ci-setup-anvil-simengine

#!/bin/bash

set -e

## configure SimEngine to model current deployment.
## this has to be executed _after_ VMs are booted or
## commands for adding simengine servers/bmcs will fail.

echo "Building simengine model"

# create model
systemctl stop simengine-core
simengine-cli model drop

# based on simengine.git/setup/setup-anvil/model-anvil

# Create 2 outlets, one powers 'an-ups01' another one powers 'an-ups02'
simengine-cli model create outlet -k1 -x=-861 -y=-171
simengine-cli model create outlet -k2 -x=-861 -y=351
# DR
simengine-cli model create outlet -k=11 -x=-861 -y=-693

# Add 2 UPSs for strikers and nodes
simengine-cli model create ups -k=3 \
    --name=an-ups01 \
    --host=10.201.3.1 \
    --mask=255.255.0.0 \
    --port=161 \
    --interface="bcn1_bridge1" \
    --serial-number="SVPD4D5QTQ3V" \
    --mac-address="f2325a5b0824" \
    -x=-895 -y=-182

simengine-cli model create ups -k=4 \
    --name=an-ups02 \
    --host=10.201.3.2 \
    --mask=255.255.0.0 \
    --port=161 \
    --interface="bcn1_bridge1" \
    --serial-number="8IAIMD9RX6KZ" \
    --mac-address="8117f9db70d4" \
    -x=-895 -y=347

# Add 1 UPS for DR node
simengine-cli model create ups -k=12 \
    --name=an-ups03 \
    --host=10.201.3.3 \
    --mask=255.255.0.0 \
    --port=161 \
    --interface="bcn1_bridge1" \
    --serial-number="129562D8A6DA" \
    --mac-address="8117f9db70d5" \
    -x=-895 -y=-704

# Create 2 PDUs for striker and nodes (no PDU for DR)
simengine-cli model create pdu -k=5 \
    --name=an-pdu01 \
    --host=10.201.2.1 \
    --mask=255.255.0.0 \
    --port=161 \
    --interface="bcn1_bridge1" \
    --serial-number="AQ5AKU1OORAX" \
    --mac-address="37436ab3c583" \
    -x=-36 -y=-161

simengine-cli model create pdu -k=6 \
    --name=an-pdu02 \
    --host=10.201.2.2 \
    --mask=255.255.0.0 \
    --port=161 \
    --interface="bcn1_bridge1" \
    --serial-number="95SQW45SVIFX" \
    --mac-address="b7bc37aa4d83" \
    -x=-36 -y=567

# Add BMCs for nodes
# --vmport must be changed to match $SERVER_PORT_PREFIX+$SERVER_IPMI_PORT_PREFIX+$idx in create-vms script
# --storcli-port must be changed to match $SERVER_PORT_PREFIX+$SERVER_STORAGE_PORT_PREFIX+$idx in create-vms script
# --password must be updated to match password set during Anvil setup (don't push the updated password to remote!)
simengine-cli model create server-bmc -k=7 \
    --domain-name=an-a01n01 \
    --power-consumption=360 \
    --no-power-on-ac \
    --host=10.201.11.1 \
    --port=623 \
    --vmport=20100 \
    --storcli-port=20300 \
    -x=-162 -y=320 \
    --interface="bcn1_bridge1" \
    --user="admin" \
    --password="Initial1" \
    --sensor-def="/usr/share/simengine/enginecore/enginecore/model/presets/sensors.json"

simengine-cli model create server-bmc -k=8 \
    --domain-name=an-a01n02 \
    --power-consumption=360 \
    --no-power-on-ac \
    --host=10.201.11.2 \
    --port=623 \
    --vmport=20101 \
    --storcli-port=20301 \
    -x=-171 -y=86 \
    --interface="bcn1_bridge1" \
    --user="admin" \
    --password="Initial1" \
    --sensor-def="/usr/share/simengine/enginecore/enginecore/model/presets/sensors.json"

# DR
simengine-cli model create server-bmc -k=13 \
    --domain-name=an-a01dr01 \
    --power-consumption=360 \
    --no-power-on-ac \
    --host=10.201.11.3 \
    --port=623 \
    --vmport=20102 \
    --storcli-port=20302 \
    -x=-162 -y=-704 \
    --interface="bcn1_bridge1" \
    --user="admin" \
    --password="Initial1" \
    --sensor-def="/usr/share/simengine/enginecore/enginecore/model/presets/sensors.json"

# Add 2 Striker Servers
simengine-cli model create server -k=9 \
    --domain-name=an-striker01 \
    --power-consumption=240 \
    --psu-num=1 \
    -x=738 \
    -y=101

simengine-cli model create server -k=10 \
    --domain-name=an-striker02 \
    --power-consumption=240 \
    --psu-num=1 \
    -x=734 \
    -y=326

### Power Components
# connect outlets & UPSs
simengine-cli model power-link -s1 -d3   # {_Mains_}==>[an-ups01]
simengine-cli model power-link -s2 -d4   # {_Mains_}==>[an-ups02]
# dr
simengine-cli model power-link -s11 -d12 # {_Mains_}==>[an-ups03]

# connect ups & pdus
simengine-cli model power-link -s31 -d5  # [an-ups01]==>[an-pdu01]
simengine-cli model power-link -s41 -d6  # [an-ups02]==>[an-pdu02]

# Power up servers
simengine-cli model power-link -s51 -d72 # [an-pdu01]={port-1}=>{psu-2}=>[an-a01n01]
simengine-cli model power-link -s52 -d82 # [an-pdu01]={port-2}=>{psu-2}=>[an-a01n02]

simengine-cli model power-link -s61 -d71 # [an-pdu02]={port-1}=>{psu-1}=>[an-a01n01]
simengine-cli model power-link -s62 -d81 # [an-pdu02]={port-2}=>{psu-1}=>[an-a01n02]

# DR
simengine-cli model power-link -s121 -d131   # [an-ups03]={port-1}==>[an-a01dr01]={psu-1}
simengine-cli model power-link -s122 -d132   # [an-ups03]={port-2}==>[an-a01dr01]={psu-2}

# Power Up Striker Servers
simengine-cli model power-link -s58 -d91  # [an-pdu01]={port-8}=>{psu-1}=>[an-striker01]
simengine-cli model power-link -s68 -d101 # [an-pdu02]={port-8}=>{psu-1}=>[an-striker02]

systemctl start simengine-core

exit 0