Skip to content

Build Windows Dependencies

Jump to bottom
JoergAtGithub edited this page Dec 27, 2023 · 1 revision

This page is outdated. Today we use VCPKG to build our Windows and macOS dependencies: https://github.com/mixxxdj/vcpkg

Building Mixxx's dependencies on Windows

We assume you've installed and configured Visual Studio Express and the Microsoft Platform/Windows SDK as described in steps 1 & 2 on this page, and if you want to build x64 versions with the free Visual Studio Express 2008, that you've done this hack (or this one if you're using VS 2005.) VS 2010 Express supports x64 projects out of the box (but it uses alot more resources than earlier versions due at least in part to its (needless) dependence on .NET 4.)

To see the supported version of each library for a given Mixxx version, see dependencies.

Qt

Qt now provides pre-built binaries for 32-bit Windows for the MSVC 2008 compiler (and the minGW one.) But if you want to build it from source yourself for whatever reason (like for x64,) here are the steps:

Prepare build environment

  - First, check [[https://github.com/sandym/qt-patches/tree/master/windows|This GitHub repo]] for patches and instructions that may apply to the version of Qt you're using.
  - Tweak the Qt configuration:
    - **Full-text search:** Edit ''C:\qt-everywhere-opensource-src-4.6.1\src\plugins\sqldrivers\sqlite\sqlite.pro''
      - Add this, after the first DEFINES += :<code>DEFINES += SQLITE_ENABLE_FTS3 SQLITE_ENABLE_FTS3_PARENTHESIS</code>
    - **Speed** (optional): Edit ''C:\qt-everywhere-opensource-src-4.6.1\mkspecs\win32-msvc2008\qmake.conf'':
      - If you have more than one processor/core, add ''/MP'' to ''QMAKE_CFLAGS''.
      - Add ''-Ox'' to ''QMAKE_CFLAGS_RELEASE'' for "full optimization" (Though ''-O2'' is preferred.)
      - Add ''/arch:SSE'' to ''QMAKE_CFLAGS_RELEASE'' for SSE support (use SSE2 if your CPU supports it)
      - Add ''/LTCG'' to ''QMAKE_LIB'' to improve linker performance if using ''-ltcg'' in the configure command below.
      - Change ''QMAKE_LFLAGS_LTCG'' to ''/LTCG:STATUS'' so it tells you how long it will take to generate each executable (Some of them take a loooong time (WebKit and QtScript) so it's nice to know.)
      - You can do the same in ''C:\qt-everywhere-opensource-src-4.6.1\qmake\makefile.win32'' but **don't** add ''-GL'' to CFLAGS on x86 or qmake won't work. Otherwise, you can add any options suitable for your particular system since qmake is just going to run there. (e.g. /arch:SSE2)
    - **Static libraries** (no msvcrtXX.dll dependence, optional): Edit ''C:\qt-everywhere-opensource-src-4.6.1\mkspecs\win32-msvc2008\qmake.conf'':
      - Change the ''QMAKE_CFLAGS_RELEASE'' from ''-MD'' to ''-MT''
      - Add ''/NODEFAULTLIB:"MSVCRT"'' to ''QMAKE_LFLAGS_RELEASE''.

Linking with ASMLIB

If you want to link Qt against Agner Fog's optimized ASMLIB, do the following:

  1. Download the latest copy of the library from here
  2. Unzip it to a directory of your choice, say C:\asmlib
  3. Edit qt-everywhere-opensource-src-4.6.1\mkspecs\win32-msvc2005\qmake.conf:
    1. Add -Oi- to QMAKE_CFLAGS
    2. Add /LIBPATH:"C:\\asmlib" to QMAKE_LFLAGS
    3. Add alibcof32o.lib (or alibcof64o.lib for 64-bit) to QMAKE_LFLAGS (this ensures it's linked into every module)

x64 prep (optional)

  1. Tweak the Qt configuration:
    1. Edit qt-everywhere-opensource-src-4.6.1\mkspecs\win32-msvc2008\qmake.conf:
      1. Add to QMAKE_CFLAGS: /favor:AMD64 (or use blend or EM64T if appropriate), also add /MP if you have more than one processor/core
      2. Add to QMAKE_LFLAGS: /MACHINE:X64 (or IA64)
      3. (optional) Add -Ox to QMAKE_CFLAGS_RELEASE for extra optimizations
    2. Edit qt-everywhere-opensource-src-4.6.1\qmake\makefile.win32:
      1. add to CFLAGS: /favor:AMD64 (or use blend or EM64T if appropriate,) and -Ox for more optimizations if you want
      2. add to LFLAGS: /MACHINE:X64 (or IA64)

Build

If building with VS2015, read this thread for patches to the Qt code base to get it to build.

  • 32-bit:
    - Start the Visual Studio command prompt (Start->Microsoft C++ Visual Studio->Visual Studio Tools->Visual Studio Command Prompt)
    - Type ''setenv /xp /x86 /release'' and hit Enter. (The /x86 is for those on x64 OSs to make sure it targets 32-bit platforms.)
* 64-bit: 
    - Start the Visual Studio command prompt (Start->Microsoft Windows SDK->CMD Shell)
    - Type ''setenv /xp /x64 /release'' (or ''/ia64'') and hit Enter.
  - Type ''cd C:\qt-everywhere-opensource-src-4.6.1'' (or wherever you unpacked Qt) and hit Enter.
  - Type ''SET QT_BUILD_PARTS=LIBS'' (and add whatever other parts you want) and hit Enter.
  - Type ''configure -opensource -platform win32-msvc2005 -qt-sql-sqlite'' and press Enter.
    - For more optimized code, also add ''-ltcg''.
    - To configure faster, also add ''-fast -no-vcproj -no-dsp''.
  - When it finishes (about 5-10 minutes,) just type ''nmake'' and press Enter and you should be good (takes 1~3 hours.)
    * If you get ''<sdkdir>\winnt.h(1831) : error C2733: second C linkage of overloaded function '_interlockedbittestandset' not allowed'' then edit <sdkdir>\VC\INCLUDE\intrin.h and change the definition of ''_interlockedbittestandset'' and ''_interlockedbittestandreset'' to ''long **volatile** *'' like so:<code>__MACHINEI(unsigned char _interlockedbittestandset(long volatile *a, long b))

__MACHINEI(unsigned char _interlockedbittestandreset(long volatile *a, long b))</code> Do nmake again and it should finish fine.

    * If on x64 and you get the similar ''<sdkdir>\winnt.h(1831) : error C2733: second C linkage of overloaded function '_interlockedbittestandset64' not allowed'' then edit <sdkdir>\VC\INCLUDE\intrin.h and change the definition of ''_interlockedbittestandset64'' and ''_interlockedbittestandreset64'' to to ''_ _int64 **volatile** *'' like so:<code>__MACHINEX64(unsigned char _interlockedbittestandset64(__int64 volatile *a, __int64 b))

MACHINEX64(unsigned char _interlockedbittestandreset64(int64 volatile *a, __int64 b))</code> Do nmake again and it should finish fine.

libsndfile

libsndfile fortunately provides binaries for Win32 and Win64, so all you need to do is:

  1. Download & run the appropriate installer
  2. Copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc:libsndfile\libsndfile-1.dll libsndfile\libsndfile-1.lib (rename to sndfile.lib)
  3. Copy the .h files from libsndfile\include to mixxx-win[32|64]lib-msvc

Troubleshooting

  • If you get a crapload of sndfile.h errors when Mixxx's enginesidechain.cpp is compiling, edit mixxx-win[32|64]lib-msvc\sndfile.h and change the line typedef __int64_t sf_count_t ; to: typedef __int64 sf_count_t ;

PortAudio

PortAudio provides MSVC project files, which makes things nice. Just have the DirectX SDK installed and open and build. (Step-by-step is given below.)

VS 2005 x64 hacks

Follow these instructions for the following files:

portaudio\build\msvc\portaudio.sln
portaudio\build\msvc\portaudio.vcproj

Build

  1. Download and unpack the latest ASIO SDK (requires login and license agreement)
  2. Follow the instructions in the files portaudio\build\msvc\readme.txt and portaudio\src\hostapi\asio\ASIO-README.txt to prepare to build PA with ASIO support.
  3. Download and install the latest DirectX SDK: http://msdn.microsoft.com/en-us/directx/aa937788.aspx
  4. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  5. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  6. Run dx_setenv.cmd, the DirectX SDK environment variable setup script here to add the DirectX paths. (e.g. C:\Program Files\Microsoft DirectX SDK (March 2009)\Utilities\Bin\dx_setenv.cmd)
  7. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  8. Open the portaudio\build\msvc\portaudio.vcproj file via File->Open->Project/Solution. After doing the upgrade, you'll only see "Win32" targets if you're using VS Express. (If you've made the changes to the project files given above, building these will actually give you x64 versions. We had to do it this way otherwise VS Express would see the x64 targets in the file and refuse to make them available to you, since that's a premium feature of non-free versions of VS.)
  9. Choose the Release configuration and the Win32 platform
  10. Right-click the portaudio project and click Properties
  11. Navigate to Configuration Properties->C/C++->Preprocessor, then under Preprocessor Definitions, change PA_USE_ASIO=1 and PA_USE_DS=1
  12. Press F7 to build
  13. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: portaudio\include\portaudio.h portaudio\build\msvc\Win32\Release\portaudio_x86.dll (or portaudio_x64.dll) portaudio\build\msvc\Win32\Release\portaudio_x86.lib (or portaudio_x64.lib. Rename either to portaudio.lib)

PortMidi

PortMidi provides MSVC project files, which makes things nice. Just open and build. (Step-by-step is given below.)

Build

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the portmidi\ALL_BUILD.vcproj file via File->Open->Project/Solution.
  5. Choose the Release configuration and the Win32 platform
  6. If building for x64
    1. Edit the portmidi-dynamic and portmidi-static projects and change Linker->Advanced->Target Machine to /MACHINE:X64
  7. Right-click portmidi-dynamic and click Build
  8. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: portmidi\pm_common\portmidi.h portmidi\Release\portmidi.lib portmidi\Release\portmidi.dll

PortTime

PortMidi provides MSVC project files, which makes things nice. Just open and build. (Step-by-step is given below.)

Build

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the portmidi\porttime\porttime.vcproj file via File->Open->Project/Solution. (If on VS2005, use the porttime-VC8.vcproj file.)
  5. Choose the Release configuration and the Win32 platform
  6. Press F7 to build
  • If you get portmidi\porttime\porttime.h(20) : fatal error C1083: Cannot open include file: 'stdint.h': No such file or directory then edit the project properties and add mixxx-win32lib-msvc (or 64) to Additional Include Directories
  1. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: portmidi\porttime\porttime.h portmidi\porttime\Release\porttime.lib

libogg

Xiph.org provides MSVC project files, which makes things nice. Just open and build. (Step-by-step is given below.)

VS 2005 x64 hacks

Follow these instructions for the following files:

libogg-1.1.4\win32\VS2008\libogg_dynamic.sln
libogg-1.1.4\win32\VS2008\libogg_dynamic.vcproj

Build

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the libogg-1.1.4\win32\VS2008\libogg_dynamic.vcproj file via File->Open->Project/Solution. You'll only see "Win32" targets if you're using VS Express. (If you've made the changes to the project files given above, building these will actually give you x64 versions. We had to do it this way otherwise VS Express would see the x64 targets in the file and refuse to make them available to you, since that's a premium feature of non-free versions of VS.)
  5. Choose the Release configuration and the Win32 platform
  6. Press F7 to build
  7. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: libogg-1.1.4\win32\VS2008\Win32\Release_SSE2\libogg.dll libogg-1.1.4\win32\VS2008\Win32\Release_SSE2\libogg.lib (rename to ogg.lib)
  8. Copy the .h files from libogg-1.1.4\include\ogg into mixxx-win[32|64]lib-msvc\ogg

libvorbis

Xiph.org provides MSVC project files, which makes things nice. Just open and build. (Step-by-step is given below.) Libvorbis depends on libogg, so build that first.

VS 2005 x64 hacks

Follow these instructions for the following files:

libvorbis-1.2.3\win32\VS2008\vorbis_dynamic.sln
libvorbis-1.2.3\win32\VS2008\libvorbis\libvorbis_dynamic.vcproj
libvorbis-1.2.3\win32\VS2008\libvorbisfile\libvorbisfile_dynamic.vcproj

Build

  1. Edit libvorbis-1.2.3\win32\VS2008\libogg.vsprops and make sure the LIBOGG_VERSION at the bottom matches the version of libogg you built above.
  2. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  3. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  4. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  5. Open the libvorbis-1.2.3\win32\VS2008\vorbis_dynamic.sln file via File->Open->Project/Solution. You'll only see "Win32" targets if you're using VS Express. (If you've made the changes to the project files given above, building these will actually give you x64 versions. We had to do it this way otherwise VS Express would see the x64 targets in the file and refuse to make them available to you, since that's a premium feature of non-free versions of VS.)
  6. Choose the Release_SSE2 configuration and the Win32 platform
  7. Right-click libvorbis and click Build
  8. Right-click libvorbisfile and click Build
  9. When finished, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: libvorbis-1.2.3\win32\VS2008\Win32\Release_SSE2\libvorbis.dll libvorbis-1.2.3\win32\VS2008\Win32\Release_SSE2\libvorbis.lib libvorbis-1.2.3\win32\VS2008\Win32\Release_SSE2\libvorbisfile.dll libvorbis-1.2.3\win32\VS2008\Win32\Release_SSE2\libvorbisfile.lib
  10. Copy the libvorbis-1.2.3\include\vorbis folder from into mixxx-win[32|64]lib-msvc. You can delete the Makefiles inside, as we just need the .h files.

Troubleshooting

  • If you get the error vorbis.def : error LNK2001: unresolved external symbol _analysis_output_always comment the line _analysis_output_always in libvorbis-1.2.3\win32\vorbis.def (line 51 in my copy.) Press F7 again and it should build fine.

libmad

MAD provides MSVC project files, which makes things nice. Just open and build. (Step-by-step is given below.)

Build

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the libmad-0.15.1b\msvc++\libmad.dsp file via File->Open->Project/Solution.
  5. Answer 'Yes' to convert & open the project
  6. Choose the Release configuration and the Win32 platform
  7. If building for x64
    1. Right-click libmad and click Properties
    2. Go to Configuration Properties->C/C++->Preprocessor and under Preprocessor Definitions, change FPM_INTEL to FPM_64BIT
  8. Press F7 to build. (You can cancel the .sln save dialog if you want and it will still build.)
  9. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: libmad-0.15.1b\mad.h libmad-0.15.1b\msvc++\Release\libmad.lib

libid3tag

MAD provides MSVC project files, which makes things nice. Just open and build. (Step-by-step is given below.)

LibID3Tag needs ZLib headers, so we have to get them too (detailed below.)

Build

  1. Download & unpack the latest zlib source
  2. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  3. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  4. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  5. Open the libid3tag-0.15.1b\msvc++\libid3tag.dsp file via File->Open->Project/Solution.
  6. Answer 'Yes' to convert & open the project
  7. Choose the Release configuration and the Win32 platform
  8. Add the ZLib paths to the compiler:
    1. Right-click libid3tag and click Properties
    2. Go to Configuration Properties->C/C++->General and under Additional Include Directories, add the path to the directory into which you unpacked the ZLib source, e.g. c:\temp\zlib123
    3. Click OK.
  9. Press F7 to build. (You can cancel the .sln save dialog if you want and it will still build.)
  10. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: libid3tag-0.15.1b\id3tag.h libid3tag-0.15.1b\msvc++\Release\libid3tag.lib (rename to id3tag.lib)

Troubleshooting

  • If you get the error ..\file.c(33) : fatal error C1083: Cannot open include file: 'unistd.h': No such file or directory then edit the file libid3tag-0.15.1b-patched\file.c and change the line # include "config.h"to# include "msvc++/config.h" Save that and press F7 to rebuild.

libfaad2

FAAD2 provides MSVC project files, which makes things nice. Just open and build. (Step-by-step is given below.)

x64 prep

  1. Edit faad2-2.7\libfaad\common.h:
    1. Delete line 315, #if defined(_WIN32) && !defined(__MINGW32__) and replace it with <code> #if defined(_WIN64) && !defined(MINGW64)
  // No LRINTF until someone writes an .asm file
#elif defined(_WIN32) && !defined(__MINGW32__)</code>
  - Save the file.

Build

  1. Edit the faad2-2.7\libfaad\libfaad2.def file and add the following lines to the bottom: NeAACDecPostSeekReset @10 NeAACDecDecode2 @11
  2. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  3. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  4. Run the Visual Studio GUI from this command line, specifying the /useenv switch to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  5. Open the faad2-2.7\libfaad\libfaad2_dll.vcproj file via File->Open->Project/Solution.
  6. Answer 'Yes' to convert & open the project
  7. Choose the Release configuration and the Win32 platform
  8. Add the FAAD path to the compiler:
    1. Right-click the libfaad2_dll project and go to Properties
    2. Go to Configuration Properites->C/C++->General
    3. Choose "Additional Include Directories" on the right and add FAAD's 'include' directory, e.g. c:\temp\faad2-2.7\include
    4. Click OK.
  9. Press F7 to build. (You can cancel the .sln save dialog if you want and it will still build.)
  • If you get faad2-2.7\libfaad\common.h(42) : fatal error C1083: Cannot open include file: 'neaacdec.h': No such file or directory then under project Configuration properties->C/C++->General:
    * Add to Additional Include Directories: ''..\include'' 
- When it finishes, copy the following files into ''mixxx-win32lib-msvc'' or ''mixxx-win64lib-msvc'': <code>faad2-2.7\libfaad\include\faad.h

faad2-2.7\libfaad\include\neaacdec.h faad2-2.7\libfaad\include\libfaad\ReleaseDLL\libfaad2.dll faad2-2.7\libfaad\include\libfaad\ReleaseDLL\libfaad2.lib (rename to libfaad.lib) </code>

libmp4v2

MP4V2 provides MSVC solution files, which makes things nice. Just open and build. (Step-by-step is given below.)

Build

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the mp4v2-1.9.1\vstudio9.0\libmp4v2\libmp4v2.vcproj file via File->Open->Project/Solution.
  5. Choose the Release configuration and the Win32 platform
  6. If building for x64
    1. Go to Build->Configuration manager
    2. Drop down Active Solution Platform and choose New...
    3. Type x64 and choose copy settings from Win32. Click OK.
    4. Choose Release on the left, x64 on the right and click Close.
  7. Tune the project settings to your liking
    1. Right-click the libmp4v2 project and click Properties.
    2. Under Configuration Properties, Linker, Debugging, set Generate Debug Info to No.
  8. Right click libmp4v2 and click Build.
  9. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: mp4v2-1.9.1\vstudio9.0\Release\libmp4v2.dll mp4v2-1.9.1\vstudio9.0\Release\libmp4v2.lib mp4v2-1.9.1\include\mp4v2 (the whole directory)

libFLAC

libFLAC provides MSVC solution files, which makes things nice.

Dependencies

libFLAC requires The Netwide Assembler to build.

  1. Download the ZIP file from here and extract it.
  2. Rename/copy the file nasm.exe to nasmw.exe since that's what the FLAC sources look for

Preparation

  1. Build libOGG (see above)
  2. Download the FLAC source and extract it.

Note: For x64 as of FLAC v1.2.1, we have been unable to get it to build. It gives the following errors:bitreader_asm.obj : error LNK2001: unresolved external symbol _FLAC__crc16_table bitreader_asm.obj : error LNK2001: unresolved external symbol _bitreader_read_from_client_ The only solutions currently found are to build the static version, or to download the OpenCodecs source and use the opencodecs\src\lib\codecs\flac\libs\libflac\src\libFLAC\libFLAC_dynamic.vcproj as-is and skip the rest of this section since that source seems to include the below patches.

  1. Copy libogg-1.1.4\win32\VS2008\Win32\Release_SSE\libogg_static.lib to flac-1.2.1\obj\release\lib and rename it to ogg_static.lib
  2. For x64:

    1. For each of the following files, search & replace all instances of -f win32 with -f win64: flac-1.2.1\src\libFLAC\libflac_dynamic.dsp flac-1.2.1\src\libFLAC\libflac_dynamic.vcproj flac-1.2.1\src\libFLAC\libflac_static.dsp flac-1.2.1\src\libFLAC\libflac_static.vcproj

    2. Apply the following patch to flac-1.2.1\src\libFLAC\bitreader.c:`--- flac-1.2.1-original\src\libFLAC\bitreader.c Tue Sep 11 06:48:56 2007 +++ flac-1.2.1\src\libFLAC\bitreader.c Tue May 20 12:30:08 2008 @@ -149,15 +149,37 @@ FLAC__CPUInfo cpu_info; };

      -#ifdef MSC_VER -/* OPT: an MSVC built-in would be better / + +/ local_swap32() / +/ Swaps the byte order of a 32 bits integer, converting between big-endian and little-endian */ +#if defined(_MSC_VER) + +#include <stdlib.h> // Contains _byteswap_ulong() for MSVC according to MSDN static inline FLAC__uint32 local_swap32(FLAC__uint32 x) {

      • /* This is an intrinsic and will expanded to minimal asm by the compiler */
      • return _byteswap_ulong(x); +}

      +#else /* defined(_MSC_VER) */ + +static inline FLAC__uint32 local_swap32(FLAC__uint32 x) +{

      • /* Manual version, a bit slower but works everywhere */ x = ((x<<8)&0xFF00FF00) | ((x>>8)&0x00FF00FF); return (x>>16) | (x<<16); }

      +#endif /* defined(MSC_VER) / + + +/ local_swap32_block() / +/ Swaps the byte order of an array of 32 bits integers */ +#if defined(_MSC_VER) && !defined(FLAC__NO_ASM) || !defined(M_X64) + static void local_swap32_block(FLAC__uint32 *start, FLAC__uint32 len) {

      • /* MSVC specific 32 bit asm version */ __asm { mov edx, start mov ecx, len @@ -173,7 +195,22 @@ done1: } } -#endif

      +#else /* defined(_MSC_VER) && !defined(FLAC__NO_ASM) || !defined(M_X64) */ + +static void local_swap32_block(FLAC__uint32 *start, FLAC__uint32 len) +{

      • /* MSVC specific intrinsic version */
      • while(len > 0)
      • {
      • *start = local_swap32_(*start);
      • ++start;
      • --len;
      • } +}

      +#endif /* defined(_MSC_VER) && !defined(FLAC__NO_ASM) || !defined(_M_X64) */ +

          static FLaC__INLINE void crc16_update_word_(FLAC__BitReader *br,

      brword word) {

      `

  3. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  4. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  5. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  6. Add paths to the environment:
    1. Go to Tools->Options->Projects and Solutions->VC++ Directories
    2. Choose "Executable files" on the right and add the path to the NASM directory you extracted to above, e.g. C:\nasm-2.09.03
    3. Choose "Include files" on the right and add the path to the libOGG include directory, e.g. C:\libogg-1.1.4\include
  7. Open the flac-1.2.1\FLAC.sln file and agree to upgrade if asked
  8. Rename the libFLAC_dynamic project to just libFLAC
  9. Choose the Release configuration and the Win32 platform
  10. If building for x64, for both the libFLAC_dynamic and libFLAC_static projects:
    1. Right-click it and choose Properties...
    2. Go to Configuration Properties->C/C++->Preprocessor and enter FLAC__NO_ASM; at the front of the Preprocessor Definitions list
    3. For the dynamic one only, go to Configuration Properties->Linker->Advanced and choose /MACHINE:X64 for Target Machine
    4. For the dynamic one only, go to Configuration Properties->Linker->Debugging and ensure Generate Debug Info is set to No
  11. If you're going to use the static library, edit mixxx\src\soundsourceflac.h and add: #define FLAC__NO_DLL above the #include <FLAC/stream_decoder.h> line.

Build

  1. Right click libFLAC_dynamic and click Build.
  2. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: flac-1.2.1\obj\release\lib\libFLAC.lib flac-1.2.1\obj\release\lib\libFLAC.dll flac-1.2.1\include\FLAC (the whole directory)

libHSS1394

Stanton's HSS1394 provides MSVC solution files (that we've updated) which makes things nice.

Build

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the HSS1394\code\builds\win32\libHSS1394_dll_VC90.vcproj file via File->Open->Project/Solution.
  5. Choose the Release configuration and the Win32 platform
  6. If building for x64,
    1. Right-click the libHSS1394 project and click Properties.
    2. Under Configuration Properties->C/C++->Preprocessor, for Preprocessor Definitions, add ;_WIN64_
  7. Tune the project settings
    1. Right-click the libHSS1394 project and click Properties.
    2. Under Configuration Properties->Linker->General, set Output File to $(OutDir)\HSS1394.dll
    3. Under Configuration Properties->Linker->Advanced, set Import Library to $(OutDir)\HSS1394.lib
  8. Right click libHSS1394 and click Build.
  9. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: HSS1394\lib\HSS1394.lib HSS1394\lib\HSS1394.dll HSS1394\inc (the whole directory, and rename it to HSS1394)
  10. Edit the mixxx-win[32|64]lib-msvc\HSS1394\HSS1394Types.h source file and change line 65 to:<code> #ifdef WINDOWS</code>
  11. Save the file

libshout

Libshout is a library for live audio broadcasting over the Internet. It is developed by the icecast.org project.

Dependencies

libshout requires libogg, libvorbis, and PThreads.

You must have first built libogg and libvorbis (see above.)

Download/build PThreads

libshout requires POSIX threads for Windows. It's a piece of cake to build:

  1. Download the source tree (look for files named like pthreads-w32-2-8-0-release.tar.gz and pick the latest one.)
  2. Unpack the directory to the same folder you unpacked libshout's (so that the pthreads and libshout folders are at the same level)
  3. For x64,
    1. Edit the file pthread_cancel.c
    2. Change line 195 to ptw32_register_cancelation ((PAPCFUNC)ptw32_cancel_callback, threadH, 0);
  4. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  5. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  6. cd to the directory you unpacked it to
  7. Type nmake clean VC and hit Enter.
  8. When it finishes, type mt.exe -manifest pthreadVC2.dll.manifest -outputresource:pthreadVC2.dll;2 and hit Enter.
  9. Copy the following file into mixxx-win32lib-msvc or mixxx-win64lib-msvc: pthreads\pthreadVC2.dll

Preparation

  1. Download the Icecast server source
  2. Extract the file icecast-2.3.2\src\compat.h to libshout-2.3.1\include
  3. Rename/copy libshout-2.2.2\include\shout\shout.h.in to shout.h
  4. Copy libshout-2.2.2\include\shout\shout.h to mixxx-win[32|64]lib-msvc\shout
  5. Copy libshout-2.2.2\include\os.h to mixxx-win[32|64]lib-msvc\shout
  6. Edit mixxx-win[32|64]lib-msvc\shout\shout.h:
    1. Change #include <os.h> to #include "os.h"
    2. Change line 25 to #ifdef __WINDOWS__

For libshout v2.4.1 (on VS2015/VC19)

  1. Edit the file libshout-2.4.1\src\proto_http.c. Find the line #include <strings.h> and wrap it in an #ifndef _WIN32: #ifndef _WIN32 #include <strings.h> #endif

  2. Edit the file libshout-2.4.1\src\proto_roaraudio.c. Find the line #include <arpa/inet.h> and replace it with: #ifdef _WIN32 #include <Winsock2.h> #else #include <arpa/inet.h> #endif

  3. Edit the file libshout-2.4.1\include\os.h. Add the following lines inside the #ifdef _MSC_VER block:` #define strncasecmp _strnicmp #define strcasecmp _stricmp

        typedef unsigned __int8 uint8_t;
    typedef unsigned __int16 uint16_t;

    `

  4. Edit the file libshout-2.4.1\src\httpp\httpp.h. Find the line #define __HTTPP_H and add underneath it: #ifdef _MSC_VER #define strcasecmp _stricmp #endif

For libshout v2.3.1

  1. Edit the file libshout-2.3.1\src\timing\timing.h and add near the top: #if defined(_WIN32) #define HAVE_FTIME 1 #include <sys/timeb.h> #endif
  2. Edit libshout-2.3.1\src\timing\timing.c and replace the struct definition and ftime call at line 57 with the following:#if defined(_WIN32) struct _timeb t; _ftime(&t); #else struct timeb t; ftime(&t); #endif
  3. Edit libshout-2.3.1\include\os.h and add the following line under the int32 one:typedef unsigned __int16 uint16_t;

For libshout v2.2.2

Thanks to Prokoba's blog for guidance!

  1. Edit the file libshout-2.2.2\src\timing\timing.h:
    1. Remove the #ifdef _mangle block
    2. Before the first #ifdef _WIN32 line, add #undef int64_t #undef uint64_t
  2. Edit the file libshout-2.2.2\src\shout.c:
    1. Search and replace all instances of the word inline with __inline
    2. Change line 1016 to ret = sock_write_bytes (self->socket, (char*)data + pos, len - pos);
    3. Add the following at the top: #ifndef __MINGW32__ #define va_copy(ap1, ap2) memcpy(&ap1, &ap2, sizeof(va_list)) #endif
  3. Edit libshout-2.2.2\include\shout\shout.h and place __declspec(dllexport) in front of every function definition

Build

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the libshout-2.2.2\win32\libshout.dsp file via File->Open->Project/Solution and upgrade if needed.
  5. Choose the Release configuration and the Win32 platform
  6. If building for x64
    1. Go to Build->Configuration manager
    2. Drop down Active Solution Platform and choose New...
    3. Type x64 and choose copy settings from Win32. Click OK.
    4. Choose Release on the left, x64 on the right and click Close.
  7. Change the project to a DLL:
    1. Go to Configuration Properties->General, and change Configuration Type to "Dynamic Library (.dll)"
    2. Change Whole Program Optimization to "Use Link Time Code Generation"
    3. Click OK
  8. Fix missing source files:
    1. Find libshout-2.2.2\src\vorbis.c and drag it to the Source Files folder in the project
    2. For v2.3.1, drag the following additional files to the Source Files folder in the project:libshout-2.3.1\src\webm.c libshout-2.3.1\src\opus.c
  9. Add the paths to the dependencies:
    1. Right-click libshout and choose Properties.
    2. If you're using a static build of pthreads, under Configuration Properties->C/C++->Preprocessor, add PTW32_STATIC_LIB to Preprocessor Definitions
    3. Under Configuration Properties->C/C++->General, add the following paths under Additional Include Directories: ..\..\pthreads-w32-2-8-0-release,..\..\libvorbis-1.2.3\include,..\..\libogg-1.1.4\include
      1. If you didn't copy compat.h, add the path to the Icecast server source as well, ..\..\icecast-2.3.2\src
    4. Go to Configuration Properties->Linker
      1. Under General, for Additional Library Directories, enter the semicolon-separated paths:
        1. to the pthreads path you created above (e.g. ..\..\pthreads)
        2. to ogg.lib and vorbis.lib (which should be in mixxx-win[32|64]lib-msvc at this point, so you can just enter the path to that.)
      2. Under Linker, for Additional Dependencies, enter pthreadVC2.lib Ws2_32.lib winmm.lib ogg.lib vorbis.lib (If building Mixxx statically, you only need pthreadVC2.lib here since Mixxx links the others for Qt.)
    5. Click OK.
  10. Right click libshout and click Build. (If you get a bunch of "already defined" errors, go to Configuration Properties->Linker and under Linker, for Ignore Specific Library, enter LIBCMT.lib.)
  11. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: libshout-2.2.2\win32\Release\libshout.lib libshout-2.2.2\win32\Release\libshout.dll

TagLib

TagLib uses the CMake build system to build on Windows.

Dependencies

ZLib

You downloaded the zlib source above for libid3tag, but we actually need to build it for taglib.

VS 2005 x64 hacks

Follow these instructions for the following files:

zlib-1.2.5\contrib\vstudio\vc9\zlibvc.sln
zlib-1.2.5\contrib\vstudio\vc9\zlibvc.vcproj
Pre-build
  1. If you don't have MASM installed, just download the MASM object files from here and unpack into your zlib source tree. (Or choose the ReleaseWithoutASM configuration.)
  2. If you do:
    1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
    2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
    3. Type cd zlib-1.2.5\contrib\masmx64 or cd zlib-1.2.5\contrib\masmx86 depending on your platform.
    4. Type bld_ml64 or bld_ml32 depending on your platform.
Build
  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the zlib-1.2.5\contrib\vstudio\vc9\zlibvc.vcproj file via File->Open->Project/Solution.
  5. Choose the Release configuration and the Win32 platform.
  6. Right-click the zlibvc project and choose Properties
  7. Under Configuration Properties->C/C++->Preprocessor, add ZLIB_DLL to the list of Preprocessor Definitions
  8. Under Code Generation, ensure that Runtime Library is set to Multi-threaded DLL (/MD)
  9. Click OK
  10. Right-click the zlibvc project again and click Build
  11. When it's done, copy the following file to mixxx-win[32|64]lib-msvc:zlib-1.2.5\contrib\vstudio\vc9\x86\ZlibDllRelease\zlibwapi.dll (We don't need .h or .lib files for this since Mixxx itself doesn't use it.)

Install CMake

  1. Download CMake (the binary installer is all you need)
  2. Install it (The 32-bit version is fine for 64-bit systems)

Preparation

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. cd to where taglib is extracted, e.g. C:\sources\taglib-1.6.3
  4. Enter the command cmake -DWITH_ASF=ON -DWITH_MP4=ON -DZLIB_LIBRARY="C:\path\to\zlib123\projects\visualc6\Win32_DLL_Release\zlib1.lib" -DZLIB_INCLUDE_DIR="C:\path\to\zlib123" -G "Visual Studio 9 2008" (for x64 use "Visual Studio 9 2008 Win64")
  5. For VS Express 2005 on x64:
    1. The above command will return a failure. Run it again but hit CTRL-C before it finishes.
    2. Run it a third time and it will generate the x64 project files. ^_^
    3. Run it a fourth time to ensure the generated files are coherent.
    4. Follow these instructions for the following files: taglib-1.6.3\taglib.sln taglib-1.6.3\taglib\tag.vcproj

Build

  1. Run the Visual Studio GUI from this command line, telling it to use the environment variables, to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  2. Open the taglib-1.6.3\taglib\tag.vcproj file via File->Open->Project/Solution. (If on x64, ignore the platform warnings. The "tag" project should appear build-able.)
  3. Choose the Release configuration and the Win32 platform
  4. If building as a static library, ensure that Runtime Library under Configuration Properties->C/C++->Code generation is set to Multi-threaded DLL (/MD) to prevent duplicate symbol errors when linking Mixxx.
  5. Right click tag and click Build.
  6. When it finishes, copy the following files into mixxx-win32lib-msvc or mixxx-win64lib-msvc: taglib-1.6.3\taglib\Release\tag.lib taglib-1.6.3\taglib\Release\tag.dll
  7. If you get an error about unresolved external symbols, do the following:
    1. Re-open the zlib project above
    2. Right-click zlibvc and click Properties
    3. Go to Configuration Properties->C/C++->Preprocessor->Preprocessor Definitions and remove ZLIB_WINAPI from the list. (You may also need to add ZLIB_DLL.)
    4. Rebuild zlib & copy the dll file as above to the Mixxx lib folder
    5. Re-open taglib and rebuild
  8. Copy the following files into a taglib folder in mixxx-win[32|64]lib-msvc: taglib-1.6.3\taglib\toolkit\tfile.h taglib-1.6.3\taglib\toolkit\taglib.h taglib-1.6.3\taglib\toolkit\tbytevector.h taglib-1.6.3\taglib\taglib_export.h taglib-1.6.3\taglib_config.h taglib-1.6.3\taglib\ape\apetag.h taglib-1.6.3\taglib\tag.h taglib-1.6.3\taglib\toolkit\tstring.h taglib-1.6.3\taglib\toolkit\tmap.h taglib-1.6.3\taglib\toolkit\tmap.tcc
  9. Just copy every .h file from the taglib source tree into mixxx-win[32|64]lib-msvc\taglib. Some of the files just #include their counterparts in other directories with the actual content, so be careful to get the actual content ones. (Do a directory search for *.h, then sort by size. Copy everything that's over 2K, then copy everything 2K and under, rejecting conflicts.)
  10. Also copy the following files to mixxx-win[32|64]lib-msvc:taglib-1.6.3\taglib\toolkit\tmap.tcc taglib-1.6.3\taglib\toolkit\tlist.tcc taglib-1.6.3\taglib_config.h

protobuf

Google's protobuf provides MSVC project files, which makes things nice. Just open and build. (Step-by-step is given below.)

Build

  1. Start the platform SDK command prompt (Start->Microsoft Windows SDK->CMD Shell)
  2. Type setenv /xp /x64 /release and hit Enter. (Or setenv /xp /x86 /release for 32-bit.)
  3. Run the Visual Studio GUI from this command line, specifying the /useenv switch to have it use the Platform SDK compile tools, libs and includes. (e.g. C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\VCExpress.exe /useenv)
  4. Open the protobuf-2.4.1\vsprojects\protobuf.sln file via File->Open->Project/Solution.
  5. Answer 'Yes' to convert & open the project
  6. Choose the Release configuration and the Win32 platform
  7. Right-click libprotobuf-lite and click Build.
  8. When it finishes, right-click protoc and click Build.
  9. When that finishes, run the batch file protobuf-2.4.1\vsprojects\extract_includes.bat
  10. Copy the following files into mixxx-win[32|64]lib-msvc: protobuf-2.4.1\vsprojects\Release\libprotobuf-lite.lib protobuf-2.4.1\vsprojects\Release\protoc.exe protobuf-2.4.1\vsprojects\include\google (the entire directory)
  11. Your mixxx-win[32|64]lib-msvc now needs to be in your PATH when you build Mixxx so it can find protoc.exe.

x64 prep for VS Express 2005

If you're doing an x64 build with VS Express 2005, you'll first need to change some things in the vcproj and sln files in a text editor before you open them in VS:

  1. For the sln files:
    1. Replace all instances of "Win32" (case-sensitive) with "DontWantThis" or something similar
    2. Then replace all instances of "x64" with "Win32"
    3. Save the files
  2. For the vcproj files:
    1. Replace all instances of "|Win32" (case-sensitive) with "|DontWantThis" or something similar
    2. Replace all instances of "|x64" with "|Win32"
    3. In the <Platforms> section at the top of the file, change Name="Win32" to Name="DontWantThis" and Name="x64" to Name="Win32"
    4. Save the files
  3. Continue with the Build instructions above for the dependency in question. (Press your browser's Back button.)

Optimizations

Mixxx can benefit from various code optimizations. If you right-click each MSVC project and click Properties, you can set many optimization options. You can do any or all of the following:

  • Configuration Properties->C/C++->Optimization
  • Optimization: Maximize Speed (/O2) or Full Optimization (/Ox)
  • Favor Size or Speed: Favor Fast Code (/Ot) (unless building for memory-constrained systems)
  • Whole Program Optimization: Enable link-time code generation (/GL)
  • Configuration Properties->C/C++->Code Generation
  • Enable Enhanced Instruction Set: Streaming SIMD Extensions (/arch:SSE) or Streaming SIMD Extensions 2 (/arch:SSE2) if your CPU supports either
  • On x64, Configuration Properties->C/C++->Command Line
  • Add /favor:AMD64, /favor:EM64T (Intel64,) or /favor:blend (about the same on both)
  • Configuration Properties->Linker->Optimization
  • Eliminate Unreferenced Data (/OPT:REF)
  • Remove Redundant COMDATs (/OPT:ICF)
  • Use Link Time Code Generation (/ltcg)
  • Configuration Properties->Librarian->Command line
  • Add /LTCG

Linking with ASMLIB

If you want to link any of the VC++ projects against Agner Fog's optimized ASMLIB, do the following:

  1. Download the latest copy of the library from here
  2. Unzip it to a directory of your choice, say C:\asmlib
  3. Once you've started the VC++ IDE, Go to Tools->Options->Projects and Solutions->VC++ Directories
    1. Choose "Include files" on the right and add the path to the ASMLIB directory you set above, e.g. C:\asmlib
    2. Choose "Library files" on the right and add the path to the ASMLIB directory you set above, e.g. C:\asmlib
    3. Click OK.
  4. After opening the project/solution file, right-click each project, Choose Properties and do:
    1. Configuration Properties->C/C++->Optimization: Set Enable Intrinsic Functions to No.
    2. Configuration Properties->C/C++->Command Line: Add /Oi- to Additional Options.
    3. Configuration Properties->Linker->Input: Add alibcof64o.lib (or alibcof32o.lib for 32-bit) to "Additional Dependencies"

Note: Don't link libid3tag, libmad, taglib, or libshout with ASMLIB if you want to be able to link Mixxx itself with it.

Mixxx This is the Mixxx Wiki - Wiki Home | Website | Manual | News

NOTE: Due to an influx of spam we were forced to make the wiki read-only. If you'd like to change a page, please file an issue on Github or Zulip and post your changes there. Thank you.

Mixxx Wiki

Mixxx is a free and open-source DJ software.

Wiki Home
Website

Users

Manual
Hardware Compatibility
Reporting Bugs
Getting Involved

Developers

Contribution Guidelines
Coding Guidelines
Using Git
Developer Guide
Creating Skins

Mapping Creators

Contributing Mappings
Mixxx Controls
MIDI Scripting
Components JS
HID Scripting

Clone this wiki locally