diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 039de301bcb9..c1d9c1600357 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1280,37 +1280,36 @@
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif
+#if HAS_BED_PROBE && EITHER(HAS_LCD_MENU, HAS_TFT_LVGL_UI)
+ //#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
+ #if ENABLED(PROBE_OFFSET_WIZARD)
+ /**
+ * Enable to init the Probe Z-Offset when starting the Wizard.
+ * Use a height slightly above the estimated nozzle-to-probe Z offset.
+ * For example, with an offset of -5, consider a starting height of -4.
+ */
+ //#define PROBE_OFFSET_WIZARD_START_Z -4.0
+
+ // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
+ //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
+ #endif
+#endif
+
#if HAS_LCD_MENU
// Add Probe Z Offset calibration to the Z Probe Offsets menu
- #if HAS_BED_PROBE
- //#define PROBE_OFFSET_WIZARD
- #if ENABLED(PROBE_OFFSET_WIZARD)
- //
- // Enable to init the Probe Z-Offset when starting the Wizard.
- // Use a height slightly above the estimated nozzle-to-probe Z offset.
- // For example, with an offset of -5, consider a starting height of -4.
- //
- //#define PROBE_OFFSET_WIZARD_START_Z -4.0
-
- // Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
- //#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
- #endif
-
- #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
- // Add a calibration procedure in the Probe Offsets menu
- // to compensate for twist in the X-axis.
- //#define X_AXIS_TWIST_COMPENSATION
- #if ENABLED(X_AXIS_TWIST_COMPENSATION)
- /**
- * Enable to init the Probe Z-Offset when starting the Wizard.
- * Use a height slightly above the estimated nozzle-to-probe Z offset.
- * For example, with an offset of -5, consider a starting height of -4.
- */
- #define XATC_START_Z 0.0
- #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
- #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
- #endif
+ #if BOTH(HAS_BED_PROBE, AUTO_BED_LEVELING_BILINEAR)
+ // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
+ //#define X_AXIS_TWIST_COMPENSATION
+ #if ENABLED(X_AXIS_TWIST_COMPENSATION)
+ /**
+ * Enable to init the Probe Z-Offset when starting the Wizard.
+ * Use a height slightly above the estimated nozzle-to-probe Z offset.
+ * For example, with an offset of -5, consider a starting height of -4.
+ */
+ #define XATC_START_Z 0.0
+ #define XATC_MAX_POINTS 3 // Number of points to probe in the wizard
+ #define XATC_Y_POSITION Y_CENTER // (mm) Y position to probe
#endif
#endif
diff --git a/Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp b/Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp
index 93d34a85785c..aee5573283e7 100644
--- a/Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp
+++ b/Marlin/src/lcd/extui/mks_ui/draw_level_settings.cpp
@@ -36,7 +36,8 @@ enum {
ID_LEVEL_RETURN = 1,
ID_LEVEL_POSITION,
ID_LEVEL_COMMAND,
- ID_LEVEL_ZOFFSET
+ ID_LEVEL_ZOFFSET,
+ ID_Z_OFFSET_WIZARD
};
static void event_handler(lv_obj_t *obj, lv_event_t event) {
@@ -57,6 +58,11 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) {
case ID_LEVEL_ZOFFSET:
lv_draw_auto_level_offset_settings();
break;
+ #if ENABLED(PROBE_OFFSET_WIZARD)
+ case ID_Z_OFFSET_WIZARD:
+ lv_draw_z_offset_wizard();
+ break;
+ #endif
#endif
}
}
@@ -67,6 +73,9 @@ void lv_draw_level_settings() {
lv_screen_menu_item(scr, machine_menu.LevelingAutoCommandConf, PARA_UI_POS_X, PARA_UI_POS_Y * 2, event_handler, ID_LEVEL_COMMAND, 1);
#if HAS_BED_PROBE
lv_screen_menu_item(scr, machine_menu.LevelingAutoZoffsetConf, PARA_UI_POS_X, PARA_UI_POS_Y * 3, event_handler, ID_LEVEL_ZOFFSET, 2);
+ #if ENABLED(PROBE_OFFSET_WIZARD)
+ lv_screen_menu_item(scr, machine_menu.LevelingZoffsetWizard, PARA_UI_POS_X, PARA_UI_POS_Y * 4, event_handler, ID_Z_OFFSET_WIZARD, 3);
+ #endif
#endif
lv_big_button_create(scr, "F:/bmp_back70x40.bin", common_menu.text_back, PARA_UI_BACK_POS_X + 10, PARA_UI_BACK_POS_Y, event_handler, ID_LEVEL_RETURN, true);
}
diff --git a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp
index aa6fe5e063ed..d3f192e44f70 100644
--- a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp
+++ b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp
@@ -456,6 +456,10 @@ char *getDispText(int index) {
}
break;
case MOVE_MOTOR_UI: strcpy(public_buf_l, move_menu.title); break;
+
+ #if ENABLED(PROBE_OFFSET_WIZARD)
+ case Z_OFFSET_WIZARD_UI: break;
+ #endif
case OPERATE_UI:
switch (disp_state_stack._disp_state[disp_state_stack._disp_index]) {
IF_DISABLED(TFT35, case OPERATE_UI: case PAUSE_UI:)
@@ -785,6 +789,10 @@ void GUI_RefreshPage() {
case MOVE_MOTOR_UI: break;
+ #if ENABLED(PROBE_OFFSET_WIZARD)
+ case Z_OFFSET_WIZARD_UI: break;
+ #endif
+
#if ENABLED(MKS_WIFI_MODULE)
case WIFI_UI:
if (temps_update_flag) {
@@ -885,6 +893,9 @@ void clear_cur_ui() {
case PRINT_FILE_UI: lv_clear_print_file(); break;
case PRINTING_UI: lv_clear_printing(); break;
case MOVE_MOTOR_UI: lv_clear_move_motor(); break;
+ #if ENABLED(PROBE_OFFSET_WIZARD)
+ case Z_OFFSET_WIZARD_UI: lv_clear_z_offset_wizard(); break;
+ #endif
case OPERATE_UI: lv_clear_operation(); break;
case PAUSE_UI: break;
case EXTRUSION_UI: lv_clear_extrusion(); break;
@@ -993,6 +1004,9 @@ void draw_return_ui() {
break;
case MOVE_MOTOR_UI: lv_draw_move_motor(); break;
+ #if ENABLED(PROBE_OFFSET_WIZARD)
+ case Z_OFFSET_WIZARD_UI: lv_draw_z_offset_wizard(); break;
+ #endif
case OPERATE_UI: lv_draw_operation(); break;
case PAUSE_UI: break;
case EXTRUSION_UI: lv_draw_extrusion(); break;
diff --git a/Marlin/src/lcd/extui/mks_ui/draw_ui.h b/Marlin/src/lcd/extui/mks_ui/draw_ui.h
index 950386f878e5..798e662220ef 100644
--- a/Marlin/src/lcd/extui/mks_ui/draw_ui.h
+++ b/Marlin/src/lcd/extui/mks_ui/draw_ui.h
@@ -69,6 +69,7 @@
#include "draw_max_feedrate_settings.h"
#include "draw_tmc_step_mode_settings.h"
#include "draw_level_settings.h"
+#include "draw_z_offset_wizard.h"
#include "draw_tramming_pos_settings.h"
#include "draw_auto_level_offset_settings.h"
#include "draw_filament_change.h"
@@ -266,6 +267,7 @@ typedef enum {
PRINT_FILE_UI,
PRINTING_UI,
MOVE_MOTOR_UI,
+ Z_OFFSET_WIZARD_UI,
OPERATE_UI,
PAUSE_UI,
EXTRUSION_UI,
diff --git a/Marlin/src/lcd/extui/mks_ui/draw_z_offset_wizard.cpp b/Marlin/src/lcd/extui/mks_ui/draw_z_offset_wizard.cpp
new file mode 100644
index 000000000000..d95efd862ba9
--- /dev/null
+++ b/Marlin/src/lcd/extui/mks_ui/draw_z_offset_wizard.cpp
@@ -0,0 +1,228 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#include "../../../inc/MarlinConfigPre.h"
+
+#if BOTH(HAS_TFT_LVGL_UI, PROBE_OFFSET_WIZARD)
+
+#include "draw_ui.h"
+#include
+
+#include "../../../gcode/queue.h"
+#include "../../../module/motion.h"
+
+#include "../../../module/planner.h"
+#include "../../../inc/MarlinConfig.h"
+#include "../../../module/probe.h"
+
+#if HAS_LEVELING
+ #include "../../../feature/bedlevel/bedlevel.h"
+ bool leveling_was_active;
+#endif
+
+extern lv_group_t *g;
+static lv_obj_t *scr;
+
+static lv_obj_t *labelV, *buttonV, *labelP;
+static lv_obj_t *labelP_z_offset_ref;
+static lv_task_t *updatePosTask;
+static char cur_label = 'Z';
+static float cur_pos = 0;
+static float cur_OffsetPos = 0;
+
+// Global storage
+float z_offset_backup, calculated_z_offset, z_offset_ref;
+
+enum {
+ ID_M_Z_P = 1,
+ ID_M_Z_N,
+ ID_M_STEP,
+ ID_M_SAVE,
+ ID_M_RETURN
+};
+
+void disp_cur_wizard_pos() {
+ char str_1[18];
+ sprintf_P(public_buf_l, PSTR("%c:%s mm"), cur_label, dtostrf(cur_pos, 1, 3, str_1));
+ if (labelP) lv_label_set_text(labelP, public_buf_l);
+
+ sprintf_P(public_buf_l, PSTR("%c Offset:%s mm"), cur_label, dtostrf(cur_OffsetPos, 1, 3, str_1));
+ if (labelP_z_offset_ref) lv_label_set_text(labelP_z_offset_ref, public_buf_l);
+}
+
+static void event_handler(lv_obj_t *obj, lv_event_t event) {
+ char str_1[16];
+ if (event != LV_EVENT_RELEASED) return;
+ //lv_clear_z_offset_wizard();
+ if (!queue.ring_buffer.full(3)) {
+ bool do_inject = true;
+ float dist = uiCfg.move_dist;
+ switch (obj->mks_obj_id) {
+ case ID_M_Z_N: dist *= -1; case ID_M_Z_P: cur_label = 'Z'; break;
+ default: do_inject = false;
+ }
+ if (do_inject) {
+ sprintf_P(public_buf_l, PSTR("G91\nG1 %c%s F%d\nG90"), cur_label, dtostrf(dist, 1, 3, str_1), uiCfg.moveSpeed);
+ queue.inject(public_buf_l);
+ //calculated_z_offset = probe.offset.z + current_position.z - z_offset_ref;
+ disp_cur_wizard_pos();
+ }
+ }
+
+ switch (obj->mks_obj_id) {
+ case ID_M_STEP:
+ if (ABS((int)(10 * uiCfg.move_dist)) == 10)
+ uiCfg.move_dist = 0.025;
+ else if (ABS((int)(1000 * uiCfg.move_dist)) == 25)
+ uiCfg.move_dist = 0.1;
+ else
+ uiCfg.move_dist *= 10.0f;
+ disp_move_wizard_dist();
+ break;
+ case ID_M_SAVE:
+ current_position.z = z_offset_ref; // Set Z to z_offset_ref, as we can expect it is at probe height
+ probe.offset.z = calculated_z_offset;
+ sync_plan_position();
+ // Raise Z as if it was homed
+ do_z_clearance(Z_POST_CLEARANCE);
+ watchdog_refresh();
+ draw_return_ui();
+ return;
+ case ID_M_RETURN:
+ probe.offset.z = z_offset_backup;
+ SET_SOFT_ENDSTOP_LOOSE(false);
+ TERN_(HAS_LEVELING, set_bed_leveling_enabled(leveling_was_active));
+ #if HOMING_Z_WITH_PROBE && defined(PROBE_OFFSET_WIZARD_START_Z)
+ set_axis_never_homed(Z_AXIS); // On cancel the Z position needs correction
+ queue.inject_P(PSTR("G28Z"));
+ #else // Otherwise do a Z clearance move like after Homing
+ do_z_clearance(Z_POST_CLEARANCE);
+ #endif
+ watchdog_refresh();
+ draw_return_ui();
+ return;
+ }
+ disp_cur_wizard_pos();
+}
+
+void refresh_wizard_pos(lv_task_t *) {
+ switch (cur_label) {
+ case 'Z':
+ cur_pos = current_position.z;
+ calculated_z_offset = probe.offset.z + current_position.z - z_offset_ref;
+ cur_OffsetPos = calculated_z_offset;
+ break;
+ default: return;
+ }
+ disp_cur_wizard_pos();
+}
+
+void lv_draw_z_offset_wizard() {
+
+ set_all_unhomed();
+
+ // Store probe.offset.z for Case: Cancel
+ z_offset_backup = probe.offset.z;
+
+ #ifdef PROBE_OFFSET_WIZARD_START_Z
+ probe.offset.z = PROBE_OFFSET_WIZARD_START_Z;
+ #endif
+
+ // Store Bed-Leveling-State and disable
+ #if HAS_LEVELING
+ leveling_was_active = planner.leveling_active;
+ set_bed_leveling_enabled(leveling_was_active);
+ #endif
+
+ queue.inject_P(PSTR("G28"));
+
+ z_offset_ref = 0; // Set Z Value for Wizard Position to 0
+ calculated_z_offset = probe.offset.z + current_position.z - z_offset_ref;
+ cur_OffsetPos = calculated_z_offset;
+
+ scr = lv_screen_create(Z_OFFSET_WIZARD_UI, machine_menu.LevelingZoffsetTitle);
+
+ lv_obj_t *buttonXI = lv_big_button_create(scr, "F:/bmp_zAdd.bin", move_menu.z_add, INTERVAL_V, titleHeight, event_handler, ID_M_Z_P);
+ lv_obj_clear_protect(buttonXI, LV_PROTECT_FOLLOW);
+ lv_big_button_create(scr, "F:/bmp_zDec.bin", move_menu.z_dec, INTERVAL_V * 3, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_M_Z_N);
+
+ // button with image and label changed dynamically by disp_move_dist
+ buttonV = lv_imgbtn_create(scr, nullptr, BTN_X_PIXEL * 3 + INTERVAL_V * 4, titleHeight, event_handler, ID_M_STEP);
+ labelV = lv_label_create_empty(buttonV);
+ #if HAS_ROTARY_ENCODER
+ if (gCfgItems.encoder_enable) lv_group_add_obj(g, buttonV);
+ #endif
+
+ // save and back
+ lv_big_button_create(scr, "F:/bmp_return.bin", common_menu.text_save, BTN_X_PIXEL * 2 + INTERVAL_V * 3, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_M_SAVE);
+ // cancel and back
+ lv_big_button_create(scr, "F:/bmp_return.bin", common_menu.text_back, BTN_X_PIXEL * 3 + INTERVAL_V * 4, BTN_Y_PIXEL + INTERVAL_H + titleHeight, event_handler, ID_M_RETURN);
+
+ // We need to patch the title to leave some space on the right for displaying the status
+ lv_obj_t * z_offset_ref_title = lv_obj_get_child_back(scr, nullptr);
+ if (z_offset_ref_title != nullptr) lv_obj_set_width(z_offset_ref_title, (int)(TFT_WIDTH / 2) - 101);
+ labelP_z_offset_ref = lv_label_create(scr, (int)(TFT_WIDTH / 2) - 80, (int)(TFT_HEIGHT/2)-20, "Z Offset:0.0mm");
+
+ // We need to patch the Z Offset to leave some space in the middle for displaying the status
+ lv_obj_t * title= lv_obj_get_child_back(scr, nullptr);
+ if (title != nullptr) lv_obj_set_width(title, TFT_WIDTH - 101);
+ labelP = lv_label_create(scr, TFT_WIDTH - 100, TITLE_YPOS, "Z:0.0mm");
+
+ if (labelP != nullptr)
+ updatePosTask = lv_task_create(refresh_wizard_pos, 300, LV_TASK_PRIO_LOWEST, 0);
+
+ disp_move_wizard_dist();
+ disp_cur_wizard_pos();
+}
+
+void disp_move_wizard_dist() {
+ if ((int)(1000 * uiCfg.move_dist) == 25)
+ lv_imgbtn_set_src_both(buttonV, "F:/bmp_step_move0_1.bin");
+ else if ((int)(10 * uiCfg.move_dist) == 1)
+ lv_imgbtn_set_src_both(buttonV, "F:/bmp_step_move1.bin");
+ else if ((int)(10 * uiCfg.move_dist) == 10)
+ lv_imgbtn_set_src_both(buttonV, "F:/bmp_step_move10.bin");
+
+ if (gCfgItems.multiple_language) {
+ if ((int)(1000 * uiCfg.move_dist) == 25) {
+ lv_label_set_text(labelV, move_menu.step_0025mm);
+ lv_obj_align(labelV, buttonV, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+ }
+ else if ((int)(10 * uiCfg.move_dist) == 1) {
+ lv_label_set_text(labelV, move_menu.step_01mm);
+ lv_obj_align(labelV, buttonV, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+ }
+ else if ((int)(10 * uiCfg.move_dist) == 10) {
+ lv_label_set_text(labelV, move_menu.step_1mm);
+ lv_obj_align(labelV, buttonV, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET);
+ }
+ }
+}
+
+void lv_clear_z_offset_wizard() {
+ #if HAS_ROTARY_ENCODER
+ if (gCfgItems.encoder_enable) lv_group_remove_all_objs(g);
+ #endif
+ lv_obj_del(scr);
+}
+
+#endif // HAS_TFT_LVGL_UI && PROBE_OFFSET_WIZARD
diff --git a/Marlin/src/lcd/extui/mks_ui/draw_z_offset_wizard.h b/Marlin/src/lcd/extui/mks_ui/draw_z_offset_wizard.h
new file mode 100644
index 000000000000..47a3d69c46d9
--- /dev/null
+++ b/Marlin/src/lcd/extui/mks_ui/draw_z_offset_wizard.h
@@ -0,0 +1,36 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#ifdef __cplusplus
+ extern "C" { /* C-declarations for C++ */
+#endif
+
+void lv_draw_z_offset_wizard();
+void refresh_wizard_pos();
+void disp_cur_wizard_pos();
+void disp_move_wizard_dist();
+void lv_clear_z_offset_wizard();
+
+#ifdef __cplusplus
+ } /* C-declarations for C++ */
+#endif
diff --git a/Marlin/src/lcd/extui/mks_ui/tft_Language_en.h b/Marlin/src/lcd/extui/mks_ui/tft_Language_en.h
index a41864eec479..5195986e3584 100644
--- a/Marlin/src/lcd/extui/mks_ui/tft_Language_en.h
+++ b/Marlin/src/lcd/extui/mks_ui/tft_Language_en.h
@@ -103,6 +103,8 @@
#define LEVELING_AUTO_COMMAND_EN "AutoLeveling command settings"
#define LEVELING_AUTO_ZOFFSET_EN "Nozzle-to-probe offsets settings"
+#define LEVELING_ZOFFSET_TITLE_EN "Machine Settings>Z Offset Wizard"
+
#define LEVELING_PARA_CONF_TITLE_EN "leveling setting"
#define AUTO_LEVELING_ENABLE_EN "Enable auto leveling"
#define BLTOUCH_LEVELING_ENABLE_EN "Enable BLTouch"
@@ -293,6 +295,7 @@
#define CLOSE_TEXT_EN "Close"
#define BACK_TEXT_EN "Back"
+#define SAVE_TEXT_EN "Save"
#define TOOL_PREHEAT_EN "Preheat"
#define TOOL_EXTRUDE_EN "Extrusion"
diff --git a/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp b/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp
index c69ccf65872b..6e9c37b0169e 100644
--- a/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp
+++ b/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp
@@ -578,6 +578,8 @@ void machine_setting_disp() {
machine_menu.OutLength = FILAMENT_OUT_LENGTH_EN;
machine_menu.OutSpeed = FILAMENT_OUT_SPEED_EN;
+ machine_menu.LevelingZoffsetTitle = LEVELING_ZOFFSET_TITLE_EN;
+
machine_menu.LevelingParaConfTitle = LEVELING_CONF_TITLE_EN;
machine_menu.LevelingParaConf = LEVELING_PARA_CONF_EN;
machine_menu.TrammingPosConf = TRAMMING_POS_EN;
@@ -767,11 +769,12 @@ void disp_language_init() {
move_menu.z_add = AXIS_Z_ADD_TEXT;
move_menu.z_dec = AXIS_Z_DEC_TEXT;
- move_menu.step_001mm = TEXT_001MM;
- move_menu.step_005mm = TEXT_005MM;
- move_menu.step_01mm = TEXT_01MM;
- move_menu.step_1mm = TEXT_1MM;
- move_menu.step_10mm = TEXT_10MM;
+ move_menu.step_001mm = TEXT_001MM;
+ move_menu.step_0025mm = TEXT_0025MM;
+ move_menu.step_005mm = TEXT_005MM;
+ move_menu.step_01mm = TEXT_01MM;
+ move_menu.step_1mm = TEXT_1MM;
+ move_menu.step_10mm = TEXT_10MM;
home_menu.home_x = HOME_X_TEXT;
home_menu.home_y = HOME_Y_TEXT;
@@ -1346,6 +1349,7 @@ void disp_language_init() {
case LANG_ENGLISH:
common_menu.dialog_confirm_title = TITLE_DIALOG_CONFIRM_EN;
common_menu.text_back = BACK_TEXT_EN;
+ common_menu.text_save = SAVE_TEXT_EN;
common_menu.close_machine_tips = DIALOG_CLOSE_MACHINE_EN;
common_menu.unbind_printer_tips = DIALOG_UNBIND_PRINTER_EN;
common_menu.print_special_title = PRINTING_OTHER_LANGUGE;
diff --git a/Marlin/src/lcd/extui/mks_ui/tft_multi_language.h b/Marlin/src/lcd/extui/mks_ui/tft_multi_language.h
index 0d0285f322af..2a5135dded4f 100644
--- a/Marlin/src/lcd/extui/mks_ui/tft_multi_language.h
+++ b/Marlin/src/lcd/extui/mks_ui/tft_multi_language.h
@@ -101,6 +101,8 @@ typedef struct machine_common_disp {
const char *OutLength;
const char *OutSpeed;
+ const char *LevelingZoffsetTitle;
+
const char *LevelingParaConfTitle;
const char *LevelingParaConf;
const char *TrammingPosConf;
@@ -294,6 +296,7 @@ extern machine_common_def machine_menu;
typedef struct common_menu_disp {
const char *text_back;
+ const char *text_save;
const char *dialog_confirm_title;
const char *close_machine_tips;
const char *unbind_printer_tips;
@@ -355,6 +358,7 @@ typedef struct move_menu_disp {
const char *z_add;
const char *z_dec;
const char *step_001mm;
+ const char *step_0025mm;
const char *step_005mm;
const char *step_01mm;
const char *step_1mm;
@@ -777,6 +781,7 @@ extern eeprom_def eeprom_menu;
#define AXIS_Z_ADD_TEXT "Z+"
#define AXIS_Z_DEC_TEXT "Z-"
#define TEXT_001MM "0.01 mm"
+#define TEXT_0025MM "0.025 mm"
#define TEXT_005MM "0.05 mm"
#define TEXT_01MM "0.1 mm"
#define TEXT_1MM "1 mm"
diff --git a/Marlin/src/lcd/menu/menu_probe_offset.cpp b/Marlin/src/lcd/menu/menu_probe_offset.cpp
index add739553380..ae785fa641cb 100644
--- a/Marlin/src/lcd/menu/menu_probe_offset.cpp
+++ b/Marlin/src/lcd/menu/menu_probe_offset.cpp
@@ -45,15 +45,7 @@ void _goto_manual_move_z(const_float_t);
float z_offset_backup, calculated_z_offset, z_offset_ref;
inline void z_clearance_move() {
- do_z_clearance(
- #ifdef Z_AFTER_HOMING
- Z_AFTER_HOMING
- #elif defined(Z_HOMING_HEIGHT)
- Z_HOMING_HEIGHT
- #else
- 10
- #endif
- );
+ do_z_clearance(Z_POST_CLEARANCE);
}
void set_offset_and_go_back(const_float_t z) {
diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h
index d9c50b01251f..752e83f46785 100644
--- a/Marlin/src/module/probe.h
+++ b/Marlin/src/module/probe.h
@@ -45,6 +45,14 @@
#define PROBE_TRIGGERED() (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING)
#endif
+#ifdef Z_AFTER_HOMING
+ #define Z_POST_CLEARANCE Z_AFTER_HOMING
+#elif defined(Z_HOMING_HEIGHT)
+ #define Z_POST_CLEARANCE Z_HOMING_HEIGHT
+#else
+ #define Z_POST_CLEARANCE 10
+#endif
+
#if ENABLED(PREHEAT_BEFORE_LEVELING)
#ifndef LEVELING_NOZZLE_TEMP
#define LEVELING_NOZZLE_TEMP 0