No Midi Device shown

[landman]

Hi,

i m using an Arturia Midi Controller but i cant choose it. Its now shown in Dropdown.
USB Keyboards are not possible with Giada?

[gvnnz]

Hi @landman , sorry for the delay. USB keyboards are definitely supported by Giada. Can you please paste here the debug output when you start it up? How to enable logging: Config -> Misc -> Debug Messages -> To standard output (or "to file" if you are not running Giada from the command line). Thanks!

[astaticvoid]

Not OP, but seeing same problem on Debian 11

dkh@x220:~/Downloads$ ./Giada-v0.22.0-x86_64.AppImage 
[init] Giada 0.22.0
[init] Build date: Jun 11 2022
[init] Release build
[init] Dependencies:
[init]   FLTK - 1.3.8
[init]   RtAudio - 6.0.0beta1
[init]   RtMidi - 5.0.0
[init]   Libsamplerate
[init]   Libsndfile - libsndfile-1.0.31
[init]   JSON for modern C++ - 3.9.1
[init]   JUCE - 6.1.5
[KA] Compiled RtAudio APIs: 3
  JACK
  PulseAudio
  ALSA
[KM] Compiled RtMidi APIs: 1
  Dummy
[MidiMapper::init] total midimaps found: 0
[Engine::init] MIDI map read failed!
[KA] using system 0x1
[KA] Opening device out=0, in=-1, samplerate=44100
[KA] 3 device(s) found
  0) system
      ins=2 outs=4 duplex=2
      isDefaultOut=1 isDefaultIn=1
      sampleRates:
        44100 
  1) PulseAudio JACK Sink
      ins=2 outs=0 duplex=0
      isDefaultOut=0 isDefaultIn=0
      sampleRates:
        44100 
  2) PulseAudio JACK Source
      ins=0 outs=2 duplex=0
      isDefaultOut=0 isDefaultIn=0
      sampleRates:
        44100 
[KA] JACK in use, samplerate=44100
[mixer::reset] buffers ready - maxFramesInLoop=529200, framesInBuffer=1024
[mixer::enable] enabled
[KA] Start stream - latency = 2048
[LangMapper::init] total langmaps found: 0
[ui] All windows closed
[Engine::shutdown] KernelAudio closed
[mixer::disable] disabled
[Engine::shutdown] Mixer closed
[Engine::shutdown] configuration saved
[init] Giada 0.22.0 closed

Running version 0.16.2 from Debian repo shows midi backends in config screen:

dkh@x220:~/Downloads$ giada
[init] Giada 0.16.2
[init] Build date: 2020-10-27
[init] Dependencies:
[init]   FLTK - 1.3.5
[init]   RtAudio - 5.1.0
[init]   RtMidi - 4.0.0
[init]   Libsamplerate
[init]   Libsndfile - libsndfile-1.0.31
[init]   JSON for modern C++ - 3.9.1
[init]   JUCE - 5.4.7
[midiMapConf::init] scanning midimaps directory '/home/dkh/.giada/midimaps/'...
[midiMapConf::init] unable to scan midimaps directory!
[midiMapConf::read] midimap not specified, nothing to do
[init] MIDI map read failed!
[KA] using system 0x1
[KA] Opening devices 0 (out), -1 (in), f=44100...
[KA] 3 device(s) found
  0) system
  1) PulseAudio JACK Sink
  2) PulseAudio JACK Source
[KA] JACK in use, freq = 44100
[mixer::init] buffers ready - framesInSeq=88200, framesInBuffer=1024
[mixer::enable] enabled
[KA] latency = 2048
[KM] using system 0x0
[KM] 4 output MIDI ports found
  0) Midi Through:Midi Through Port-0 14:0
  1) Midi Through:Midi Through Port-1 14:1
  2) Midi Through:Midi Through Port-2 14:2
  3) Midi Through:Midi Through Port-3 14:3
[KM] 4 input MIDI ports found
  0) Midi Through:Midi Through Port-0 14:0
  1) Midi Through:Midi Through Port-1 14:1
  2) Midi Through:Midi Through Port-2 14:2
  3) Midi Through:Midi Through Port-3 14:3
[init] All subwindows and UI thread closed
[init] configuration saved
[init] KernelAudio closed
[mixer::disable] disabled
[init] Mixer closed
[init] PluginHost cleaned up
[init] Giada 0.16.2 closed

[gvnnz]

Thanks @astaticvoid , I've opened a new issue here: #598.

[gvnnz]

AppImage issue fixed in b0decab.