Adding few more sensors for Fairland pool heat pump

[LukeStrc]

Hi.

Please could anybody create pull request / add following lines of code at the end of the tuya-local/custom_components/tuya_local/devices/fairland_iphcr15_heatpump.yaml file? It adds several new sensors. Maybe the Min and Max are not so important (added just because of "why not" :-) ), but current temperature and required temperature are very usefull in my perspective. I plan to write automation to turn on pool filtration when I'm returning power to grid & the required temperature differs more than 1 C from the current one (I know that when there is no water flow the current temperature is highly influenced by weather, but I plan to add some another thermometer which will be directly in the pool...).

BTW if somebody know how to improve it and take into account temperature_unit, it would be awesome!

Thank you!

The code:

  - entity: sensor
    category: diagnostic
    name: Water temperature
    icon: "mdi:thermometer"
    class: temperature
    dps:
      - id: 102
        type: integer
        name: sensor
        unit: "°C"
        class: measurement
  - entity: sensor
    category: diagnostic
    name: Required temperature
    icon: "mdi:thermometer"
    class: temperature
    dps:
      - id: 106
        type: integer
        name: sensor
        unit: "°C"
        class: measurement
  - entity: sensor
    category: diagnostic
    name: Minimum temperature
    icon: "mdi:thermometer"
    class: temperature
    dps:
      - id: 107
        type: integer
        name: sensor
        unit: "°C"
        class: measurement
  - entity: sensor
    category: diagnostic
    name: Maximum temperature
    icon: "mdi:thermometer"
    class: temperature
    dps:
      - id: 108
        type: integer
        name: sensor
        unit: "°C"
        class: measurement

[LukeStrc]

BTW on HA forum is pasted list of all registers
https://community.home-assistant.io/t/fairland-heat-pump-to-ha/304871/23
Might be useful maybe...

[make-all]

These are all available from the climate entity already. Just read them from there in your automation.

[LukeStrc]

Ok. You are right it is possible (I'm new in HA so still learning a lot...). My first use-case was to just add it as an entity to the entity list on board to see the temperature just with other information in list. Without defining it as a sensor it is not possible if I'm correct.
But now I realized I can either create template entity where I can read the value from climate entity or add whole cliamate entity to the Entity list and I'll see both important temperatures...

Anyway, thank you a lot for information and for your work!