0000_50_cluster-monitoring-operator_04-config.yaml

# This configmap is used by the cluster monitoring operator to configure the
# telemeter client which is in charge of reading the metrics from the
# in-cluster Prometheus instances and forwarding them to the Telemetry service.
#
# The only supported key in metrics.yaml is "matches" which is a list of label
# selectors that define which metrics are going to be forwarded. Label
# selectors can select a single metric (e.g. '{__name__="foo"}') or all
# metric names matching a regexp (e.g. '{__name__=~"foo:.+"}').
#
# Every entry should be commented with the owners (GitHub handles preferred)
# and a short description of the metric(s). It is also possible to mention the
# consumers (again handles preferred) so that any change to the metric can be
# communicated to the right audience.
apiVersion: v1
data:
  metrics.yaml: |-
    matches:
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # cluster:usage recording rules summarize important usage information
    # about the cluster that points to specific features or component usage
    # that may help identify problems or specific workloads. For example,
    # cluster:usage:openshift:build:rate24h would show the number of builds
    # executed within a 24h period so as to determine whether the current
    # cluster is using builds and may be susceptible to eviction due to high
    # disk usage from build temporary directories.
    # All metrics under this prefix must have low (1-5) cardinality and must
    # be well-scoped and follow proper naming and scoping conventions.
    - '{__name__=~"cluster:usage:.*"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # count:up0 contains the count of cluster monitoring sources being marked as down.
    # This information is relevant to the health of the registered
    # cluster monitoring sources on a cluster. This metric allows telemetry
    # to identify when an update causes a service to begin to crash-loop or
    # flake.
    - '{__name__="count:up0"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # count:up1 contains the count of cluster monitoring sources being marked as up.
    # This information is relevant to the health of the registered
    # cluster monitoring sources on a cluster. This metric allows telemetry
    # to identify when an update causes a service to begin to crash-loop or
    # flake.
    - '{__name__="count:up1"}'
    #
    # owners: (@openshift/openshift-team-cincinnati)
    #
    # cluster_version reports what payload and version the cluster is being
    # configured to and is used to identify what versions are on a cluster that
    # is experiencing problems.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="cluster_version"}'
    #
    # owners: (@openshift/openshift-team-cincinnati)
    #
    # cluster_version_available_updates reports the channel and version server
    # the cluster is configured to use and how many updates are available. This
    # is used to ensure that updates are being properly served to clusters.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="cluster_version_available_updates"}'
    #
    # owners: (@openshift/openshift-team-cincinnati)
    #
    # cluster_version_capability reports the names of enabled and available
    # cluster capabilities.  This is used to gauge the popularity of optional
    # components and exposure to any component-specific issues.
    - '{__name__="cluster_version_capability"}'
    #
    # owners: (@openshift/openshift-team-cincinnati)
    #
    # cluster_operator_up reports the health status of the core cluster
    # operators - like up, an upgrade that fails due to a configuration value
    # on the cluster will help narrow down which component is affected.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="cluster_operator_up"}'
    #
    # owners: (@openshift/openshift-team-cincinnati)
    #
    # cluster_operator_conditions exposes the status conditions cluster
    # operators report for debugging. The condition and status are reported.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="cluster_operator_conditions"}'
    #
    # owners: (@openshift/openshift-team-cincinnati)
    #
    # cluster_version_payload captures how far through a payload the cluster
    # version operator has progressed and can be used to identify whether
    # a particular payload entry is causing failures during upgrade.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="cluster_version_payload"}'
    #
    # owners: (@openshift/openshift-team-installer, @openshift/openshift-team-cincinnati)
    #
    # cluster_installer reports what installed the cluster, along with its
    # version number and invoker.
    #
    # consumers: (@openshift/openshift-team-olm)
    - '{__name__="cluster_installer"}'
    #
    # owners: (@openshift/openshift-team-master, @smarterclayton)
    #
    # cluster_infrastructure_provider reports the configured cloud provider if
    # any, along with the infrastructure region when running in the public
    # cloud.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="cluster_infrastructure_provider"}'
    #
    # owners: (@openshift/openshift-team-master, @smarterclayton)
    #
    # cluster_feature_set reports the configured cluster feature set and
    # whether the feature set is considered supported or unsupported.
    - '{__name__="cluster_feature_set"}'
    #
    # owners: (@openshift/openshift-team-etcd, @smarterclayton)
    #
    # instance:etcd_object_counts:sum identifies two key metrics:
    # - the rough size of the data stored in etcd and
    # - the consistency between the etcd instances.
    #
    # consumers: (@openshift/openshift-team-olm)
    - '{__name__="instance:etcd_object_counts:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # alerts are the key summarization of the system state. They are reported
    # via telemetry to assess their value in detecting upgrade failure causes
    # and also to prevent the need to gather large sets of metrics that are
    # already summarized on the cluster.  Reporting alerts also creates an
    # incentive to improve per cluster alerting for the purposes of preventing
    # upgrades from failing for end users.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="ALERTS",alertstate="firing"}'
    #
    # owners: (@openshift/ops)
    #
    # code:apiserver_request_total:rate:sum identifies average of occurences
    # of each http status code over 10 minutes
    # The metric will be used for SLA analysis reports.
    #
    # consumers: (@openshift/openshift-team-olm)
    - '{__name__="code:apiserver_request_total:rate:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # cluster:capacity_cpu_cores:sum is the total number of CPU cores in the
    # cluster labeled by node role and type.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="cluster:capacity_cpu_cores:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # cluster:capacity_memory_bytes:sum is the total bytes of memory in the
    # cluster labeled by node role and type.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="cluster:capacity_memory_bytes:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # cluster:cpu_usage_cores:sum is the current amount of CPU used by
    # the whole cluster.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="cluster:cpu_usage_cores:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # cluster:memory_usage_bytes:sum is the current amount of memory in use
    # across the whole cluster.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="cluster:memory_usage_bytes:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # openshift:cpu_usage_cores:sum is the current amount of CPU used by
    # OpenShift components, including the control plane and host services
    # (including the kernel).
    #
    # consumers: (@openshift/openshift-team-olm)
    - '{__name__="openshift:cpu_usage_cores:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # openshift:memory_usage_bytes:sum is the current amount of memory used by
    # OpenShift components, including the control plane and host services
    # (including the kernel).
    - '{__name__="openshift:memory_usage_bytes:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # workload:cpu_usage_cores:sum is the current amount of CPU used by cluster
    # workloads, excluding infrastructure.
    #
    # consumers: (@openshift/openshift-team-olm)
    - '{__name__="workload:cpu_usage_cores:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # workload:memory_usage_bytes:sum is the current amount of memory used by
    # cluster workloads, excluding infrastructure.
    #
    # consumers: (@openshift/openshift-team-olm)
    - '{__name__="workload:memory_usage_bytes:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # cluster:virt_platform_nodes:sum is the number of nodes reporting
    # a particular virt_platform type (nodes may report multiple types).
    # This metric helps identify issues specific to a virtualization
    # type or bare metal.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="cluster:virt_platform_nodes:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # cluster:node_instance_type_count:sum is the number of nodes of each
    # instance type and role.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="cluster:node_instance_type_count:sum"}'
    #
    # owners: (https://github.com/kubevirt)
    #
    # cnv:vmi_status_running:count is the total number of VM instances running in the cluster.
    - '{__name__="cnv:vmi_status_running:count"}'
    #
    # owners: (https://github.com/kubevirt)
    #
    # cluster:vmi_request_cpu_cores:sum is the total number of CPU cores requested by pods of VMIs.
    - '{__name__="cluster:vmi_request_cpu_cores:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # node_role_os_version_machine:cpu_capacity_cores:sum is the total number
    # of CPU cores in the cluster labeled by master and/or infra node role, os,
    # architecture, and hyperthreading state.
    #
    # consumers: (@openshift/openshift-team-olm, @openshift/openshift-team-cluster-manager)
    - '{__name__="node_role_os_version_machine:cpu_capacity_cores:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring, @smarterclayton)
    #
    # node_role_os_version_machine:cpu_capacity_sockets:sum is the total number
    # of CPU sockets in the cluster labeled by master and/or infra node role,
    # os, architecture, and hyperthreading state.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="node_role_os_version_machine:cpu_capacity_sockets:sum"}'
    #
    # owners: (@openshift/openshift-team-olm)
    #
    # subscription_sync_total is the number of times an OLM operator
    # Subscription has been synced, labelled by name and installed csv
    - '{__name__="subscription_sync_total"}'
    #
    # owners: (@openshift/openshift-team-olm)
    #
    # olm_resolution_duration_seconds is the duration of a dependency resolution attempt.
    - '{__name__="olm_resolution_duration_seconds"}'
    #
    # owners: (@openshift/openshift-team-olm)
    #
    # csv_succeeded is unique to the namespace, name, version, and phase
    # labels.  The metrics is always present and can be equal to 0 or 1, where
    # 0 represents that the csv is not in the succeeded state while 1
    # represents that the csv is in the succeeded state.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="csv_succeeded"}'
    #
    # owners: (@openshift/openshift-team-olm)
    #
    # csv_abnormal represents the reason why a csv is not in the succeeded
    # state and includes the namespace, name, version, phase, reason labels.
    # When a csv is updated, the previous time series associated with the csv
    # will be deleted.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="csv_abnormal"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # cluster:kube_persistentvolumeclaim_resource_requests_storage_bytes:provisioner:sum
    # gives the total amount of storage requested by PVCs from a particular
    # storage provisioner in bytes. This is a generic storage metric.
    - '{__name__="cluster:kube_persistentvolumeclaim_resource_requests_storage_bytes:provisioner:sum"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # cluster:kubelet_volume_stats_used_bytes:provisioner:sum will gives
    # the total amount of storage used by PVCs from a particular storage provisioner in bytes.
    - '{__name__="cluster:kubelet_volume_stats_used_bytes:provisioner:sum"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # ceph_cluster_total_bytes gives the size of ceph cluster in bytes. This is a specific OCS metric.
    - '{__name__="ceph_cluster_total_bytes"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # ceph_cluster_total_used_raw_bytes is the amount of ceph cluster storage used in bytes.
    - '{__name__="ceph_cluster_total_used_raw_bytes"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # ceph_health_status gives the ceph cluster health status
    - '{__name__="ceph_health_status"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # odf_system_raw_capacity_total_bytes gives the size of storage cluster in bytes. This is a specific OCS metric.
    - '{__name__="odf_system_raw_capacity_total_bytes"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # odf_system_raw_capacity_used_bytes is the amount of storage cluster storage used in bytes.
    - '{__name__="odf_system_raw_capacity_used_bytes"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # odf_system_health_status gives the storage cluster health status
    - '{__name__="odf_system_health_status"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:ceph_osd_metadata:count is the total count of osds.
    - '{__name__="job:ceph_osd_metadata:count"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:kube_pv:count is the total number of Persistent Volumes created by ODF present in OCP cluster.
    # This metric is deprecated in ODF 4.12, refer to job:odf_system_pvs:count instead.
    - '{__name__="job:kube_pv:count"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:odf_system_pvs:count is the total number of Persistent Volumes created by ODF present in OCP cluster.
    - '{__name__="job:odf_system_pvs:count"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:ceph_pools_iops:total is the total iops (reads+writes) value for all the pools in ceph cluster
    - '{__name__="job:ceph_pools_iops:total"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:ceph_pools_iops:total is the total iops (reads+writes) value in bytes for all the pools in ceph cluster
    - '{__name__="job:ceph_pools_iops_bytes:total"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:ceph_versions_running:count is the total count of ceph cluster versions running.
    - '{__name__="job:ceph_versions_running:count"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:noobaa_total_unhealthy_buckets:sum is the total number of unhealthy noobaa buckets
    - '{__name__="job:noobaa_total_unhealthy_buckets:sum"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:noobaa_bucket_count:sum is the total number of noobaa buckets.
    # This metric is deprecated in ODF 4.12, refer to odf_system_bucket_count instead.
    - '{__name__="job:noobaa_bucket_count:sum"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # job:noobaa_total_object_count:sum is the total number of noobaa objects.
    # This metric is deprecated in ODF 4.12, refer to odf_system_objects_total instead.
    - '{__name__="job:noobaa_total_object_count:sum"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # odf_system_bucket_count is the total number of buckets in ODF system
    - '{__name__="odf_system_bucket_count", system_type="OCS", system_vendor="Red Hat"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # odf_system_objects_total is the total number of objects in ODF system
    - '{__name__="odf_system_objects_total", system_type="OCS", system_vendor="Red Hat"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # noobaa_accounts_num gives the count of noobaa's accounts.
    - '{__name__="noobaa_accounts_num"}'
    #
    # owners: (@openshift/team-ocs-committers)
    #
    # noobaa_total_usage gives the total usage of noobaa's storage in bytes.
    - '{__name__="noobaa_total_usage"}'
    #
    # owners: (@openshift/origin-web-console-committers)
    # console_url is the url of the console running on the cluster.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="console_url"}'
    #
    # owners: (@openshift/hybrid-application-console-maintainers)
    # cluster:console_auth_login_requests_total:sum gives the total number of login requests initiated from the web console.
    #
    - '{__name__="cluster:console_auth_login_requests_total:sum"}'
    #
    # owners: (@openshift/hybrid-application-console-maintainers)
    # cluster:console_auth_login_successes_total:sum gives the total number of successful logins initiated from the web console.
    # Labels:
    # * `role`, one of `kubeadmin`, `cluster-admin` or `developer`. The value is based on whether or not the logged-in user can list all namespaces.
    #
    - '{__name__="cluster:console_auth_login_successes_total:sum"}'
    #
    # owners: (@openshift/hybrid-application-console-maintainers)
    # cluster:console_auth_login_failures_total:sum gives the total number of login failures initiated from the web console.
    # This might include canceled OAuth logins depending on the user OAuth provider/configuration.
    # Labels:
    # * `reason`, currently always `unknown`
    #
    - '{__name__="cluster:console_auth_login_failures_total:sum"}'
    #
    # owners: (@openshift/hybrid-application-console-maintainers)
    # cluster:console_auth_logout_requests_total:sum gives the total number of logout requests sent from the web console.
    # Labels:
    # * `reason`, currently always `unknown`
    #
    - '{__name__="cluster:console_auth_logout_requests_total:sum"}'
    #
    # owners: (@openshift/hybrid-application-console-maintainers)
    # cluster:console_usage_users:max contains the number of web console users splitten into the roles.
    # Labels:
    # * `role`: `kubeadmin`, `cluster-admin` or `developer`. The value is based on whether or not the user can list all namespaces.
    #
    - '{__name__="cluster:console_usage_users:max"}'
    #
    # owners: (@openshift/hybrid-application-console-maintainers)
    # cluster:console_plugins_info:max reports information about the web console plugins and their state.
    # Labels:
    # * `name`: `redhat`, `demo` or `other`.
    # * `state`: `enabled`, `disabled` or `notfound`
    #
    - '{__name__="cluster:console_plugins_info:max"}'
    #
    # owners: (@openshift/hybrid-application-console-maintainers)
    # cluster:console_customization_perspectives_info:max reports information about customized web console perspectives.
    # Labels:
    # * `name`, one of `admin`, `dev`, `acm` or `other`
    # * `state`, one of `enabled`, `disabled`, `only-for-cluster-admins`, `only-for-developers` or `custom-permissions`
    #
    - '{__name__="cluster:console_customization_perspectives_info:max"}'
    #
    # owners: (@openshift/networking)
    #
    # ovnkube_master_egress_routing_via_host" informs if the OVN-K cluster's gateway mode is
    # `routingViaOVN` (0), `routingViaHost` (1) or invalid (2).
    - '{__name__="cluster:ovnkube_master_egress_routing_via_host:max"}'
    #
    # owners: (@openshift/networking)
    #
    # cluster:network_attachment_definition_instances:max" gives max no of instance
    # in the cluster that are annotated with k8s.v1.cni.cncf.io/networks, labelled by networks.
    - '{__name__="cluster:network_attachment_definition_instances:max"}'
    #
    # owners: (@openshift/networking)
    #
    # cluster:network_attachment_definition_enabled_instance_up  informs (1 or 0) if the cluster has
    # at least max of one instance with  k8s.v1.cni.cncf.io/networks annotation, labelled by networks (any or sriov).
    - '{__name__="cluster:network_attachment_definition_enabled_instance_up:max"}'
    #
    # owners: (@openshift/network-edge)
    #
    # cluster:ingress_controller_aws_nlb_active:sum informs how many NLBs are active in AWS.
    # Zero would indicate ELB (legacy). This metric is only emitted on AWS.
    - '{__name__="cluster:ingress_controller_aws_nlb_active:sum"}'
    #
    # owners: (@openshift/network-edge)
    #
    # cluster:route_metrics_controller_routes_per_shard:min tracks the minimum number of routes
    # admitted by any of the shards.
    - '{__name__="cluster:route_metrics_controller_routes_per_shard:min"}'
    #
    # owners: (@openshift/network-edge)
    #
    # cluster:route_metrics_controller_routes_per_shard:max tracks the maximum number of routes
    # admitted by any of the shards.
    - '{__name__="cluster:route_metrics_controller_routes_per_shard:max"}'
    #
    # owners: (@openshift/network-edge)
    #
    # cluster:route_metrics_controller_routes_per_shard:avg tracks the average value for the
    # route_metrics_controller_routes_per_shard metric.
    - '{__name__="cluster:route_metrics_controller_routes_per_shard:avg"}'
    #
    # owners: (@openshift/network-edge)
    #
    # cluster:route_metrics_controller_routes_per_shard:median tracks the median value for the
    # route_metrics_controller_routes_per_shard metric.
    - '{__name__="cluster:route_metrics_controller_routes_per_shard:median"}'
    #
    # owners: (@openshift/network-edge)
    #
    # cluster:openshift_route_info:tls_termination:sum tracks the number of routes for each tls_termination
    # value. The possible values for tls_termination are edge, passthrough and reencrypt.
    - '{__name__="cluster:openshift_route_info:tls_termination:sum"}'
    #
    # owners: (https://github.com/openshift/insights-operator/blob/master/OWNERS)
    #
    # insightsclient_request_send tracks the number of metrics sends.
    - '{__name__="insightsclient_request_send_total"}'
    #
    # owners: (@openshift/openshift-team-app-migration)
    #
    # cam_app_workload_migrations tracks number of app workload migrations
    # by current state. Tracked migration states are idle, running, completed, and failed.
    - '{__name__="cam_app_workload_migrations"}'
    #
    # owners: (@openshift/openshift-team-master)
    #
    # cluster:apiserver_current_inflight_requests:sum:max_over_time:2m gives maximum number of requests in flight
    # over a 2-minute window. This metric is a constant 4 time series that monitors concurrency of kube-apiserver and
    # openshift-apiserver with request type which can be either 'mutating' or 'readonly'.
    # We want to have an idea of how loaded our api server(s) are globally.
    - '{__name__="cluster:apiserver_current_inflight_requests:sum:max_over_time:2m"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # cluster:alertmanager_integrations:max tracks the total number of active alertmanager integrations sent via telemetry from each cluster.
    - '{__name__="cluster:alertmanager_integrations:max"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # cluster:telemetry_selected_series:count tracks the total number of series
    # sent via telemetry from each cluster.
    - '{__name__="cluster:telemetry_selected_series:count"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # openshift:prometheus_tsdb_head_series:sum tracks the total number of active series
    - '{__name__="openshift:prometheus_tsdb_head_series:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # openshift:prometheus_tsdb_head_samples_appended_total:sum tracks the rate of samples ingested
    # by prometheusi.
    - '{__name__="openshift:prometheus_tsdb_head_samples_appended_total:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # monitoring:container_memory_working_set_bytes:sum tracks the memory usage of the monitoring
    # stack.
    - '{__name__="monitoring:container_memory_working_set_bytes:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # namespace_job:scrape_series_added:topk3_sum1h tracks the top 3 namespace/job groups which created series churns in the last hour.
    - '{__name__="namespace_job:scrape_series_added:topk3_sum1h"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # namespace_job:scrape_samples_post_metric_relabeling:topk3 tracks the top 3 prometheus targets which produced more samples.
    - '{__name__="namespace_job:scrape_samples_post_metric_relabeling:topk3"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # monitoring:haproxy_server_http_responses_total:sum tracks the number of times users access
    # monitoring routes.
    - '{__name__="monitoring:haproxy_server_http_responses_total:sum"}'
    #
    # owners: (@openshift/openshift-team-monitoring)
    #
    # profile:cluster_monitoring_operator_collection_profile:max contains information about the configured
    # collection profile.
    # Possible label values are:
    #   profile: full|minimal (refer: cluster-monitoring-operator/pkg/manifests#SupportedCollectionProfiles)
    - '{__name__="profile:cluster_monitoring_operator_collection_profile:max"}'
    #
    # owners: (https://github.com/integr8ly, @david-martin)
    #
    # rhmi_status reports the status of an RHMI installation.
    # Possible values are bootstrap|cloud-resources|monitoring|authentication|products|solution-explorer|deletion|complete.
    # This metric is used by OCM to detect when an RHMI installation is complete & ready to use i.e. rhmi_status{stage='complete'}
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="rhmi_status"}'
    #
    # owners: (https://github.com/integr8ly, @boomatang)
    #
    # rhoam_state captures the currently installed/upgrading RHOAM versions.
    # Possible label values are:
    #   status= in progress|complete
    #   upgrading= true|false
    #   version= x.y.z
    # This metric is used by cs-SRE to gain insights into RHOAM version.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="status:upgrading:version:rhoam_state:max"}'
    #
    # owners: (https://github.com/integr8ly, @boomatang)
    #
    # rhoam_critical_alerts count of RHOAM specific critical alerts on a cluster
    # Possible label values are:
    #   state= pending|firing
    # This metric is used by CS-SRE to gain insights into critical alerts on RHOAM cluster.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="state:rhoam_critical_alerts:max"}'
    #
    # owners: (https://github.com/integr8ly, @boomatang)
    #
    # rhoam_warning_alerts count of RHOAM specific warning alerts on a cluster
    # Possible label values are:
    #   state= pending|firing
    # This metric is used by CS-SRE to gain insights into warning alerts on RHOAM cluster.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="state:rhoam_warning_alerts:max"}'
    #
    # rhoam_7d_slo_percentile:max Current cluster 7 day percentile
    # Possible labels: None
    # This metric is used by CS-SRE to monitor the SLO budget across the fleet.
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="rhoam_7d_slo_percentile:max"}'
    #
    # rhoam_7d_slo_remaining_error_budget:max Time in milliseconds of remaining error budget
    # Possible labels: None
    # This metric is used byt CS-SRE to monitor remaining error budget across the fleet
    #
    # consumers: (@openshift/openshift-team-cluster-manager)
    - '{__name__="rhoam_7d_slo_remaining_error_budget:max"}'
    #
    #
    # owners: (openshift/openshift-team-master, @openshift/openshift-group-b)
    #
    # cluster_legacy_scheduler_policy reports whether the scheduler operator is
    # configured with a custom Policy file. This value is a boolean 0|1
    - '{__name__="cluster_legacy_scheduler_policy"}'
    #
    # owners: (openshift/openshift-team-master, @openshift/openshift-group-b)
    #
    # cluster_master_schedulable reports whether mastersSchedulable=true in
    # the scheduler operator. This value is a boolean 0|1
    - '{__name__="cluster_master_schedulable"}'
    #
    # owners: (https://github.com/redhat-developer/codeready-workspaces, @ibuziuk)
    #
    # The number of workspaces with a given status STARTING|STOPPED|RUNNING|STOPPING. Type 'gauge'.
    - '{__name__="che_workspace_status"}'
    #
    # owners: (https://github.com/redhat-developer/codeready-workspaces, @ibuziuk)
    #
    # The number of started workspaces. Type 'counter'.
    - '{__name__="che_workspace_started_total"}'
    #
    # owners: (https://github.com/redhat-developer/codeready-workspaces, @ibuziuk)
    #
    # The number of failed workspaces.
    # Can be used with the 'while' label e.g. {while="STARTING"}, {while="RUNNING"}, {while="STOPPING"}.Type 'counter'.
    - '{__name__="che_workspace_failure_total"}'
    #
    # owners: (https://github.com/redhat-developer/codeready-workspaces, @ibuziuk)
    #
    # The time in seconds required for the startup of all the workspaces.
    - '{__name__="che_workspace_start_time_seconds_sum"}'
    #
    # owners: (https://github.com/redhat-developer/codeready-workspaces, @ibuziuk)
    #
    # The overall number of attempts for starting all the workspaces.
    - '{__name__="che_workspace_start_time_seconds_count"}'
    #
    # owners: (@openshift/openshift-team-hive)
    #
    # Track current mode the cloud-credentials-operator is functioning under.
    - '{__name__="cco_credentials_mode"}'
    #
    # owners: (@openshift/storage)
    #
    # Persistent Volume usage metrics: this is the number of volumes per plugin
    # and per volume type (filesystem/block)
    - '{__name__="cluster:kube_persistentvolume_plugin_type_counts:sum"}'
    #
    # owners: (https://github.com/open-cluster-management, @open-cluster-management/squad-kui-admins)
    #
    # visual_web_terminal_sessions_total is the count of Visual Web Terminal sessions created
    # on the hub cluster.
    - '{__name__="visual_web_terminal_sessions_total"}'
    #
    # owners: (https://github.com/open-cluster-management, @open-cluster-management/cluster-lifecycle-admin)
    #
    # acm_managed_cluster_info provides Subscription watch and other information for the managed clusters for an ACM Hub cluster.
    - '{__name__="acm_managed_cluster_info"}'
    #
    # owners: (@openshift/storage)
    #
    # VMWare vCenter info: version of the vCenter where cluster runs
    - '{__name__="cluster:vsphere_vcenter_info:sum"}'
    #
    # owners: (@openshift/storage)
    #
    # The list of ESXi host versions used as host for OCP nodes.
    - '{__name__="cluster:vsphere_esxi_version_total:sum"}'
    #
    # owners: (@openshift/storage)
    #
    # The list of virtual machine HW versions used for OCP nodes.
    - '{__name__="cluster:vsphere_node_hw_version_total:sum"}'
    #
    # owners: (@openshift/team-build-api)
    #
    # openshift:build_by_strategy:sum measures total number of builds on a cluster, aggregated by build strategy.
    - '{__name__="openshift:build_by_strategy:sum"}'
    #
    # owners: (https://github.com/red-hat-data-services/odh-deployer, Open Data Hub team)
    #
    # This is (at a basic level) the availability of the RHODS system.
    - '{__name__="rhods_aggregate_availability"}'
    #
    # owners: (https://github.com/red-hat-data-services/odh-deployer, Open Data Hub team)
    #
    # The total number of users of RHODS using each component.
    - '{__name__="rhods_total_users"}'
    #
    # owners: (@openshift/team-etcd)
    #
    # 99th percentile of etcd WAL fsync duration.
    - '{__name__="instance:etcd_disk_wal_fsync_duration_seconds:histogram_quantile",quantile="0.99"}'
    #
    # owners: (@openshift/team-etcd)
    #
    # Sum by instance of total db size. Used for understanding and improving defrag controller.
    - '{__name__="instance:etcd_mvcc_db_total_size_in_bytes:sum"}'
    #
    # owners: (@openshift/team-etcd)
    #
    # 99th percentile of peer to peer latency.
    - '{__name__="instance:etcd_network_peer_round_trip_time_seconds:histogram_quantile",quantile="0.99"}'
    #
    # owners: (@openshift/team-etcd)
    #
    # Sum by instance of total db size in use.
    - '{__name__="instance:etcd_mvcc_db_total_size_in_use_in_bytes:sum"}'
    #
    # owners: (@openshift/team-etcd)
    #
    # 99th percentile of the backend commit duration.
    - '{__name__="instance:etcd_disk_backend_commit_duration_seconds:histogram_quantile",quantile="0.99"}'
    #
    # owners: (@tracing-team)
    #
    # Number of jaeger instances using certain storage type.
    - '{__name__="jaeger_operator_instances_storage_types"}'
    #
    # owners: (@tracing-team)
    #
    # Number of jaeger instances with certain strategy .
    - '{__name__="jaeger_operator_instances_strategies"}'
    #
    # owners: (@tracing-team)
    #
    # Number of jaeger instances used certain agent strategy
    - '{__name__="jaeger_operator_instances_agent_strategies"}'
    #
    # owners: (https://github.com/redhat-developer/application-services-metering-operator)
    #
    # The current amount of CPU used by Application Services products, aggregated by product name.
    - '{__name__="appsvcs:cores_by_product:sum"}'
    #
    # owners: (https://github.com/openshift/cluster-node-tuning-operator)
    #
    # Number of nodes using a custom TuneD profile not shipped by the Node Tuning Operator.
    - '{__name__="nto_custom_profiles:count"}'
    # owners: (@openshift/team-build-api)
    #
    # openshift_csi_share_configmap measures amount of config maps shared by csi shared resource driver.
    - '{__name__="openshift_csi_share_configmap"}'
    #
    # owners: (@openshift/team-build-api)
    #
    # openshift_csi_share_secret measures amount of secrets shared by csi shared resource driver.
    - '{__name__="openshift_csi_share_secret"}'
    #
    # owners: (@openshift/team-build-api)
    #
    # openshift_csi_share_mount_failures_total measures amount of failed attempts to mount csi shared resources into the pods.
    - '{__name__="openshift_csi_share_mount_failures_total"}'
    #
    # owners: (@openshift/team-build-api)
    #
    # openshift_csi_share_mount_requests_total measures total amount of attempts to mount csi shared resources into the pods.
    - '{__name__="openshift_csi_share_mount_requests_total"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # Number of storages types used across the fleet.
    - '{__name__="eo_es_storage_info"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # Number of redundancy policies used across the fleet.
    - '{__name__="eo_es_redundancy_policy_info"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # Number of namespaces deleted per policy across the fleet.
    - '{__name__="eo_es_defined_delete_namespaces_total"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # Number of clusters with misconfigured memory resources across the fleet.
    - '{__name__="eo_es_misconfigured_memory_resources_info"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # Number of data nodes per cluster.
    - '{__name__="cluster:eo_es_data_nodes_total:max"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # Number of documents created per cluster.
    - '{__name__="cluster:eo_es_documents_created_total:sum"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # Number of documents deleted per cluster.
    - '{__name__="cluster:eo_es_documents_deleted_total:sum"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # Number of shards per cluster.
    - '{__name__="pod:eo_es_shards_total:max"}'
    #
    # elasticsearch operator metrics for Telemetry
    # owners: (@openshift/team-logging)
    #
    # es Management state used by the cluster.
    - '{__name__="eo_es_cluster_management_state_info"}'
    #
    # owners: (@openshift/openshift-team-image-registry)
    #
    # imageregistry:imagestreamtags_count:sum is the total number of existent image stream tags.
    - '{__name__="imageregistry:imagestreamtags_count:sum"}'
    #
    # owners: (@openshift/openshift-team-image-registry)
    #
    # imageregistry:operations_count:sum is the total number of image pushes and pulls executed in the internal registry.
    - '{__name__="imageregistry:operations_count:sum"}'
    #
    # owners: (@openshift/team-logging)
    #
    # log_logging_info gives cluster-logging-operator version, managedStatus, healthStatus specific info.
    - '{__name__="log_logging_info"}'
    #
    # owners: (@openshift/team-logging)
    #
    # log_collector_error_count_total gives cluster-logging-operator deployed collector's (e.g. default collector fluentd) total number of failures in standing it up part of logging pipeline.
    - '{__name__="log_collector_error_count_total"}'
    #
    # owners: (@openshift/team-logging)
    #
    # log_forwarder_pipeline_info gives cluster-logging-operator deployed logging pipelines info - healthStatus and pipelineInfo as no of total logging pipelines deployed.
    - '{__name__="log_forwarder_pipeline_info"}'
    #
    # owners: (@openshift/team-logging)
    #
    # log_forwarder_input_info gives cluster-logging-operator logging pipelines input types info - namely application, infra, audit type of log sources input.
    - '{__name__="log_forwarder_input_info"}'
    #
    # owners: (@openshift/team-logging)
    #
    # log_forwarder_output_info gives cluster-logging-operator logging pipelines output types info - namely to which output end point logs are being directed for further pushing them to a persistent storage.
    - '{__name__="log_forwarder_output_info"}'
    #
    # owners: (@openshift/team-logging)
    #
    # cluster:log_collected_bytes_total:sum gives total bytes collected by the collector and aggregated at each cluster level
    - '{__name__="cluster:log_collected_bytes_total:sum"}'
    #
    # owners: (@openshift/team-logging)
    #
    # cluster:log_logged_bytes_total:sum gives total bytes logged by the containers and aggregated at each cluster level
    - '{__name__="cluster:log_logged_bytes_total:sum"}'
    #
    # owners: (@openshift/sandboxed-containers-operator)
    #
    # cluster:kata_monitor_running_shim_count:sum provides the number of VM
    # running with kata containers on the cluster
    - '{__name__="cluster:kata_monitor_running_shim_count:sum"}'
    #
    # owners: (@openshift/team-hypershift-maintainers)
    #
    # platform:hypershift_hostedclusters:max is the total number of clusters managed by the hypershift operator by cluster platform
    - '{__name__="platform:hypershift_hostedclusters:max"}'
    #
    # owners: (@openshift/team-hypershift-maintainers)
    #
    # platform:hypershift_nodepools:max is the total number of nodepools managed by the hypershift operator by cluster platform
    - '{__name__="platform:hypershift_nodepools:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Number of unhealthy Object Bucket Claims in addon's namespace.
    - '{__name__="namespace:noobaa_unhealthy_bucket_claims:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Number of Object Bucket Claims in addon's namespace.
    - '{__name__="namespace:noobaa_buckets_claims:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Number of unhealthy namespace resources in addon's namespace.
    - '{__name__="namespace:noobaa_unhealthy_namespace_resources:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Number of namespace resources in addon's namespace.
    - '{__name__="namespace:noobaa_namespace_resources:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Number of unhealthy namespace buckets in addon's namespace.
    - '{__name__="namespace:noobaa_unhealthy_namespace_buckets:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Number of namespace buckets in addon's namespace.
    - '{__name__="namespace:noobaa_namespace_buckets:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Number of corresponding noobaa accounts in addon's namespace.
    - '{__name__="namespace:noobaa_accounts:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Total usage of the noobaa system storage resources in the addon's namespace.
    - '{__name__="namespace:noobaa_usage:max"}'
    #
    # owners: (https://github.com/red-hat-storage/mcg-osd-deployer, Data Federation team)
    #
    # Status of the noobaa service in the addon's namespace.
    - '{__name__="namespace:noobaa_system_health_status:max"}'
    #
    # owners: (https://github.com/red-hat-storage/ocs-operator, OCS Operator team)
    #
    # ocs_advanced_feature_usage shows whether the cluster is using any of the advanced
    # features, like external cluster mode or KMS/PV Encryption etc
    - '{__name__="ocs_advanced_feature_usage"}'
    #
    # owners: (https://github.com/openshift/machine-config-operator/)
    #
    # os_image_url_override:sum tells whether cluster is using default OS image or has been overridden by user
    - '{__name__="os_image_url_override:sum"}'
    #
    # owners: (https://github.com/openshift/vmware-vsphere-csi-driver-operator, @openshift/storage)
    #
    # cluster:vsphere_topology_tags:max shows how many vSphere topology tag categories are configured.
    - '{__name__="cluster:vsphere_topology_tags:max"}'
    #
    # owners: (https://github.com/openshift/vmware-vsphere-csi-driver-operator, @openshift/storage)
    #
    # cluster:vsphere_infrastructure_failure_domains:max shows how many vSphere failure domains, vCenters, datacenters and datastores are configured in a cluster.
    - '{__name__="cluster:vsphere_infrastructure_failure_domains:max"}'
    #
    # owners: (https://github.com/openshift/vmware-vsphere-csi-driver-operator, @openshift/storage)
    #
    # cluster:vsphere_csi_migration:max shows if CSI migration for vSphere was enabled or not.
    - '{__name__="cluster:vsphere_csi_migration:max"}'
    #
    # owners: (@openshift/openshift-team-api, @polynomial)
    #
    # apiserver_list_watch_request_success_total:rate:sum represents the rate of change for successful LIST and WATCH requests over a 5 minute period.
    - '{__name__="apiserver_list_watch_request_success_total:rate:sum", verb=~"LIST|WATCH"}'
kind: ConfigMap
metadata:
  name: telemetry-config
  namespace: openshift-monitoring
  annotations:
    include.release.openshift.io/ibm-cloud-managed: "true"
    include.release.openshift.io/self-managed-high-availability: "true"
    include.release.openshift.io/single-node-developer: "true"