🚀 Public URLs to expose your local webapp without external proxies in your LAN
Set of Nginx and Docker configurations to launch a Nginx reverse proxy
running in the HTTPS port (443), using a public SSL certificate for
domains *.local-ip.medicmobile.org. The SSL certificate is signed by a CA authority
and provided for free by local-ip.medicmobile.org. Moreover,
they have a free DNS service that provides wildcard DNS for any IP
address, including private IPs:
$ dig 10-0-0-1.local-ip.medicmobile.org +short
10.0.0.1
So having a public certificate and a public DNS that resolves to your local IP address, you can launch the HTTPS server to proxy your local app built with whatever stack, and connect any browser, app or device that requires to access it with HTTPS like the Android apps, that some times don't work without a secure connection.
Eg. if your webapp runs locally in the port 5988, and your
local IP is 192.168.0.3, you normally access the app
with http://192.168.0.3:5988 in the same device or any other
device within the same network, but you can access your app with
the URL https://192-168-0-3.local-ip.medicmobile.org launching the Docker
configuration in the same machine as follows:
Only the first time:
$ git clone https://github.com/medic/nginx-local-ip.git
Then:
$ cd nginx-local-ip/
$ APP_URL=http://192.168.0.3:5988 docker compose up
Note that the IP set in the APP_URL environment variable is passed
as it is in your computer, but the URL to access the app in the devices
separates each number from the IP address by -
(isn't .): https://192-168-0-3.local-ip.medicmobile.org .
Anyway, you will see the final URL logged in the console when the container is launched:
Also note that you cannot use the localhost IP 127.0.0.1, it needs to
be the IP of your WiFi connection, Ethernet connection, or whatever
connection your computer has with the network is connected to. You
can get your IP address in a Unix system with ifconfig or ip addr.
Your computer may also have other virtual interfaces with IP addresses
assigned, omit them, like the IP of the docker0 interface.
📶 Tip: if your IP is defined dynamically, try with
ip addr show dynamic.
The server also opens the port 80 so if you forget to write the URL with https:// , Nginx redirects the request to the HTTPS version for you 😉.
The HTTP/HTTPS ports (80/443) need to accept traffic from the IP address of your host machine and your local webapp port (e.g. 5988) needs to accept traffic from the IP address of the nginx-local-ip container (on the Docker network). If you are using the UFW firewall (in a Linux environment) you can allow traffic on these ports with the following commands:
Since local IP addresses can change over time, ranges are used in these rules so that the firewall configuration does not have to be updated each time a new address is assigned.
$ sudo ufw allow proto tcp from 192.168.0.0/16 to any port 80,443
$ sudo ufw allow proto tcp from 172.16.0.0/16 to any port 5988A local image is created the first time executed, and there is no need to rebuild it if you change the Nginx configuration or the entrypoint.sh file. Only changes to the Dockerfile script require a rebuild. If you just edit the Nginx configuration, or want to change the ports mapped, only restart the container is needed.
If you do need to rebuild the container, append --build on to your compose call: docker compose up --build.
The certs are downloaded and cached from local-ip.medicmobile.org on first run. On subsequent runs, the entrypoint.sh script checks locally whether they are expired and downloads renewed certs from local-ip.medicmobile.org if needed.
The default ports used in nginx-local-ip might conflict with the standard web server ports of
that the medic-os docker image uses to run, 80 and 443. To fix this, specify nginx-local-ip
to use the medic-os.env file. Using the included env-file the container will avoid 80 and 443
and use 8080 and 444 for http and https respectively. Your instance will be available
at https://192-168-0-3.local-ip.medicmobile.org:444/
Command to run:
APP_URL=https://192.168.0.3 docker compose --env-file=medic-os.env up
To avoid running the nginx-local-ip container all together, consider adding the local-ip certs directly to your medic-os container. This simplifies your development environment by having one less docker image. First download the certs then follow the steps already published in self hosting on how to install the certs.
If the IP of your local machine is 192.168.0.3, you could then access your instance directly at https://192-168-0-3.local-ip.medicmobile.org/ after adding the certs. This way there is no nginx-local-ip container as a reverse proxy because medic-os hosts the certs internally.
NOTE - You will have to manually refresh the local-ip certificates if you use this approach.
Only Docker and Docker compose installed are needed, and despite
this setup helps you to connect your devices with your webapp using
a local connection (without complex reverse proxy connections through
Internet like Ngrok.com), the devices that want to connect with the app
still need access to Internet just to resolve the *.local-ip.medicmobile.org domain
against the local-ip.medicmobile.org public DNS, unless you configure your own DNS server
within your network, which needs to be configured in all the devices were you
are going to use the app. In that case, no Internet connection will be required,
just a LAN connection.
By default, this service works with local-ip.medibmobile.org (which in turn uses localtls), but it can be configured to work with any provider that offers:
- publicly downloadable TLS certificates via
curl - DNS resolution based off IP-in-URL
For example, if you wanted to use local-ip.co (though use with caution), you would set these four environment variables for you Docker Compose call:
CERT_PEM_SRCset to tohttp://local-ip.co/cert/server.pemCERT_CHAIN_SRCset tohttp://local-ip.co/cert/chain.pemCERT_KEY_SRCset tohttp://local-ip.co/cert/server.keyDOMAINset tomy.local-ip.co
Using inline variables, this would look like:
CERT_PEM_SRC=http://local-ip.co/cert/server.pem \
CERT_CHAIN_SRC=http://local-ip.co/cert/chain.pem \
CERT_KEY_SRC=http://local-ip.co/cert/server.key \
DOMAIN=my.local-ip.co \
docker compose up If you run docker compose and you get a address already in use error like this:
ERROR: for nginx-local-ip_app_1 Cannot start service app: driver failed programming external connectivity on endpoint nginx-local-ip_app_1 (5a31171148dcaa58b4053f793288aaa940f5678043d302c1c1ad87
5cdae3a684): Error starting userland proxy: listen tcp4 0.0.0.0:443: bind: address already in use
You may need to change one or both ports. For example, you could shift them up to 8xxx like so:
$ HTTP=8080 HTTPS=8443 APP_URL=http://192.168.1.3:5988 docker compose up
Also, a convenient environment file can be used to store the new values as suggested in the Running with Medic-OS section:
my.env file:
HTTP=8080
HTTPS=8443
Run with: APP_URL=https://192.168.1.3:5988 docker compose --env-file=my.env up
You would then access your dev instance with the 8443 port.
Using the sample URL from above, it would go from https://192-168-0-3.local-ip.medicmobile.org
to this instead https://192-168-0-3.local-ip.medicmobile.org:8443.
Copyright 2021 Medic Mobile, Inc. [email protected].
The SSL certificate files are downloaded from Internet at runtime, and are property of local-ip.medicmobile.org.
The software is provided under AGPL-3.0. Contributions to this project are accepted under the same license.