diff --git a/doc/topics/blocking-vs-non-blocking.md b/doc/topics/blocking-vs-non-blocking.md
new file mode 100644
index 00000000000000..788887ae3b4a11
--- /dev/null
+++ b/doc/topics/blocking-vs-non-blocking.md
@@ -0,0 +1,143 @@
+# Overview of Blocking vs Non-Blocking
+
+This overview covers the difference between **blocking** and **non-blocking**
+calls in Node.js. This overview will refer to the event loop and libuv but no
+prior knowledge of those topics is required. Readers are assumed to have a
+basic understanding of the JavaScript language and Node.js callback pattern.
+
+> "I/O" refers primarily to interaction with the system's disk and
+network supported by [libuv](http://libuv.org/).
+
+
+## Blocking
+
+**Blocking** is when the execution of additional JavaScript in the Node.js
+process must wait until a non-JavaScript operation completes. This happens
+because the event loop is unable to continue running JavaScript while a
+**blocking** operation is occurring.
+
+In Node.js, JavaScript that exhibits poor performance due to being CPU intensive
+rather than waiting on a non-JavaScript operation, such as I/O, isn't typically
+referred to as **blocking**. Synchronous methods in the Node.js standard library
+that use libuv are the most commonly used **blocking** operations. Native
+modules may also have **blocking** methods.
+
+All of the I/O methods in the Node.js standard library provide asynchronous
+versions, which are **non-blocking**, and accept callback functions. Some
+methods also have **blocking** counterparts, which have names that end with
+`Sync`.
+
+
+## Comparing Code
+
+**Blocking** methods execute **synchronously** and **non-blocking** methods
+execute **asynchronously**.
+
+Using the File System module as an example, this is a **synchronous** file read:
+
+```js
+const fs = require('fs');
+const data = fs.readFileSync('/file.md'); // blocks here until file is read
+```
+
+And here is an equivalent **asynchronous** example:
+
+```js
+const fs = require('fs');
+fs.readFile('/file.md', (err, data) => {
+  if (err) throw err;
+});
+```
+
+The first example appears simpler than the second but has the disadvantage of
+the second line **blocking** the execution of any additional JavaScript until
+the entire file is read. Note that in the synchronous version if an error is
+thrown it will need to be caught or the process will crash. In the asynchronous
+version, it is up to the author to decide whether an error should throw as
+shown.
+
+Let's expand our example a little bit:
+
+```js
+const fs = require('fs');
+const data = fs.readFileSync('/file.md'); // blocks here until file is read
+console.log(data);
+// moreWork(); will run after console.log
+```
+
+And here is a similar, but not equivalent asynchronous example:
+
+```js
+const fs = require('fs');
+fs.readFile('/file.md', (err, data) => {
+  if (err) throw err;
+  console.log(data);
+});
+// moreWork(); will run before console.log
+```
+
+In the first example above, `console.log` will be called before `moreWork()`. In
+the second example `fs.readFile()` is **non-blocking** so JavaScript execution
+can continue and `moreWork()` will be called first. The ability to run
+`moreWork()` without waiting for the file read to complete is a key design
+choice that allows for higher throughput.
+
+
+## Concurrency and Throughput
+
+JavaScript execution in Node.js is single threaded, so concurrency refers to the
+event loop's capacity to execute JavaScript callback functions after completing
+other work. Any code that is expected to run in a concurrent manner must allow
+the event loop to continue running as non-JavaScript operations, like I/O, are
+occurring.
+
+As an example, let's consider a case where each request to a web server takes
+50ms to complete and 45ms of that 50ms is database I/O that can be done
+asychronously. Choosing **non-blocking** asynchronous operations frees up that
+45ms per request to handle other requests. This is a significant difference in
+capacity just by choosing to use **non-blocking** methods instead of
+**blocking** methods.
+
+The event loop is different than models in many other languages where additional
+threads may be created to handle concurrent work.
+
+
+## Dangers of Mixing Blocking and Non-Blocking Code
+
+There are some patterns that should be avoided when dealing with I/O. Let's look
+at an example:
+
+```js
+const fs = require('fs');
+fs.readFile('/file.md', (err, data) => {
+  if (err) throw err;
+  console.log(data);
+});
+fs.unlinkSync('/file.md');
+```
+
+In the above example, `fs.unlinkSync()` is likely to be run before
+`fs.readFile()`, which would delete `file.md` before it is actually read. A
+better way to write this that is completely **non-blocking** and guaranteed to
+execute in the correct order is:
+
+
+```js
+const fs = require('fs');
+fs.readFile('/file.md', (err, data) => {
+  if (err) throw err;
+  console.log(data);
+  fs.unlink('/file.md', (err) => {
+    if (err) throw err;
+  });
+});
+```
+
+The above places a **non-blocking** call to `fs.unlink()` within the callback of
+`fs.readFile()` which guarantees the correct order of operations.
+
+
+## Additional Resources
+
+- [libuv](http://libuv.org/)
+- [About Node.js](https://nodejs.org/en/about/)