diff --git a/src/devices/tpms_aston_martin.c b/src/devices/tpms_aston_martin.c
deleted file mode 100644
index 5fee50476..000000000
--- a/src/devices/tpms_aston_martin.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/** @file
-    Aston Martin Smartire TPMS sensor.
-
-    Copyright (C) 2024 Bruno OCTAU (ProfBoc75)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-*/
-
-#include "decoder.h"
-
-/**
-Aston Martin Smartire TPMS sensor.
-- Vantage Smartire / Aston Martin DB9 protocol, from 1/2005 till 12/2011
-
-S.a. issue #3067
-
-Data Layout:
-- Total of 10 messages at a time, OOK PCM and Differential MC coded.
-- 2 types of message have been identified.
-- 1 Message with Pressure information follow by
-- 1 Message with Temperature information
-- Both messages are repeated 5 times
-- In case of fast pressure increasing, the pressure message is sent with Fast increased flag, then the 10 messages each 2 seconds with the flag.
-
-Flex decoder:
-
-    rtl_433 -X 'n=Aston-Martin-Smartire,m=OOK_PCM,s=167,l=167,r=600,preamble=32b4,decode_dm'
-
-Preamble/Syncword  .... : 0x32b4
-
-    6 bytes message
-    Byte Position   0  1  2  3  4  5
-    Sample         28 3f ff ff 00 fa
-                   VV |I II II || CC
-                      |        ||
-                 +----+-+  +----------+
-                 | 1234 |  | 12345678 |
-                 | MMII |  | FFFFFFXX |
-                 +------+  +----------+
-
-- VV: {8} Pressure value, offset 40, scale 2.5 if Message Type = 0x00
-          Temperature Value, offset 40,        if Message Type = 0x01
-- MM: {2} Message Type, 0x00 or 0x01
-- II:{22} Sensor ID,
-- F : {8} Flags, F1 = quick inflate detected,
-                 F2 to F6 are unknown,
-                 X78:{2} Looks like XOR/checksum/Parity from previous bits, not decoded.
-- C : {7} CRC-7, poly 0x45, init 0x6f, final XOR 0x00
-
-Bitbench:
-
-    TEMP/PRESSURE 8d MESSAGE_TYPE 2b ID 22d FAST_INCREASE 1b FLAGS ? 5b PARITY_XOR ? 2b CRC_SEVEN 7b 1x
-
-*/
-
-static int tpms_aston_martin_decode(r_device *decoder, bitbuffer_t *bitbuffer)
-{
-    bitbuffer_t decoded = { 0 };
-    uint8_t *b;
-    uint8_t const preamble_pattern[] = {0x32, 0xb4};
-    uint8_t len_msg = 6;
-    float pressure_kPa = 0;
-    int temperature_C = 0;
-
-    if (bitbuffer->num_rows != 1) {
-        return DECODE_ABORT_EARLY;
-    }
-
-    int pos = bitbuffer_search(bitbuffer, 0, 0, preamble_pattern, sizeof(preamble_pattern) * 8);
-    if (pos >= bitbuffer->bits_per_row[0]) {
-        decoder_logf(decoder, 1, __func__, "Preamble not found");
-        return DECODE_ABORT_EARLY;
-    }
-
-    decoder_log_bitrow(decoder, 1, __func__, bitbuffer->bb[0], bitbuffer->bits_per_row[0], "MSG");
-    bitbuffer_differential_manchester_decode(bitbuffer, 0, pos + sizeof(preamble_pattern) * 8, &decoded, len_msg * 8);
-    decoder_log_bitrow(decoder, 1, __func__, decoded.bb[0], decoded.bits_per_row[0], "DMC");
-
-    // check msg length
-    if (decoded.bits_per_row[0] < (len_msg * 8) - 1 ) { // always missing last bit
-        decoder_logf(decoder, 1, __func__, "Too short");
-        return DECODE_ABORT_LENGTH;
-    }
-
-    b = decoded.bb[0];
-
-    // verify checksum
-    if (crc7(b, len_msg, 0x45, 0x6f)) {
-        decoder_logf(decoder, 1, __func__, "crc error");
-        return DECODE_FAIL_MIC; // crc mismatch
-    }
-
-    int id       = ((b[1] & 0x3f) << 16) | (b [2] << 8) | b[3];
-    int msg_type = (b[1] & 0xc0) >> 6;
-    int value    = b[0] - 40;
-
-    if (msg_type == 0) { // pressure
-        pressure_kPa = value * 2.5;
-    }
-    else if (msg_type == 1) { // temperature
-        temperature_C = value;
-    }
-    else {
-        decoder_logf(decoder, 1, __func__, "Unknown message type %x", msg_type);
-        return DECODE_ABORT_EARLY;
-    }
-
-    int inflate = (b[4] & 0x80) >> 7;
-    int flags   = b[4] & 0x7f;
-
-    /* clang-format off */
-    data_t *data = data_make(
-            "model",         "",              DATA_STRING, "Aston-Martin-Smartire",
-            "type",          "",              DATA_STRING, "TPMS",
-            "id",            "",              DATA_INT,    id,
-            "pressure_kPa",  "Pressure",      DATA_COND, msg_type == 0, DATA_FORMAT, "%.1f kPa", DATA_DOUBLE, (double)pressure_kPa,
-            "temperature_C", "Temperature",   DATA_COND, msg_type == 1, DATA_FORMAT, "%.1f C",   DATA_DOUBLE, (double)temperature_C,
-            "inflate",       "Inflate",       DATA_COND, inflate == 1,  DATA_INT, 1,
-            "flags",         "Flags",         DATA_FORMAT, "%07b", DATA_INT, flags,
-            "mic",           "Integrity",     DATA_STRING, "CRC",
-            NULL);
-    /* clang-format on */
-
-    decoder_output_data(decoder, data);
-    return 1;
-}
-
-static char const *const output_fields[] = {
-        "model",
-        "type",
-        "id",
-        "pressure_kPa",
-        "temperature_C",
-        "inflate",
-        "flags",
-        "mic",
-        NULL,
-};
-
-r_device const tpms_aston_martin = {
-        .name        = "Aston Martin Smartire TPMS sensor, Vantage DB9 protocol",
-        .modulation  = OOK_PULSE_PCM,
-        .short_width = 167,
-        .long_width  = 167,
-        .reset_limit = 1000,
-        .decode_fn   = &tpms_aston_martin_decode,
-        .fields      = output_fields,
-};