          push: true
          load: false
          platforms: linux/amd64
          tags: |
            ${{ env.IMAGE_ORG }}/nfs-e2e:ci