diff --git a/scripts/__pycache__/htmlPreprocessorDefines.cpython-311.pyc b/scripts/__pycache__/htmlPreprocessorDefines.cpython-311.pyc index 6dca7de6..6681c7af 100644 Binary files a/scripts/__pycache__/htmlPreprocessorDefines.cpython-311.pyc and b/scripts/__pycache__/htmlPreprocessorDefines.cpython-311.pyc differ diff --git a/src/CHANGES.md b/src/CHANGES.md index b222fcaf..cede20cb 100644 --- a/src/CHANGES.md +++ b/src/CHANGES.md @@ -1,1523 +1,54 @@ -# Development Changes +Changelog v0.8.140 -## 0.8.139 - 2024-08-15 -* fix reload after save for WiFi configurations (5s -> 20s) - -## 0.8.138 - 2024-08-15 -* fix ePaper not functional #1722 - -## 0.8.137 - 2024-08-13 -* fix storage of timezone and region #1723 - -## 0.8.136 - 2024-08-12 -* fix save settings for ESP32 devices #1720 - -## 0.8.135 - 2024-08-11 -* translated `/system` #1717 -* added default pin seetings for opendtufusion board -* fixed ethernet static IP -* fixed ethernet MAC address read back - -## 0.8.134 - 2024-08-10 -* combined Ethernet and WiFi variants - Ethernet is now always included, but needs to be enabled if needed -* improved statistic data in `/system` -* redesigned `/system` - -## 0.8.133 - 2024-08-10 -* Ethernet variants now support WiFi as fall back / configuration - -## 0.8.132 - 2024-08-09 -* fix boot loop once no ePaper is connected #1713, #1714 -* improved refresh routine of ePeper -* added default pin seetings for opendtufusion board - -## 0.8.131 - 2024-08-08 -* improved refresh routine of ePaper, full refresh each 12h #1107 #1706 - -## 0.8.130 - 2024-08-04 -* fix message `ERR_DUPLICATE_INVERTER` #1705, #1700 -* merge PR: Power limit command accelerated #1704 -* merge PR: reduce update cycle of ePaper from 5 to 10 seconds #1706 -* merge PR: small fixes in different files #1711 -* add timestamp to JSON output #1707 -* restart Ahoy using MqTT #1667 - -## 0.8.129 - 2024-07-11 -* sort alarms ascending #1471 -* fix alarm counter for first alarm -* prevent add inverter multiple times #1700 - -## 0.8.128 - 2024-07-10 -* add environments for 16MB flash size ESP32-S3 aka opendtufusion -* prevent duplicate alarms, update end time once it is received #1471 - -## 0.8.127 - 2024-06-21 -* add grid file #1677 -* merge PR: Bugfix Inv delete not working with password protection #1678 - -## 0.8.126 - 2024-06-12 -* merge PR: Update pubMqtt.h - Bugfix #1673 #1674 - -## 0.8.125 - 2024-06-09 -* fix ESP8266 compilation -* merge PR: active_PowerLimit #1663 - -## 0.8.124 - 2024-06-06 -* improved MqTT `OnMessage` (threadsafe) -* support of HERF inverters, serial number is converted in Javascript #1425 -* revert buffer size in `RestAPI` for ESP8266 #1650 - -## 0.8.123 - 2024-05-30 -* fix ESP8266, ESP32 static IP #1643 #1608 -* update MqTT library which enhances stability #1646 -* merge PR: MqTT JSON Payload pro Kanal und total, auswählbar #1541 -* add option to publish MqTT as json -* publish rssi not on ch0 any more, published on `topic/rssi` -* add total power to index page (if multiple inverters are configured) -* show device name in html title #1639 -* update AsyncWebserver library to `3.2.2` -* add environment name to filename of coredump - -## 0.8.122 - 2024-05-23 -* add button for donwloading coredump (ESP32 variants only) - -## 0.8.121 - 2024-05-20 -* fix ESP32 factory image generation -* fix plot of history graph #1635 - -## 0.8.120 - 2024-05-18 -* fix crash if invalid serial number was set -> inverter will be disabled automatically -* improved and fixed factory image generation -* fix HMT-1800-4T number of inputs #1628 - -## 0.8.119 - 2024-05-17 -* fix reset values at midnight if WiFi isn't available #1620 -* fix typo in English versions -* add yield day to history graph #1614 +* added HMS-400-1T support (serial number 1125...) +* added further ESP8266 versions (-all, -minimal) because of small ressources on ESP8266 +* added some Gridprofiles +* added support for characters in serial number of inverter (A-F) +* added default coordinates on fresh install, needed for history graph on display and WebUI +* added option to reset values on communication start (sunrise) +* added max inverter temperature to WebUI +* added yield day to history graph * added script and [instructions](../manual/factory_firmware.md) how to generate factory firmware which includes predefined settings -* merge PR: Fix MI overnight behaviour #1626 - -## 0.8.118 - 2024-05-10 -* possible fix reset max values #1609 -* slightly improved WiFi reconnect -* update AsyncWebserver to `3.2.0` - -## 0.8.117 - 2024-05-09 -* fix reboot issue #1607 #1606 -* fix max temperature tooltip if only one inverter is configured #1605 - -## 0.8.116 - 2024-05-05 -* calculation of max AC power -* fix counter overflow communication queue -* added max inverter temperature - -## 0.8.115 - 2024-05-03 -* fix inverter communication with manual time sync #1603 +* added button for downloading coredump (ESP32 variants only) to `/system`. Once a crash happens the reason can be checked afterwards (even after a reboot) +* added support of HERF inverters, serial number is converted in Javascript +* added device name to HTML title +* added feature to restart Ahoy using MqTT +* added feature to publish MqTT messages as JSON as well (new setting) +* add timestamp to JSON output +* improved communication to inverter +* improved translation to German +* improved HTML pages, reduced in size by only including relevant contents depending by chip type +* improved history graph in WebUI +* improved network routines +* improved Wizard +* improved WebUI by disabling upload and import buttons when no file is selected * improved queue, only add new object once they not exist in queue -* added option to reset values on communication start (sunrise) -* fixed calculation of max AC power (API, MqTT) - -## 0.8.114 - 2024-04-29 -* fix ESP8266 compile -* fix history graph -* fix close button color of modal windows in dark mode #1598 -* fix only one total field in `/live` #1579 - -## 0.8.113 - 2024-04-25 -* code cleanup -* fix ESP32-C3 compile - -## 0.8.112 - 2024-04-24 -* improved wizard -* converted ePaper and Ethernet to hal-SPI -* improved network connection - -## 0.8.111 - 2024-04-17 -* fix MqTT discovery field `ALARM_MES_ID` #1591 -* fix Wifi reconnect for ESP32 #1589 #1575 -* open link from `index.html` in new tab #1588 #1587 -* merge PR: Disable upload and import buttons when no file is selected #1586 #1519 - -## 0.8.110 - 2024-04-11 -* revert CMT2300A changes #1553 -* merged PR: fix closing tag #1584 -* add disable retain flag #1582 -* fix German translation #1569 -* improved `Wizard` - -## 0.8.109 - 2024-04-09 -* fix hal patch - -## 0.8.108 - 2024-04-09 -* point to git SHA for `NRF24` library - -## 0.8.107 - 2024-04-08 -* fix boot loop on `reboot on midnight` feature #1542, #1599, #1566, #1571 -* fix German translation #1569 -* improved `Wizard` - -## 0.8.106 - 2024-04-05 -* fix bootloop with CMT and NRF on ESP32 #1566 #1562 -* possible fix of #1553 +* improved MqTT `OnMessage` (threadsafe) +* improved read of alarms, prevent duplicates, update alarm time if there is an update +* improved alarms are now sorted in ascending direction +* improved by prevent add inverter multiple times +* improved sending active power controll commands +* improved refresh routine of ePaper, full refresh each 12h +* redesigned WebUI on `/system` +* changed MqTT retained flags * change MqTT return value of power limit acknowledge from `boolean` to `float`. The value returned is the same as it was set to confirm reception (not the read back value) +* converted ePaper and Ethernet to hal-SPI +* combined Ethernet and WiFi variants - Ethernet is now always included, but needs to be enabled if needed +* changed: Ethernet variants (W5500) now support WiFi as fall back / configuration +* switch AsyncWebserver library +* fixed autodiscovery for homeassistant +* fix reset values functionality +* fix read back of active power control value, now it has one decimal place +* fix NTP issues +* fixed MqTT discovery field `ALARM_MES_ID` +* fix close button color of modal windows in dark mode +* fixed calculation of max AC power +* fixed reset values at midnight if WiFi isn't available +* fixed HMT-1800-4T number of inputs +* fix crash if invalid serial number was set -> inverter will be disabled automatically +* fixed ESP8266, ESP32 static IP +* fixed ethernet MAC address read back +* update several libraries to more recent versions +* removed `yield efficiency` because the inverter already calculates correct -## 0.8.105 - 2024-04-05 -* cleanup of `defines.h` -* fix compile of esp32-minimal - -## 0.8.104 - 2024-04-04 -* fix reboot on inverter save (ESP32) #1559 -* fix NRF and Ethernet #1506 - -## 0.8.103 - 2024-04-02 -* merge PR: fix: get refresh property from object #1552 -* merge PR: fix typos and spelling in Github Issue template #1550 -* merge PR: shorten last cmt waiting time #1549 -* fix cppcheck warnings -* changed MqTT retained flags of some topics - -## 0.8.102 - 2024-04-01 -* fix NTP for `opendtufusion` #1542 -* fix scan WiFi in AP mode -* fix MDNS #1538 -* improved Wizard -* improved MqTT on devcontrol e.g. set power limit - -## 0.8.101 - 2024-03-28 -* updated converter scripts to include all enabled features again (redundant scan of build flags) #1534 - -## 0.8.100 - 2024-03-27 -* fix captions in `/history #1532 -* fix get NTP time #1529 #1530 -* fix translation #1516 - -## 0.8.99 - 2024-03-27 -* fix compilation of all environments - -## 0.8.98 - 2024-03-24 -* new network routines - -## 0.8.97 - 2024-03-22 -* add support for newest generation of inverters with A-F in their serial number -* fix NTP and sunrise / sunset -* set default coordinates to the mid of Germany #1516 - -## 0.8.96 - 2024-03-21 -* fix precision of power limit in `/live` #1517 -* fix translation of `Werte ausgeben` in `settings` #1507 -* add grid profile #1518 - -## 0.8.95 - 2024-03-17 -* fix NTP issues #1440 #1497 #1499 - -## 0.8.94 - 2024-03-16 -* switched AsyncWebServer library -* Ethernet version now uses same AsyncWebServer library as Wifi version -* fix translation of `/history` -* fix RSSI on `/history` #1463 - -## 0.8.93 - 2024-03-14 -* improved history graph in WebUI #1491 -* merge PR: 1491 - -## 0.8.92 - 2024-03-10 -* fix read back of limit value, now with one decimal place -* added grid profile for Mexico #1493 -* added language to display on compile time #1484, #1255, #1479 -* added new environment `esp8266-all` which replace the original `esp8266`. The original now only have `MqTT` support but `Display` and `History` plugins are not included any more #1451 - -## 0.8.91 - 2024-03-05 -* fix javascript issues #1480 - -## 0.8.90 - 2024-03-05 -* added preprocessor defines to HTML (from platform.ini) to reduce the HTML in size if modules aren't enabled -* auto build minimal English versions of ESP8266 and ESP32 - -## 0.8.89 - 2024-03-02 -* merge PR: Collection of small fixes #1465 -* fix: show esp type on `/history` #1463 -* improved HMS-400-1T support (serial number 1125...) #1460 - -## 0.8.88 - 2024-02-28 -* fix MqTT statistic data overflow #1458 -* add HMS-400-1T support (serial number 1125...) #1460 -* removed `yield efficiency` because the inverter already calculates correct #1243 -* merge PR: Remove hint to INV_RESET_MIDNIGHT resp. INV_PAUSE_DURING_NIGHT #1431 - -## 0.8.87 - 2024-02-25 -* fix translations #1455 #1442 - -## 0.8.86 - 2024-02-23 -* RestAPI check for parent element to be JsonObject #1449 -* fix translation #1448 #1442 -* fix reset values when inverter status is 'not available' #1035 #1437 - -## 0.8.85 - 2024-02-22 -* possible fix of MqTT fix "total values are sent to often" #1421 -* fix translation #1442 -* availability check only related to live data #1035 #1437 - -## 0.8.84 - 2024-02-19 -* fix homeassistant autodiscovery #1432 -* merge PR: more gracefull handling of complete retransmits #1433 - -# RELEASE 0.8.83 - 2024-02-16 - -## 0.8.82 - 2024-02-15 -* fixed crash once firmware version was read and sent via MqTT #1428 -* possible fix: reset yield offset on midnight #1429 - -## 0.8.81 - 2024-02-13 -* fixed authentication with empty token #1415 -* added new setting for future function to send log via MqTT -* combined firmware and hardware version to JSON topics (MqTT) #1212 - -## 0.8.80 - 2024-02-12 -* optimize API authentication, Error-Codes #1415 -* breaking change: authentication API command changed #1415 -* breaking change: limit has to be send als `float`, `0.0 .. 100.0` #1415 -* updated documentation #1415 -* fix don't send control command twice #1426 - -## 0.8.79 - 2024-02-11 -* fix `opendtufusion` build (started only once USB-console was connected) -* code quality improvments - -## 0.8.78 - 2024-02-10 -* finalized API token access #1415 -* possible fix of MqTT fix "total values are sent to often" #1421 -* removed `switchCycle` from `hmsRadio.h` #1412 -* merge PR: Add hint to INV_RESET_MIDNIGHT resp. INV_PAUSE_DURING_NIGHT #1418 -* merge PR: simplify rxOffset logic #1417 -* code quality improvments - -## 0.8.77 - 2024-02-08 -* merge PR: BugFix: ACK #1414 -* fix suspicious if condition #1416 -* prepared API token for access, not functional #1415 - -## 0.8.76 - 2024-02-07 -* revert changes from yesterday regarding snprintf and its size #1410, #1411 -* reduced cppcheck linter warnings significantly -* try to improve ePaper (ghosting) #1107 - -## 0.8.75 - 2024-02-06 -* fix active power control value #1406, #1409 -* update Mqtt lib to version `1.6.0` -* take care of null terminator of chars #1410, #1411 - -## 0.8.74 - 2024-02-05 -* reduced cppcheck linter warnings significantly - -## 0.8.73 - 2024-02-03 -* fix nullpointer during communication #1401 -* added `max_power` to MqTT total values #1375 - -## 0.8.72 - 2024-02-03 -* fixed translation #1403 -* fixed sending commands to inverters which are soft turned off #1397 -* reduce switchChannel command for HMS (only each 5th cycle it will be send now) - -## 0.8.71 - 2024-02-03 -* fix heuristics reset -* fix CMT missing frames problem -* removed inverter gap setting -* removed add to total (MqTT) inverter setting -* fixed sending commands to inverters which are soft turned off -* save settings before they are exported #1395 -* fix autologin bug if no password is set -* translated `/serial` -* removed "yield day" history - -## 0.8.70 - 2024-02-01 -* prevent sending commands to inverter which isn't active #1387 -* protect commands from popup in `/live` if password is set #1199 - -## 0.8.69 - 2024-01-31 -* merge PR: Dynamic retries, pendular first rx chan #1394 - -## 0.8.68 - 2024-01-29 -* fix HMS / HMT startup -* added `flush_rx` to NRF on TX -* start with heuristics set to `0` -* added warning for WiFi channel 12-14 (ESP8266 only) #1381 - -## 0.8.67 - 2024-01-29 -* fix HMS frequency -* fix display of inverter id in serial log (was displayed twice) - -## 0.8.66 - 2024-01-28 -* added support for other regions - untested #1271 -* fix generation of DTU-ID; was computed twice without reset if two radios are enabled - -## 0.8.65 - 2024-01-24 -* removed patch for NRF `PLOS` -* fix lang issues #1388 -* fix build on Windows of `opendtufusion` environments (git: trailing whitespaces) - -## 0.8.64 - 2024-01-22 -* add `ARC` to log (NRF24 Debug) -* merge PR: ETH NTP update bugfix #1385 - -## 0.8.63 - 2024-01-22 -* made code review -* fixed endless loop #1387 - -## 0.8.62 - 2024-01-21 -* updated version in footer #1381 -* repaired radio statistics #1382 - -## 0.8.61 - 2024-01-21 -* add favicon to header -* improved NRF communication -* merge PR: provide localized times to display mono classes #1376 -* merge PR: Bypass OOM-Crash on minimal version & history access #1378 -* merge PR: Add some REST Api Endpoints to avail_endpoints #1380 - -## 0.8.60 - 2024-01-20 -* merge PR: non blocking nRF loop #1371 -* merge PR: fixed millis in serial log #1373 -* merge PR: fix powergraph scale #1374 -* changed inverter gap to `1` as default (old settings will be overridden) - -## 0.8.59 - 2024-01-18 -* merge PR: solve display settings dependencies #1369 -* fix language typos #1346 -* full update of ePaper after booting #1107 -* fix MqTT yield day reset even if `pause inverter during nighttime` isn't active #1368 - -## 0.8.58 - 2024-01-17 -* fix missing refresh URL #1366 -* fix view of grid profile #1365 -* fix webUI translation #1346 -* fix protection mask #1352 -* merge PR: Add Watchdog for ESP32 #1367 -* merge PR: ETH support for CMT2300A - HMS/HMT #1356 -* full refresh of ePaper after booting #1107 -* add optional custom link #1199 -* pinout has an own subgroup in `/settings` -* grid profile will be displayed as hex in every case #1199 - -## 0.8.57 - 2024-01-15 -* merge PR: fix immediate clearing of display after sunset #1364 -* merge PR: MI-MQTT and last retransmit #1363 -* fixed DTU-ID, now built from the unique part of the MAC -* fix lang in `/system` #1346 -* added protection to prevent update to wrong firmware (environment check) - -## 0.8.56 - 2024-01-15 -* potential fix of update problems and random reboots #1359 #1354 - -## 0.8.55 - 2024-01-14 -* merge PR: fix reboot problem with deactivated power graph #1360 -* changed scope of variables and member functions inside display classes -* removed automatically "minimal" builds -* fix include of "settings.h" (was already done in #1360) -* merge PR: Enhancement: Add info about compiled modules to version string #1357 -* add info about installed binary to `/update` #1353 -* fix lang in `/system` #1346 - -## 0.8.54 - 2024-01-13 -* added minimal version (without: MqTT, Display, History), WebUI is not changed! -* added simulator (must be activated before compile, standard: off) -* changed communication attempts back to 5 - -## 0.8.53 - 2024-01-12 -* fix history graph -* fix MqTT yield day #1331 - -## 0.8.52 - 2024-01-11 -* possible fix of 'division by zero' #1345 -* fix lang #1348 #1346 -* fix timestamp `max AC power` #1324 -* fix stylesheet overlay `max AC power` #1324 -* fix download link #1340 -* fix history graph -* try to fix #1331 - -## 0.8.51 - 2024-01-10 -* fix translation #1346 -* further improve sending active power control command faster #1332 -* added history protection mask -* merge PR: display graph improvements #1347 - -## 0.8.50 - 2024-01-09 -* merge PR: added history charts to web #1336 -* merge PR: small display changes #1339 -* merge PR: MI - add "get loss logic" #1341 -* translated `/history` -* fix translations in title of documents -* added translations for error messages #1343 - -## 0.8.49 - 2024-01-08 -* fix send total values if inverter state is different from `OFF` #1331 -* fix german language issues #1335 - -## 0.8.48 - 2024-01-07 -* merge PR: pin selection for ESP-32 S2 #1334 -* merge PR: enhancement: power graph display option #1330 - -## 0.8.47 - 2024-01-06 -* reduce GxEPD2 lib to compile faster -* upgraded GxEPD2 lib to `1.5.3` -* updated espressif32 platform to `6.5.0` -* updated U8g2 to `2.35.9` -* started to convert deprecated functions of new ArduinoJson `7.0.0` -* started to have german translations of all variants (environments) #925 #1199 -* merge PR: add defines for retry attempts #1329 - -## 0.8.46 - 2024-01-06 -* improved communication - -## 0.8.45 - 2024-01-05 -* fix MqTT total values #1326 -* start implementing a wizard for initial (WiFi) configuration #1199 - -## 0.8.44 - 2024-01-05 -* fix MqTT transmission of data #1326 -* live data is read much earlier / faster and more often #1272 - -## 0.8.43 - 2024-01-04 -* fix display of sunrise in `/system` #1308 -* fix overflow of `getLossRate` calculation #1318 -* improved MqTT by marking sent data and improved `last_success` resends #1319 -* added timestamp for `max ac power` as tooltip #1324 #1123 #1199 -* repaired Power-limit acknowledge #1322 -* fix `max_power` in `/visualization` was set to `0` after sunset - -## 0.8.42 - 2024-01-02 -* add LED to display whether it's night time or not. Can be reused as output to control battery system #1308 -* merge PR: beautifiying typography, added spaces between value and unit for `/visualization` #1314 -* merge PR: Prometheus add `getLossRate` and bugfixing #1315 -* add loss rate to `/visualization` in the statistics window -* corrected `getLossRate` infos for MqTT and prometheus -* added information about working IRQ for NRF24 and CMT2300A to `/system` - -## 0.8.41 - 2024-01-02 -* fix display timeout (OLED) to 60s -* change offs to signed value - -## 0.8.40 - 2024-01-02 -* fix display of sunrise and sunset in `/system` #1308 -* fix MqTT set power limit #1313 - -## 0.8.39 - 2024-01-01 -* fix MqTT dis_night_comm in the morning #1309 #1286 -* separated offset for sunrise and sunset #1308 -* powerlimit (active power control) now has one decimal place (MqTT / API) #1199 -* merge Prometheus metrics fix #1310 -* merge MI grid profile request #1306 -* merge update documentation / readme #1305 -* add `getLossRate` to radio statistics and to MqTT #1199 - -## 0.8.38 - 2023-12-31 -* fix Grid-Profile JSON #1304 - -## 0.8.37 - 2023-12-30 -* added grid profiles -* format version of grid profile - -# RELEASE 0.8.36 - 2023-12-30 - -## 0.8.35 - 2023-12-30 -* added dim option for LEDS -* changed reload time for opendtufusion after update to 5s -* fix default interval and gap for communication -* fix serial number in exported json (was decimal, now correct as hexdecimal number) -* beautified factory reset -* added second stage for erase settings -* increased maximal number of inverters to 32 for opendtufusion board (ESP32-S3) -* fixed crash if CMT inverter is enabled, but CMT isn't configured - -# RELEASE 0.8.34 - 2023-12-29 - -## 0.8.33 - 2023-12-29 -* improved communication thx @rejoe2 - -## 0.8.32 - 2023-12-29 -* fix `start` / `stop` / `restart` commands #1287 -* added message, if profile was not read until now #1300 -* added developer option to use 'syslog-server' instead of 'web-serail' #1299 - -## 0.8.31 - 2023-12-29 -* added class to handle timeouts PR #1298 - -## 0.8.30 - 2023-12-28 -* added info if grid profile was not found -* merge PR #1293 -* merge PR #1295 fix ESP8266 pin settings -* merge PR #1297 fix layout for OLED displays - -## 0.8.29 - 2023-12-27 -* fix MqTT generic topic `comm_disabled` #1265 #1286 -* potential fix of #1285 (reset yield day) -* fix fraction of yield correction #1280 -* fix crash if `getLossRate` was read from inverter #1288 #1290 -* reduce reload time for opendtufusion ethernet variant to 5 seconds -* added basic grid parser -* added ESP32-C3 mini environment #1289 - -## 0.8.28 - 2023-12-23 -* fix bug heuristic -* add version information to clipboard once 'copy' was clicked -* add get loss rate @rejoe2 -* improve communication @rejoe2 - -## 0.8.27 - 2023-12-18 -* fix set power limit #1276 - -## 0.8.26 - 2023-12-17 -* read grid profile as HEX (`live` -> click inverter name -> `show grid profile`) - -## 0.8.25 - 2023-12-17 -* RX channel ID starts with fixed value #1277 -* fix static IP for Ethernet - -## 0.8.24 - 2023-12-16 -* fix NRF communication for opendtufusion ethernet variant - -## 0.8.23 - 2023-12-14 -* heuristics fix #1269 #1270 -* moved `sendInterval` in settings, **important:** *will be reseted to 15s after update to this version* -* try to prevent access to radio classes if they are not activated -* fixed millis in serial log -* changed 'print whole trace' = `false` as default -* added communication loop duration in [ms] to serial console -* don't print Hex-Payload if 'print whole trace' == `false` - -## 0.8.22 - 2023-12-13 -* fix communication state-machine regarding zero export #1267 - -## 0.8.21 - 2023-12-12 -* fix ethernet save inverter parameters #886 -* fix ethernet OTA update #886 -* improved radio statistics, fixed heuristic output for HMS and HMT inverters - -## 0.8.20 - 2023-12-12 -* improved HM communication #1259 #1249 -* fix `loadDefaults` for ethernet builds #1263 -* don't loop through radios which aren't in use #1264 - -## 0.8.19 - 2023-12-11 -* added ms to serial log -* added (debug) option to configure gap between inverter requests - -## 0.8.18 - 2023-12-10 -* copied even more from the original heuristic code #1259 -* added mDNS support #1262 - -## 0.8.17 - 2023-12-10 -* possible fix of NRF with opendtufusion (without ETH) -* small fix in heuristics (if conditions made assignment not comparisson) - -## 0.8.16 - 2023-12-09 -* fix crash if NRF is not enabled -* updated heuristic #1080 #1259 -* fix compile opendtufusion fusion ethernet - -## 0.8.15 - 2023-12-09 -* added support for opendtufusion fusion ethernet shield #886 -* fixed range of HMS / HMT frequencies to 863 to 870 MHz #1238 -* changed `yield effiency` per default to `1.0` #1243 -* small heuristics improvements #1258 -* added class to combine inverter heuristics fields #1258 - -## 0.8.14 - 2023-12-07 -* fixed decimal points for temperature (WebUI) PR #1254 #1251 -* fixed inverter statemachine available state PR #1252 #1253 -* fixed NTP update and sunrise calculation #1240 #886 -* display improvments #1248 #1247 -* fixed overflow in `hmRadio.h` #1244 - -## 0.8.13 - 2023-11-28 -* merge PR #1239 symbolic layout for OLED 128x64 + motion senser functionality -* fix MqTT IP addr for ETH connections PR #1240 -* added ethernet build for fusion board, not tested so far - -## 0.8.12 - 2023-11-20 -* added button `copy to clipboard` to `/serial` - -## 0.8.11 - 2023-11-20 -* improved communication, thx @rejoe2 -* improved heuristics, thx @rejoe2, @Oberfritze -* added option to strip payload of frames to significant area - -## 0.8.10 - 2023-11-19 -* fix Mi and HM inverter communication #1235 -* added privacy mode option #1211 -* changed serial debug option to work without reboot - -## 0.8.9 - 2023-11-19 -* merged PR #1234 -* added new alarm codes -* removed serial interval, was not in use anymore - -## 0.8.8 - 2023-11-16 -* fix ESP8266 save inverter #1232 - -## 0.8.7 - 2023-11-13 -* fix ESP8266 inverter settings #1226 -* send radio statistics via MqTT #1227 -* made night communication inverter depended -* added option to prevent adding values of inverter to total values (MqTT only) #1199 - -## 0.8.6 - 2023-11-12 -* merged PR #1225 -* improved heuristics (prevent update of statitistic during testing) - -## 0.8.5 - 2023-11-12 -* fixed endless loop while switching CMT frequency -* removed obsolete "retries" field from settings #1224 -* fixed crash while defining new invertes #1224 -* fixed default frequency settings -* added default input power to `400` while adding new inverters -* fixed color of wifi RSSI icon #1224 - -## 0.8.4 - 2023-11-10 -* changed MqTT alarm topic, removed retained flag #1212 -* reduce last_success MQTT messages (#1124) -* introduced tabs in WebGUI (inverter settings) -* added inverter-wise power level and frequency - -## 0.8.3 - 2023-11-09 -* fix yield day reset during day #848 -* add total AC Max Power to WebUI -* fix opendtufusion build (GxEPD patch) -* fix null ptr PR #1222 - -## 0.8.2 - 2023-11-08 -* beautified inverter settings in `setup` (preperation for future, settings become more inverter dependent) - -## 0.8.1 - 2023-11-05 -* added tx channel heuristics (per inverter) -* fix statistics counter - -## 0.8.0 - 2023-10-?? -* switched to new communication scheme - -## 0.7.66 - 2023-10-04 -* prepared PA-Level for CMT -* removed settings for number of retransmits, its fixed to `5` now -* added parentheses to have a excactly defined behaviour - -## 0.7.65 - 2023-10-02 -* MI control command review #1197 - -## 0.7.64 - 2023-10-02 -* moved active power control to modal in `live` view (per inverter) by click on current APC state - -## 0.7.63 - 2023-10-01 -* fix NRF24 communication #1200 - -## 0.7.62 - 2023-10-01 -* fix communication to inverters #1198 -* add timeout before payload is tried to process (necessary for HMS/HMT) - -## 0.7.61 - 2023-10-01 -* merged `hmPayload` and `hmsPayload` into single class -* merged generic radio functions into new parent class `radio.h` -* moved radio statistics into the inverter - each inverter has now separate statistics which can be accessed by click on the footer in `/live` -* fix compiler warnings #1191 -* fix ePaper logo during night time #1151 - -## 0.7.60 - 2023-09-27 -* fixed typos in changelog #1172 -* fixed MqTT manual clientId storage #1174 -* fixed inverter name length in setup #1181 -* added inverter name to the header of alarm list #1181 -* improved code to avoid warning during compilation #1182 -* fix scheduler #1188, #1179 - -## 0.7.59 - 2023-09-20 -* re-add another HM-400 hardware serial number accidentally removed with `0.7.45` (#1169) -* merge PR #1170 -* reduce last_success MQTT messages (#1124) -* add re-request if inverter is known to be online and first try fails -* add alarm reporting to MI (might need review!) -* rebuild MI limiting code closer to DTUSimMI example -* round APC in `W` to an integer #1171 - -## 0.7.58 -* fix ESP8266 save settings issue #1166 - -## 0.7.57 - 2023-09-18 -* fix Alarms are always in queue (since 0.7.56) -* fix display active power control to long for small devices #1165 - -## 0.7.56 - 2023-09-17 -* only request alarms which were not received before #1113 -* added flag if alarm was requested but not received and re-request it #1105 -* merge PR #1163 - -## 0.7.55 - 2023-09-17 -* fix prometheus builds -* fix ESP32 default pinout #1159 -* added `opendtufusion-dev` because of annoying `-DARDUINO_USB_CDC_ON_BOOT=1` flag -* fix display of current power on `index` -* fix OTA, was damaged by version `0.7.51`, need to use webinstaller (from `0.7.51` to `0.7.54`) - -## 0.7.54 - 2023-09-16 -* added active power control in `W` to live view #201, #673 -* updated docu, active power control related #706 -* added current AC-Power to `index` page and removed version #763 -* improved statistic data, moved to entire struct -* removed `/api/statistics` endpoint from REST-API - -## 0.7.53 - 2023-09-16 -* fix ePaper / display night behaviour #1151 -* fix ESP8266 compile error - -## 0.7.52 - 2023-09-16 -* fix CMT configurable pins #1150, #1159 -* update MqTT lib to version `1.4.5` - -## 0.7.51 - 2023-09-16 -* fix CMT configurable pins #1150 -* fix default CMT pins for opendtufusion -* beautified `system` -* changed main loops, fix resets #1125, #1135 - -## 0.7.50 - 2023-09-12 -* moved MqTT info to `system` -* added CMT info for ESP32 devices -* improved CMT settings, now `SCLK` and `SDIO` are configurable #1046, #1150 -* changed `Power-Limit` in live-view to `Active Power Control` -* increase length of update file selector #1132 - -## 0.7.49 - 2023-09-11 -* merge PR: symbolic icons for mono displays, PR #1136 -* merge MI code restructuring PR #1145 -* merge Prometheus PR #1148 -* add option to strip webUI for ESP8266 (reduce code size, add ESP32 special features; `IF_ESP32` directives) -* started to get CMT info into `system` - not finished - -## 0.7.48 - 2023-09-10 -* fix SSD1309 2.42" display pinout -* improved setup page: save and delete of inverters - -## 0.7.47 - 2023-09-07 -* fix boot loop #1140 -* fix regex in `setup` page -* fix MI serial number display `max-module-power` in `setup` #1142 -* renamed `opendtufusionv1` to `opendtufusion` - -## 0.7.46 - 2023-09-04 -* removed `delay` from ePaper -* started improvements of `/system` -* fix LEDs to check all configured inverters -* send loop skip disabled inverters fix -* print generated DTU SN to console -* HW Versions for MI series PR #1133 -* 2.42" display (SSD1309) integration PR #1139 -* update user manual PR #1121 -* add / rename alarm codes PR #1118 -* revert default pin ESP32 for NRF23-CE #1132 -* luminance of display can be changed during runtime #1106 - -## 0.7.45 - 2023-08-29 -* change ePaper text to symbols PR #1131 -* added some invertes to dev info list #1111 - -## 0.7.44 - 2023-08-28 -* fix `last_success` transmitted to often #1124 - -## 0.7.43 - 2023-08-28 -* improved RSSI for NRF24, now it's read per package (and inverter) #1129 -* arranged `heap` related info together in `/system` -* fix display navi during save -* clean up binary output, separated to folders - -## 0.7.42 - 2023-08-27 -* fix ePaper for opendtufusion_v2.x boards (Software SPI) -* add signal strength for NRF24 - PR #1119 -* refactor wifi class to support ESP32 S2 PR #1127 -* update platform for ESP32 to 6.3.2 -* fix opendtufusion LED (were mixed) -* fix `last_success` transmitted to often #1124 -* added ESP32-S3-mini to github actions -* added old Changelog Entries, to have full log of changes - -## 0.7.41 - 2023-08-26 -* merge PR #1117 code spelling fixes #1112 -* alarms were not read after the first day - -## 0.7.40 - 2023-08-21 -* added default pins for opendtu-fusion-v1 board -* fixed hw version display in `live` -* removed development builds, renamed environments in `platform.ini` - -## 0.7.39 - 2023-08-21 -* fix background color of invalid inputs -* add hardware info (click in `live` on inverter name) - -## 0.7.38 - 2023-08-21 -* reset alarms at midnight (if inverter is not available) #1105, #1096 -* add option to reset 'max' values on midnight #1102 -* added default pins for CMT2300A (matching OpenDTU) - -## 0.7.37 - 2023-08-18 -* fix alarm time on WebGui #1099 -* added RSSI info for HMS and HMT inverters (MqTT + REST API) - -# RELEASE 0.7.36 - 2023-08-18 - -## 0.7.35 - 2023-08-17 -* fixed timestamp for alarms send over MqTT -* auto-patch of `AsyncWebServer` #834, #1036 -* Update documentation in Git regarding `ESP8266` default NRF24 pin assignments - -## 0.7.34 - 2023-08-16 -* fixed timezone offset of alarms -* added `AC` and `DC` to `/live` #1098 -* changed `ESP8266` default NRF24 pin assignments (`D3` = `CE` and `D4` = `IRQ`) -* fixed background of modal window for bright color -* fix MI crashes -* fix some lost debug messages -* merged PR #1095, MI fixes for 0.7.x versions -* fix scheduled reboot #1097 -* added vector graphic logo `/doc/logo.svg` -* merge PR #1093, improved Nokia5110 display layout - -## 0.7.33 - 2023-08-15 -* add alarms overview to WebGui #608 -* fix webGui total values #1084 - -## 0.7.32 - 2023-08-14 -* fix colors of live view #1091 - -## 0.7.31 - 2023-08-13 -* fixed docu #1085 -* changed active power limit MqTT messages to QOS2 #1072 -* improved alarm messages, added alarm-id to log #1089 -* trigger power limit read on next day (if inverter was offline meanwhile) -* disabled improv implementation to check if it is related to 'Schwuppdizitaet' -* changed live view to gray once inverter isn't available -* added inverter status to API -* changed sum of totals on WebGui depending on inverter status #1084 -* merge maximum power (AC and DC) from PR #1080 - -## 0.7.30 - 2023-08-10 -* attempt to improve speed / response times (Schwuppdizitaet) #1075 - -## 0.7.29 - 2023-08-09 -* MqTT alarm data was never sent, fixed -* REST API: added alarm data -* REST API: made get record obsolete -* REST API: added power limit acknowledge `/api/inverter/id/[0-x]` #1072 - -## 0.7.28 - 2023-08-08 -* fix MI inverter support #1078 - -## 0.7.27 - 2023-08-08 -* added compile option for ethernet #886 -* fix ePaper configuration, missing `Busy`-Pin #1075 - -# RELEASE 0.7.26 - 2023-08-06 - -* fix MqTT `last_success` - -# RELEASE 0.7.25 - 2023-08-06 - -## 0.7.24 - 2023-08-05 -* merge PR #1069 make MqTT client ID configurable -* fix #1016, general MqTT status depending on inverter state machine -* changed icon for fully available inverter to a filled check mark #1070 -* fixed `last_success` update with MqTT #1068 -* removed `improv` esp-web-installer script, because it is not fully functional at this time - -## 0.7.23 - 2023-08-04 -* merge PR #1056, visualization html -* update MqTT library to 1.4.4 -* update RF24 library to 1.4.7 -* update ArduinoJson library to 6.21.3 -* set minimum invervall for `/live` to 5 seconds - -## 0.7.22 - 2023-08-04 -* attempt to fix homeassistant auto discovery #1066 - -## 0.7.21 - 2023-07-30 -* fix MqTT YieldDay Total goes to 0 several times #1016 - -## 0.7.20 - 2023-07-28 -* merge PR #1048 version and hash in API, fixes #1045 -* fix: no yield day update if yield day reads `0` after inverter reboot (mostly on evening) #848 -* try to fix Wifi override #1047 -* added information after NTP sync to WebUI #1040 - -## 0.7.19 - 2023-07-27 -* next attempt to fix yield day for multiple inverters #1016 -* reduced threshold for inverter state machine from 60min to 15min to go from state `WAS_ON` to `OFF` - -## 0.7.18 - 2023-07-26 -* next attempt to fix yield day for multiple inverters #1016 - -## 0.7.17 - 2023-07-25 -* next attempt to fix yield day for multiple inverters #1016 -* added two more states for the inverter status (also docu) - -## 0.7.16 - 2023-07-24 -* next attempt to fix yield day for multiple inverters #1016 -* fix export settings date #1040 -* fix time on WebUI (timezone was not observed) #913 #1016 - -## 0.7.15 - 2023-07-23 -* add NTP sync interval #1019 -* adjusted range of contrast / luminance setting #1041 -* use only ISO time format in Web-UI #913 - -## 0.7.14 - 2023-07-23 -* fix Contrast for Nokia Display #1041 -* attempt to fix #1016 by improving inverter status -* added option to adjust efficiency for yield (day/total) #1028 - -## 0.7.13 - 2023-07-19 -* merged display PR #1027 -* add date, time and version to export json #1024 - -## 0.7.12 - 2023-07-09 -* added inverter status - state-machine #1016 - -## 0.7.11 - 2023-07-09 -* fix MqTT endless loop #1013 - -## 0.7.10 - 2023-07-08 -* fix MqTT endless loop #1013 - -## 0.7.9 - 2023-07-08 -* added 'improve' functions to set wifi password directly with ESP web tools #1014 -* fixed MqTT publish while applying power limit #1013 -* slightly improved HMT live view (Voltage & Current) - -## 0.7.8 - 2023-07-05 -* fix `YieldDay`, `YieldTotal` and `P_AC` in `TotalValues` #929 -* fix some serial debug prints -* merge PR #1005 which fixes issue #889 -* merge homeassistant PR #963 -* merge PR #890 which gives option for scheduled reboot at midnight (default off) - -## 0.7.7 - 2023-07-03 -* attempt to fix MqTT `YieldDay` in `TotalValues` #927 -* attempt to fix MqTT `YieldDay` and `YieldTotal` even if inverters are not completely available #929 -* fix wrong message 'NRF not connected' if it is disabled #1007 - -## 0.7.6 - 2023-06-17 -* fix display of hidden SSID checkbox -* changed yield correction data type to `double`, now decimal places are supported -* corrected name of 0.91" display in settings -* attempt to fix MqTT zero values only if setting is there #980, #957 -* made AP password configurable #951 -* added option to start without time-sync, eg. for AP-only-mode #951 - -## 0.7.5 - 2023-06-16 -* fix yield day reset on midnight #957 -* improved tickers in `app.cpp` - -## 0.7.4 - 2023-06-15 -* fix MqTT `P_AC` send if inverters are available #987 -* fix assignments for HMS 1CH and 2CH devices -* fixed uptime overflow #990 - -## 0.7.3 - 2023-06-09 -* fix hidden SSID scan #983 -* improved NRF24 missing message on home screen #981 -* fix MqTT publishing only updated values #982 - -## 0.7.2 - 2023-06-08 -* fix HMS-800 and HMS-1000 assignments #981 -* make nrf enabled all the time for ESP8266 -* fix menu item `active` highlight for 'API' and 'Doku' -* fix MqTT totals issue #927, #980 -* reduce maximum number of inverters to 4 for ESP8266, increase to 16 for ESP32 - -## 0.7.1 - 2023-06-05 -* enabled power limit control for HMS / HMT devices -* changed NRF24 lib version back to 1.4.5 because of compile problems for EPS8266 - -## 0.7.0 - 2023-06-04 -* HMS / HMT support for ESP32 devices - -## 0.6.15 - 2023-05-25 -* improved Prometheus Endpoint PR #958 -* fix turn off ePaper only if setting was set #956 -* improved reset values and update MqTT #957 - -## 0.6.14 - 2023-05-21 -* merge PR #902 Mono-Display - -## 0.6.13 - 2023-05-16 -* merge PR #934 (fix JSON API) and #944 (update manual) - -## 0.6.12 - 2023-04-28 -* improved MqTT -* fix menu active item - -## 0.6.11 - 2023-04-27 -* added MqTT class for publishing all values in Arduino `loop` - -## 0.6.10 - HMS -* Version available in `HMS` branch - -# RELEASE 0.6.9 - 2023-04-19 - -## 0.6.8 - 2023-04-19 -* fix #892 `zeroYieldDay` loop was not applied to all channels - -## 0.6.7 - 2023-04-13 -* merge PR #883, improved store of settings and javascript, thx @tastendruecker123 -* support `.` and `,` as floating point separator in setup #881 - -## 0.6.6 - 2023-04-12 -* increased distance for `import` button in mobile view #879 -* changed `led_high_active` to `bool` #879 - -## 0.6.5 - 2023-04-11 -* fix #845 MqTT subscription for `ctrl/power/[IV-ID]` was missing -* merge PR #876, check JSON settings during read for existence -* **NOTE:** incompatible change: renamed `led_high_active` to `act_high`, maybe setting must be changed after update -* merge PR #861 do not send channel metric if channel is disabled - -## 0.6.4 - 2023-04-06 -* merge PR #846, improved NRF24 communication and MI, thx @beegee3 & @rejoe2 -* merge PR #859, fix burger menu height, thx @ThomasPohl - -## 0.6.3 - 2023-04-04 -* fix login, password length was not checked #852 -* merge PR #854 optimize browser caching, thx @tastendruecker123 #828 -* fix WiFi reconnect not working #851 -* updated issue templates #822 - -## 0.6.2 - 2023-04-04 -* fix login from multiple clients #819 -* fix login screen on small displays - -## 0.6.1 - 2023-04-01 -* merge LED fix - LED1 shows MqTT state, LED configurable active high/low #839 -* only publish new inverter data #826 -* potential fix of WiFi hostname during boot up #752 - -# RELEASE 0.6.0 - 2023-03-27 - -## 0.5.110 -* MQTT fix reconnection by new lib version #780 -* add `about` page -* improved documentation regarding SPI pins #814 -* improved documentation (getting started) #815 #816 -* improved MI 4-ch inverter #820 - -## 0.5.109 -* reduced heap fragmentation by optimizing MqTT #768 -* ePaper: centered text thx @knickohr - -## 0.5.108 -* merge: PR SPI pins configurable (ESP32) #807, #806 (requires manual set of MISO=19, MOSI=23, SCLK=18 in GUI for existing installs) -* merge: PR MI serial outputs #809 -* fix: no MQTT `total` sensor for autodiscover if only one inverter was found #805 -* fix: MQTT `total` renamed to `device_name` + `_TOTOL` for better visibility #805 - -## 0.5.107 -* fix: show save message -* fix: removed serial newline for `enqueueCmd` -* Merged improved Prometheus #808 - -## 0.5.106 -* merged MI and debug message changes #804 -* fixed MQTT autodiscover #794, #632 - -## 0.5.105 -* merged MI, thx @rejoe2 #788 -* fixed reboot message #793 - -## 0.5.104 -* further improved save settings -* removed `#` character from ePaper -* fixed saving pinout for `Nokia-Display` -* removed `Reset` Pin for monochrome displays -* improved wifi connection #652 - -## 0.5.103 -* merged MI improvements, thx @rejoe2 #778 -* changed display inverter online message -* merged heap improvements #772 - -## 0.5.102 -* Warning: old exports are not compatible any more! -* fix JSON import #775 -* fix save settings, at least already stored settings are not lost #771 -* further save settings improvements (only store inverters which are existing) -* improved display of settings save return value -* made save settings asynchronous (more heap memory is free) - -## 0.5.101 -* fix SSD1306 -* update documentation -* Update miPayload.h -* Update README.md -* MI - remarks to user manual -* MI - fix AC calc -* MI - fix status msg. analysis - -## 0.5.100 -* fix add inverter `setup.html` #766 -* fix MQTT retained flag for total values #726 -* renamed buttons for import and export `setup.html` -* added serial message `settings saved` - -## 0.5.99 -* fix limit in [User_Manual.md](../User_Manual.md) -* changed `contrast` to `luminance` in `setup.html` -* try to fix SSD1306 display #759 -* only show necessary display pins depending on setting - -## 0.5.98 -* fix SH1106 rotation and turn off during night #756 -* removed MQTT subscription `sync_ntp`, `set_time` with a value of `0` does the same #696 -* simplified MQTT subscription for `limit`. Check [User_Manual.md](../User_Manual.md) for new syntax #696, #713 -* repaired inverter wise limit control -* fix upload settings #686 - -## 0.5.97 -* Attention: re-ordered display types, check your settings! #746 -* improved saving settings of display #747, #746 -* disabled contrast for Nokia display #746 -* added Prometheus as compile option #719, #615 -* update MQTT lib to v1.4.1 -* limit decimal places to 2 in `live` -* added `-DPIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48` to esp8266 debug build #657 -* a `max-module-power` of `0` disables channel in live view `setup` -* merge MI improvements, get firmware information #753 - -## 0.5.96 -* added Nokia display again for ESP8266 #764 -* changed `var` / `VAr` to SI unit `var` #732 -* fix MQTT retained flags for totals (P_AC, P_DC) #726, #721 - -## 0.5.95 -* merged #742 MI Improvements -* merged #736 remove obsolete JSON Endpoint - -## 0.5.94 -* added ePaper (for ESP32 only!), thx @dAjaY85 #735 -* improved `/live` margins #732 -* renamed `var` to `VAr` #732 - -## 0.5.93 -* improved web API for `live` -* added dark mode option -* converted all forms to reponsive design -* repaired menu with password protection #720, #716, #709 -* merged MI series fixes #729 - -## 0.5.92 -* fix mobile menu -* fix inverters in select `serial.html` #709 - -## 0.5.91 -* improved html and navi, navi is visible even when API dies #660 -* reduced maximum allowed JSON size for API to 6000Bytes #660 -* small fix: output command at `prepareDevInformCmd` #692 -* improved inverter handling #671 - -## 0.5.90 -* merged PR #684, #698, #705 -* webserial minor overflow fix #660 -* web `index.html` improve version information #701 -* fix MQTT sets power limit to zero (0) #692 -* changed `reset at midnight` with timezone #697 - -## 0.5.89 -* reduced heap fragmentation (removed `strtok` completely) #644, #645, #682 -* added part of mac address to MQTT client ID to separate multiple ESPs in same network -* added dictionary for MQTT to reduce heap-fragmentation -* removed `last Alarm` from Live view, because it showed always the same alarm - will change in future - -## 0.5.88 -* MQTT Yield Day zero, next try to fix #671, thx @beegee3 -* added Solenso inverter to supported devices -* improved reconnection of MQTT #650 - -## 0.5.87 -* fix yield total correction as module (inverter input) value #570 -* reneabled instant start communication (once NTP is synced) #674 - -## 0.5.86 -* prevent send devcontrol request during disabled night communication -* changed yield total correction as module (inverter input) value #570 -* MQTT Yield Day zero, next try to fix #671 - -## 0.5.85 -* fix power-limit was not checked for max retransmits #667 -* fix blue LED lights up all the time #672 -* fix installing schedulers if NTP server isn't available -* improved zero values on triggers #671 -* hardcoded MQTT subtopics, because wildcard `#` leads to errors -* rephrased some messages on webif, thx to @Argafal #638 -* fixed 'polling stop message' on `index.html` #639 - -## 0.5.84 -* fix blue LED lights up all the time #672 -* added an instant start communication (once NTP is synced) -* add MI 3rd generation inverters (10x2 serial numbers) -* first decodings of messages from MI 2nd generation inverters - -## 0.5.83 -* fix MQTT publishing, `callback` was set but reset by following `setup()` - -## 0.5.82 -* fixed communication error #652 -* reset values is no bound to MQTT any more, setting moved to `inverter` #649 -* fixed wording on `index.hmtl` #661 - -## 0.5.81 -* started implementation of MI inverters (setup.html, own processing `MiPayload.h`) - -## 0.5.80 -* fixed communication #656 - -## 0.5.79 -* fixed mixed reset flags #648 -* fixed `mCbAlarm` if MQTT is not used #653 -* fixed MQTT `autodiscover` #630 thanks to @antibill51 -* next changes from @beegee many thanks for your contribution! -* replaced `CircularBuffer` by `std::queue` -* reworked `hmRadio.h` completely (interrupts, packaging) -* fix exception while `reboot` -* cleanup MQTT coding - -## 0.5.78 -* further improvements regarding wifi #611, fix connection if only one AP with same SSID is there -* fix endless loop in `zerovalues` #564 -* fix auto discover again #565 -* added total values to autodiscover #630 -* improved zero at midnight #625 - -## 0.5.77 -* fix wrong filename for automatically created manifest (online installer) #620 -* added rotate display feature #619 -* improved Prometheus endpoint #615, thx to @fsck-block -* improved wifi to connect always to strongest RSSI, thx to @beegee3 #611 - -## 0.5.76 -* reduce MQTT retry interval from maximum speed to one second -* fixed homeassistant autodiscovery #565 -* implemented `getNTPTime` improvements #609 partially #611 -* added alarm messages to MQTT #177, #600, #608 - -## 0.5.75 -* fix wakeup issue, once wifi was lost during night the communication didn't start in the morning -* re-enabled FlashStringHelper because of lacking RAM -* complete rewrite of monochrome display class, thx to @dAjaY85 -> displays are now configurable in setup -* fix power limit not possible #607 - -## 0.5.74 -* improved payload handling (retransmit all fragments on CRC error) -* improved `isAvailable`, checks all record structs, inverter becomes available more early because version is check first -* fix tickers were not set if NTP is not available -* disabled annoying `FlashStringHelper` it gives randomly Exceptions during development, feels more stable since then -* moved erase button to the bottom in settings, not nice but more functional -* split `tx_count` to `tx_cnt` and `retransmits` in `system.html` -* fix mqtt retransmit IP address #602 -* added debug infos for `scheduler` (web -> `/debug` as trigger prints list of tickers to serial console) - -## 0.5.73 -* improved payload handling (request / retransmit) #464 -* included alarm ID parse to serial console (in development) - -## 0.5.72 -* repaired system, scheduler was not called any more #596 - -## 0.5.71 -* improved wifi handling and tickers, many thanks to @beegee3 #571 -* fixed YieldTotal correction calculation #589 -* fixed serial output of power limit acknowledge #569 -* reviewed `sendDiscoveryConfig` #565 -* merged PR `Monodisplay`, many thanks to @dAjaY85 #566, Note: (settings are introduced but not able to be modified, will be included in next version) - -## 0.5.70 -* corrected MQTT `comm_disabled` #529 -* fix Prometheus and JSON endpoints (`config_override.h`) #561 -* publish MQTT with fixed interval even if inverter is not available #542 -* added JSON settings upload. NOTE: settings JSON download changed, so only settings should be uploaded starting from version `0.5.70` #551 -* MQTT topic and inverter name have more allowed characters: `[A-Za-z0-9./#$%&=+_-]+`, thx: @Mo Demman -* improved potential issue with `checkTicker`, thx @cbscpe -* MQTT option for reset values on midnight / not avail / communication stop #539 -* small fix in `tickIVCommunication` #534 -* add `YieldTotal` correction, eg. to have the option to zero at year start #512 - -## 0.5.69 -* merged SH1106 1.3" Display, thx @dAjaY85 -* added SH1106 to automatic build -* added IP address to MQTT (version, device and IP are retained and only transmitted once after boot) #556 -* added `set_power_limit` acknowledge MQTT publish #553 -* changed: version, device name are only published via MQTT once after boot -* added `Login` to menu if admin password is set #554 -* added `development` to second changelog link in `index.html` #543 -* added interval for MQTT (as option). With this settings MQTT live data is published in a fixed timing (only if inverter is available) #542, #523 -* added MQTT `comm_disabled` #529 -* changed name of binaries, moved GIT-Sha to the front #538 - -## 0.5.68 -* repaired receive payload -* Powerlimit is transferred immediately to inverter - -## 0.5.67 -* changed calculation of start / stop communication to 1 min after last comm. stop #515 -* moved payload send to `payload.h`, function `ivSend` #515 -* payload: if last frame is missing, request all frames again - -# RELEASE 0.5.66 - 2022-12-30 - -## 0.5.65 -* wifi, code optimization #509 - -## 0.5.64 -* channel name can use any character, not limited any more -* added `/` to MQTT topic and Inverter name -* trigger for `calcSunrise` is now using local time #515 -* fix reconnect timeout for WiFi #509 -* start AP only after boot, not on WiFi connection loss -* improved /system `free_heap` value (measured before JSON-tree is built) - -## 0.5.63 -* fix Update button protection (prevent double click #527) -* optimized scheduler #515 (thx @beegee3) -* potential fix of #526 duplicates in API `/api/record/live` -* added update information to `index.html` - -## 0.5.62 -* fix MQTT `status` update -* removed MQTT `available_text` (can be deducted from `available`) -* enhanced MQTT documentation in `User_Manual.md` -* removed `tickSunset` and `tickSunrise` from MQTT. It's not needed any more because of minute wise check of status (`processIvStatus`) -* changed MQTT topic `status` to nummeric value, check documentation in `User_Manual.md` -* fix regular expression of `setup.html` for inverter name and channel name - -## 0.5.61 -* fix #521 no reconnect at beginning of day -* added immediate (each minute) report of inverter status MQTT #522 -* added protection mask to select which pages should be protected -* update of monochrome display, show values also if nothing changed - -## 0.5.60 -* added regex to inverter name and MQTT topic (setup.html) -* beautified serial.html -* added ticker for wifi loop #515 - -## 0.5.59 -* fix night communication enable -* improved different WiFi connection scenarios (STA WiFi not found, reconnect #509, redirect for AP to configuration) -* increased MQTT user, pwd and topic length to 64 characters + `\0`. (The string end `\0` reduces the available size by one) #516 - -## 0.5.58 -* improved stability -* improved WiFi initial connection - especially if station WiFi is not available -* removed new operators from web.h (reduce dynamic allocation) -* improved sun calculation #515, #505 -* fixed WiFi auto reconnect #509 -* added disable night communication flag to MQTT #505 -* changed MQTT publish of `available` and `available_text` to sunset #468 - -## 0.5.57 -* improved stability -* added icons to index.html, added WiFi-strength symbol on each page -* moved packet stats and sun to system.html -* refactored communication offset (adjustable in minutes now) - -## 0.5.56 -* factory reset formats entire little fs -* renamed sunrise / sunset on index.html to start / stop communication -* show system information only if called directly from menu -* beautified system.html - -## 0.5.55 -* fixed static IP save - -## 0.5.54 -* changed sunrise / sunset calculation, angle is now `-3.5` instead of original `-0.83` -* improved scheduler (removed -1 from `reload`) #483 -* improved reboot flag in `app.h` -* fixed #493 no MQTT payload once display is defined - -## 0.5.53 -* Mono-Display: show values in offline mode #498 -* improved WiFi class #483 -* added communication enable / disable (to test multiple DTUs with the same inverter) -* fix factory reset #495 - -## 0.5.52 -* improved ahoyWifi class -* added interface class for app -* refactored web and webApi -> RestApi -* fix calcSunrise was not called every day -* added MQTT RX counter to index.html -* all values are displayed on /live even if they are 0 -* added MQTT /status to show status over all inverters - -## 0.5.51 -* improved scheduler, @beegee3 #483 -* refactored get NTP time, @beegee3 #483 -* generate `bin.gz` only for 1M device ESP8285 -* fix calcSunrise was not called every day -* increased number of allowed characters for MQTT user, broker and password, @DanielR92 -* added NRF24 info to Systeminfo, @DanielR92 -* added timezone for monochrome displays, @gh-fx2 -* added support for second inverter for monochrome displays, @gh-fx2 - -## 0.5.50 -* fixed scheduler, uptime and timestamp counted too fast -* added / renamed automatically build outputs -* fixed MQTT ESP uptime on reconnect (not zero any more) -* changed uptime on index.html to count each second, synced with ESP each 10 seconds - -## 0.5.49 -* fixed AP mode on brand new ESP modules -* fixed `last_success` MQTT message -* fixed MQTT inverter available status at sunset -* reordered enqueue commands after boot up to prevent same payload length for successive commands -* added automatic build for Nokia5110 and SSD1306 displays (ESP8266) - -## 0.5.48 -* added MQTT message send at sunset -* added monochrome display support -* added `once` and `onceAt` to scheduler to make code cleaner -* improved sunrise / sunset calculation - -## 0.5.47 -* refactored ahoyWifi class: AP is opened on every boot, once station connection is successful the AP will be closed -* improved NTP sync after boot, faster sync -* fix NRF24 details only on valid SPI connection - -## 0.5.46 -* fix sunrise / sunset calculation -* improved setup.html: `reboot on save` is checked as default - -## 0.5.45 -* changed MQTT last will topic from `status` to `mqtt` -* fix sunrise / sunset calculation -* fix time of serial web console - -## 0.5.44 -* marked some MQTT messages as retained -* moved global functions to global location (no duplicates) -* changed index.html interval to static 10 seconds -* fix static IP -* fix NTP with static IP -* print MQTT info only if MQTT was configured - -## 0.5.43 -* updated REST API and MQTT (both of them use the same functionality) -* added ESP-heap information as MQTT message -* changed output name of automatic development build to fixed name (to have a static link from https://ahoydtu.de) -* updated user manual to latest MQTT and API changes - -## 0.5.42 -* fix web logout (auto logout) -* switched MQTT library - -# RELEASE 0.5.41 - 2022-11-22 - -# RELEASE 0.5.28 - 2022-10-30 - -# RELEASE 0.5.17 - 2022-09-06 - -# RELEASE 0.5.16 - 2022-09-04 - +full version log: [Development Log](https://github.com/lumapu/ahoy/blob/development03/src/CHANGES.md) diff --git a/src/defines.h b/src/defines.h index 7d6c82fc..94674315 100644 --- a/src/defines.h +++ b/src/defines.h @@ -13,7 +13,7 @@ //------------------------------------- #define VERSION_MAJOR 0 #define VERSION_MINOR 8 -#define VERSION_PATCH 139 +#define VERSION_PATCH 140 //------------------------------------- typedef struct { uint8_t ch;