From a1bd8f612ab342a2669f86925aa590a146d35302 Mon Sep 17 00:00:00 2001 From: nand2mario Date: Sat, 19 Aug 2023 23:49:54 +0800 Subject: [PATCH] readme --- README.md | 5 +++-- src/nes_tang20k.v | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 73656e2..673facf 100644 --- a/README.md +++ b/README.md @@ -20,10 +20,10 @@ Main features, The best way to experience NESTang is with the Tang Nano 20K (Retro Game Kit version), which cost $38 last time I checked. The board features FPGA-friendly SDRAM memory. And the kit includes the necessary controller adapters and a pair of controllers. Here's what you need to run NESTang: * The Tang Nano 20K board. -* Sipeed ps2 controller adapters connected to the board's pin 15-20 on both sides. +* Sipeed ps2 controller adapters connected to the board's pin 15-20 on both sides. The latest 0.6 release also supports [USB gamepads](doc/usb_gamepad.md). * Playstation controllers (wired or wireless) connected to the adapters. * HDMI cable to connect the board to a monitor. -* NESTang 0.5 program downloaded from [github](https://github.com/nand2mario/nestang/releases) and transferred to the board using either [openFPGALoader](https://github.com/trabucayre/openFPGALoader) or Gowin programmer. +* Latest NESTang program downloaded from [github](https://github.com/nand2mario/nestang/releases) and transferred to the board using either [openFPGALoader](https://github.com/trabucayre/openFPGALoader) or Gowin programmer. * A MicroSD card to hold ROMs. An 8GB cards should suffice. The `tools/nes2img.py` python program can be used to convert .nes ROM files to an .img file. Ensure that you have Python version 3.7 or higher, and then install the Pillow package using `pip3 install pillow`. You can then use an SD imaging tool such as [Balena Etcher](https://www.balena.io/etcher) to burn the newly created image onto the MicroSD card. * Insert the MicroSD card and power up the board to start playing your favorite games! @@ -65,6 +65,7 @@ Here are what I may work on when I get time. No promise though. Suggestions and * [fpganes](https://github.com/strigeus/fpganes) by Ludvig Strigeus. * [hdl-util/hdmi](https://github.com/hdl-util/hdmi) by Sameer Puri. +* [NES for Tang Nano 9K](https://github.com/hi631/tang-nano-9K) by hi631 nand2mario (`nand2mario at outlook.com`) diff --git a/src/nes_tang20k.v b/src/nes_tang20k.v index 769b29c..6aa7028 100644 --- a/src/nes_tang20k.v +++ b/src/nes_tang20k.v @@ -545,7 +545,8 @@ end `endif -assign led = ~{~UART_RXD, usb_conerr, loader_done}; +assign led = ~{~UART_RXD, loader_done}; +//assign led = ~{~UART_RXD, usb_conerr, loader_done}; // assign led = ~usb_btn; endmodule \ No newline at end of file