Recommended Difficulty?

[spleen911]

I have 4 harvesters and 2 are double the physical size of the others. All have 3060Ti GPUs and I am running a static DIFF of 10,000.

The C18/C29 systems AVG 6 & 7sec and MAX 13 & 19sec over 12H respectively.

SPLEEN has 54 single SATA3 over USB3 across 7 controllers
DEEPDISH has 120 SAS2 in RAID0 (11 arrays of 6-12-24HDDs) across 3 controllers

The C30/C31 systems AVG 5s and MAX 12s over 12H.

Wondering if I should increase my DIFF to offset the C30 & C31 plots

I'm hoping to not have to get better GPUs and chill for a while @256 filter.

Harvester	C#	GPU	PLOTS	Physical	Effective	Gain	% More Space
SPLEEN	C18	3060Ti (8GB)	2815	576.26	1149.95	573.69	99.55
	C29	--	8795
DEEPDISH	C18	3060Ti (8GB)	2100	525.47	1059.84	534.37	101.69
	C29	--	8600
PLOTTER	C30	3060Ti (8GB)	5300	224.18	524.82	300.64	134.11
LASAGNA	C31	3060Ti (8GB)	2700	101.83	267.36	165.53	162.56
			30310	1.394	2.932	1574.23	110.26

[madMAx43v3r]

It looks like everything is good, no worries.

[spleen911]

Thank you. As a test, I increased DIFF to 12,500 and did not notice much of a change (as expected). I am sending 2-3 PPH with an occasional hour of no partials. No impact to points or SP times. Since I still have some C18 to replot to C29 and another ~10TB of C31 to plot, I'll leave it as-is unless the C1 harvester starts logging warnings.

[madMAx43v3r]

Yep, just move to 20k if there's too many stales.