Status: Development
A Schema File is a YAML file that describes the schema of a particular version. It defines the transformations that can be used to convert the telemetry data represented in any other older compatible version of the same schema family to this schema version.
Here is the structure of the Schema File:
# Defines the file format. MUST be set to 1.1.0.
file_format: 1.1.0
# The Schema URL that this file is published at. The version number in the URL
# MUST match the highest version number in the "versions" section below.
# Note: the schema version number in the URL is not related in any way to
# the file_format setting above.
schema_url: https://opentelemetry.io/schemas/1.2.0
# Definitions for each schema version in this family.
# Note: the ordering of versions is defined according to semver
# version number ordering rules.
versions:
<version_number_last>:
# definitions for this version. See details below.
<version_number_previous>:
# definitions for previous version
...
<version_number_first>:
# Defines the first version.Each <version_number> section has the following structure:
<version_number>:
all:
changes:
# sequence of transformations.
resources:
changes:
# sequence of transformations.
spans:
changes:
# sequence of transformations.
span_events:
changes:
# sequence of transformations.
metrics:
changes:
# sequence of transformations.
logs:
changes:
# sequence of transformations.There are 6 sub-sections under each version definition: "all", "resources", "spans", "span_events", "metrics", "logs". The last 5 sub-sections in this list contain definitions that apply only to the corresponding telemetry data type. Section "all" contains definitions that apply to all types of telemetry data.
Below we describe each section in detail.
"all" section in the schema file defines transformations. It must contain a sub-section named "changes" that defines how attributes were renamed from the previous version to this version.
The "changes" section is a sequence of transformations. Only one transformation is supported for section "all": "rename_attributes" transformation.
"rename_attributes" transformation requires a map of key/value pairs, where the key is the old name of the attribute used in the previous version, the value is the new name of the attribute starting from this version. Here is the structure:
all:
changes:
- rename_attributes:
attribute_map:
# map of key/values.The transformations in section "all" apply to the following telemetry data: resource attributes, span attributes, span event attributes, log attributes, metric attributes.
Important: when converting from the previous version to the current version the transformation sequence in section "all" is performed first. After that the transformations in the specific section ("resources", "spans", "span_events", "metrics" or "logs") that correspond to the data type that is being converted are applied.
Note that "rename_attributes" transformation in most cases is reversible. It is possible to apply it backwards, so that telemetry data is converted from this version to the previous version. The only exception is when 2 or more different attributes in the previous version are renamed to the same attribute in the new version. In that case the reverse transformation is not possible since it would be ambiguous. When the reverse transformation is not possible it is considered an incompatible change. In this case the MAJOR version number of the schema SHOULD be increased in the new version.
"resources" section is very similar in its structure to "all". Like section "all" the transformations in section "resources" may contain only "rename_attributes" transformation.
The only difference from section "all" is that this transformation is only applicable to Resource data type.
Here is the structure:
resources:
changes:
- rename_attributes:
attribute_map:
# map of key/values. The keys are the old attribute name used
# the previous version, the values are the new attribute name
# starting from this version."spans" section in the schema file defines transformations that are applicable only to Span data type. It must contain a sub-section named "changes" that defines a sequence of actions to be applied to convert Spans from the previous version to this version.
One transformation is supported for section "span": "rename_attributes".
This is similar to the "rename_attributes" transformation supported in "all" and "resource" sections. In addition it is also possible to optionally specify spans that the transformation should apply to. Here is the structure:
spans:
changes:
- rename_attributes:
attribute_map:
# map of key/values. The keys are the old attribute name used
# in the previous version, the values are the new attribute name
# starting from this version.
apply_to_spans:
# Optional. If it is missing the transformation is applied
# to all spans. If it is present the transformation is applied
# only to the spans with the name that is found in the sequence
# specified below."spans_events" section in the schema file defines transformations that are applicable only to Span's Event data type. It must contain a sub-section named "changes" that defines a sequence of actions to be applied to convert events from the previous version to this version.
Two transformations are supported for section "spans_events": "rename_events" and "rename_attributes".
This transformation allows to change event names. It is applied to all events or only to events of spans that have the specified name. Here is the structure:
span_events:
changes:
- rename_events:
name_map:
# The keys are old event name used in the previous version, the
# values are the new event name starting from this version.This is similar to the "rename_attributes" transformation supported in "all" and "resource" sections. In addition it is also possible to optionally specify spans and events that the transformation should apply to (both optional conditions must match, if specified, for transformation to be applicable). Here is the structure:
span_events:
changes:
- rename_attributes:
attribute_map:
# map of key/values. The keys are the old attribute name used
# in the previous version, the values are the new attribute name
# starting from this version.
apply_to_spans:
# Optional span names to apply to. If empty applies to all spans.
apply_to_events:
# Optional event names to apply to. If empty applies to all events."metrics" section in the schema file defines transformations that are applicable only to Metric data type. It must contain a sub-section named "changes" that defines a sequence of actions to be applied to convert metrics from the previous version to this version.
Three transformations are supported for section "metrics": "rename_metrics", "rename_attributes" and "split".
This transformation allows to change metric names. It is applied to all metrics. Here is the structure:
metrics:
changes:
- rename_metrics:
# map of key/values. The keys are the old metric name used
# in the previous version, the values are the new metric name
# starting from this version.This is similar to the "rename_attributes" transformation supported in "span" sections. Here is the structure:
metrics:
changes:
- rename_attributes:
attribute_map:
# map of key/values. The keys are the old attribute name used
# in the previous version, the values are the new attribute name
# starting from this version.
apply_to_metrics:
# Optional. If it is missing the transformation is applied
# to all metrics. If it is present the transformation is applied
# only to the metrics with the name that is found in the sequence
# specified below.This transformation splits a metric into several metrics and eliminates an attribute. Here is the structure:
metrics:
changes:
- split:
# Name of old metric to split.
apply_to_metric:
# Name of attribute in the old metric to use for splitting. The attribute will be
# eliminated, the new metric will not have it.
by_attribute:
# Names of new metrics to create, one for each possible value of attribute.
metrics_from_attributes:
# map of key/values. The keys are the new metric name starting from this
# version, the values are the old attribute value used in the previous version."logs" section in the schema file defines transformations that are applicable only to the Log Record data type. It must contain a sub-section named "changes" that defines a sequence of actions to be applied to convert logs from the previous version to this version.
One transformation is supported for section "logs": "rename_attributes".
This is similar to the "rename_attributes" transformation supported in "spans" section. Here is the structure:
logs:
changes:
- rename_attributes:
attribute_map:
# map of key/values. The keys are the old attribute name used
# the previous version, the values are the new attribute name
# starting from this version.When converting from older version X to newer version Y of the schema (both belonging to the same schema family) the transformations specified in each version in the range [X..Y] are applied one by one, i.e. first we convert from X to X+1, then from X+1 to X+2, ..., Y-2 to Y-1, Y-1 to Y. (Note, version numbers are not a continuum of integer numbers. The notion of adding a natural number 1 to the version number is a placeholder for the phrase "next newer version number that is defined for this schema family".)
The transformations that are listed for a particular version X describe changes that happened since the schema version that precedes version X and belongs to the same schema family. These transformations are listed in 6 sections: "all", "resources", "spans", "span_events", "metrics", "logs". Here is the order in which the transformations are applied:
-
Transformations in section "all" always are applied first, before any of the transformations in the other 5 sections.
-
Transformations in section "spans" are applied before transformations in section "span_events".
-
The order in which the transformations in remaining sections ("resources", "metrics", logs") are applied relative to each other or relative to "spans" section is undefined (since there are not-interdependencies, the order does not matter).
In the "changes" subsection of each particular one of these 6 sections the sequence of transformations is applied in the order it is listed in the schema file, from top to bottom.
When converting in the opposite direction, from newer version Y to older version X the order of transformation listed above is exactly the reverse, with each individual transformation also performing the reverse conversion.
The "file_format" setting in the schema file specifies the format version of the file. The format version follows the MAJOR.MINOR.PATCH format, similar to semver 2.0.
The "file_format" setting is used by consumers of the file to know if they are capable of interpreting the content of the file.
The current value for this setting is "1.1.0". Any change to this number MUST be published in the specification.
The current schema file format allows representing a limited set of transformations of telemetry data. We anticipate that in the future more types of transformations may be desirable to support or other, additional information may be desirable to record in the schema file.
As the schema file format evolves over time the format version number SHOULD change according to the following rules:
-
PATCH number SHOULD be increased when the file format changes in a way that does not affect the existing consumers of the file. For example addition of a completely new section in the schema file that has no effect on existing sections and has no effect on any existing schema functionality may be done via incrementing the PATCH number only. This approach is only valid if the new setting in the file is completely and safely ignorable by all existing processing logic.
For example adding a completely new section that describes the full state of the schema has no effect on existing consumers which only care about "changes" section (unless we explicitly define the semantics of the new section such that it needs to be taken into account when processing schema changes). So, adding such a new section can be done using a PATCH number increase.
-
MINOR number SHOULD be increased if a new setting is added to the file format in a backward compatible manner. "Backward compatible" in this context means that consumers that are aware of the new MINOR number can consume the file of a particular MINOR version number or of any MINOR version number lower than that, provided that MAJOR version numbers are the same. This can happen for example when:
-
A new transformation type is added.
-
A new setting is added to an existing transformation. The new setting is optional and the default value of the setting matches the behavior of the previous file format version.
Note: there is no "forward compatibility" based on MINOR version number. Consumers which support reading up to a particular MINOR version number SHOULD NOT attempt to consume files with higher MINOR version numbers.
-
-
MAJOR number SHOULD be increased if the file format is changed in an incompatible way. This means the consumers of the file need to parse or interpret the file differently compared to previous MAJOR version.
Correspondingly:
-
Consumers of the schema file SHOULD NOT attempt to interpret the schema file if the MAJOR version number is different (higher or lower) than what the consumer supports.
-
Consumers of the schema file SHOULD NOT attempt to interpret the schema file if the MINOR version number is higher than what the consumer supports.
-
Consumers MAY ignore the PATCH number.
To illustrate this with some examples:
| File Format Version | Consumer's Expected Version | Consumer Can Read? |
| 1.0.0 | 1.0.0 | yes |
| 1.0.x | 1.0.y | yes, for any x and y. |
| 1.a.x | 1.b.x | if a<b then yes, otherwise no. |
| 2.0.0 | 1.x.y | no |
# Defines the file format. MUST be set to 1.1.0.
file_format: 1.1.0
# The Schema URL that this file is published at. The version number in the URL
# MUST match the highest version number in the "versions" section below.
# Note: the schema version number in the URL is not related in any way to
# the file_format setting above.
schema_url: https://opentelemetry.io/schemas/1.1.0
# Definitions for each schema version in this family.
# Note: the ordering of versions is defined according to semver
# version number ordering rules.
versions:
1.1.0:
# Definitions for version 1.1.0.
all:
# Definitions that apply to all data types.
changes:
# Transformations to apply when converting from version 1.0.0 to 1.1.0.
- rename_attributes:
# map of key/values. The keys are the old attribute name used
# the previous version, the values are the new attribute name
# starting from this version.
# Rename k8s.* to kubernetes.*
k8s.cluster.name: kubernetes.cluster.name
k8s.namespace.name: kubernetes.namespace.name
k8s.node.name: kubernetes.node.name
k8s.node.uid: kubernetes.node.uid
k8s.pod.name: kubernetes.pod.name
k8s.pod.uid: kubernetes.pod.uid
k8s.container.name: kubernetes.container.name
k8s.replicaset.name: kubernetes.replicaset.name
k8s.replicaset.uid: kubernetes.replicaset.uid
k8s.cronjob.name: kubernetes.cronjob.name
k8s.cronjob.uid: kubernetes.cronjob.uid
k8s.job.name: kubernetes.job.name
k8s.job.uid: kubernetes.job.uid
k8s.statefulset.name: kubernetes.statefulset.name
k8s.statefulset.uid: kubernetes.statefulset.uid
k8s.daemonset.name: kubernetes.daemonset.name
k8s.daemonset.uid: kubernetes.daemonset.uid
k8s.deployment.name: kubernetes.deployment.name
k8s.deployment.uid: kubernetes.deployment.uid
resources:
# Definitions that apply to Resource data type.
changes:
- rename_attributes:
telemetry.auto.version: telemetry.auto_instr.version
spans:
# Definitions that apply to Span data type.
changes:
- rename_attributes:
attribute_map:
# map of key/values. The keys are the old attribute name used
# in the previous version, the values are the new attribute name
# starting from this version.
peer.service: peer.service.name
apply_to_spans:
# apply only to spans named "HTTP GET"
- "HTTP GET"
span_events:
# Definitions that apply to Span Event data type.
changes:
- rename_events:
# The keys are old event name used in the previous version, the
# values are the new event name starting from this version.
name_map: {stacktrace: stack_trace}
- rename_attributes:
attribute_map:
peer.service: peer.service.name
apply_to_events:
# Optional event names to apply to. If empty applies to all events.
- exception.stack_trace
metrics:
# Definitions that apply to Metric data type.
changes:
- rename_metrics:
# map of key/values. The keys are the old metric name used
# in the previous version, the values are the new metric name
# starting from this version.
container.cpu.usage.total: cpu.usage.total
container.memory.usage.max: memory.usage.max
- rename_attributes:
attribute_map:
status: state
apply_to_metrics:
# Optional. If it is missing the transformation is applied
# to all metrics. If it is present the transformation is applied
# only to the metrics with the name that is found in the sequence
# specified below.
- system.cpu.utilization
- system.memory.usage
- system.memory.utilization
- system.paging.usage
- split:
# Example from the change done by https://github.com/open-telemetry/opentelemetry-specification/pull/2617
# Name of old metric to split.
apply_to_metric: system.paging.operations
# Name of attribute in the old metric to use for splitting. The attribute will be
# eliminated, the new metric will not have it.
by_attribute: direction
# Names of new metrics to create, one for each possible value of attribute.
metrics_from_attributes:
# If "direction" attribute equals "in" create a new metric called "system.paging.operations.in".
system.paging.operations.in: in
# If "direction" attribute equals "out" create a new metric called "system.paging.operations.out".
system.paging.operations.out: out
logs:
# Definitions that apply to LogRecord data type.
changes:
- rename_attributes:
attribute_map:
process.executable_name: process.executable.name
1.0.0:
# First version of this schema family.