Couldn't map cluster keyspace using any provided seed (REDIS Cluster) #37991
Comments
|
Hi there, Thanks for reporting but it looks like this is a question which can be asked on a support channel. Please only use this issue tracker for reporting bugs with the library itself. If you have a question on how to use functionality provided by this repo you can try one of the following channels: However, this issue will not be locked and everyone is still free to discuss solutions to your problem! Thanks. |
|
@driesvints I already check all those channels, but not lucky to found help. |
|
Hi @fhferreira, |
|
I've found one configuration to use AWS ElastiCache with Cluster mode active. <?php
use Illuminate\Support\Str;
return [
/*
|--------------------------------------------------------------------------
| Default Database Connection Name
|--------------------------------------------------------------------------
|
| Here you may specify which of the database connections below you wish
| to use as your default connection for all database work. Of course
| you may use many connections at once using the Database library.
|
*/
'default' => env('DB_CONNECTION', 'mysql'),
/*
|--------------------------------------------------------------------------
| Database Connections
|--------------------------------------------------------------------------
|
| Here are each of the database connections setup for your application.
| Of course, examples of configuring each database platform that is
| supported by Laravel is shown below to make development simple.
|
|
| All database work in Laravel is done through the PHP PDO facilities
| so make sure you have the driver for your particular database of
| choice installed on your machine before you begin development.
|
*/
'connections' => [
'sqlite' => [
'driver' => 'sqlite',
'url' => env('DATABASE_URL'),
'database' => env('DB_DATABASE', database_path('database.sqlite')),
'prefix' => '',
'foreign_key_constraints' => env('DB_FOREIGN_KEYS', true),
],
'sqlite_testing' => [
'driver' => 'sqlite',
'database' => ':memory:',
'prefix' => '',
],
'mysql' => [
'driver' => 'mysql',
'url' => env('DATABASE_URL'),
'read' => [
'host' => [
env('DB_HOST_READONLY', env('DB_HOST', '127.0.0.1')),
],
'database' => env('DB_DATABASE', 'forge'),
'username' => env('DB_USERNAME', 'root'),
'password' => env('DB_PASSWORD', ''),
],
'write' => [
'host' => [
env('DB_HOST', '127.0.0.1'),
],
'database' => env('DB_DATABASE', 'forge'),
'username' => env('DB_USERNAME', 'root'),
'password' => env('DB_PASSWORD', ''),
],
/*
If you see “sticky” word there, if enabled, any "write" query operation performed against the database
during the current request cycle, any further "read" operations will use the "write" connection.
This ensures that any data written during the request cycle can be immediately read back from the database
during that same request. I recommended you to enable the sticky option
*/
'sticky' => true,
//'host' => env('DB_HOST', '127.0.0.1'),
'port' => env('DB_PORT', '3306'),
'database' => env('DB_DATABASE', 'forge'),
'username' => env('DB_USERNAME', 'forge'),
'password' => env('DB_PASSWORD', 'secret'),
'unix_socket' => env('DB_SOCKET', ''),
'charset' => 'utf8mb4',
'collation' => 'utf8mb4_unicode_ci',
'prefix' => '',
'prefix_indexes' => true,
'strict' => false,
'engine' => null,
'options' => extension_loaded('pdo_mysql') ? array_filter([
PDO::MYSQL_ATTR_SSL_CA => env('MYSQL_ATTR_SSL_CA'),
]) : [],
],
'pgsql' => [
'driver' => 'pgsql',
'url' => env('DATABASE_URL'),
'host' => env('DB_HOST', '127.0.0.1'),
'port' => env('DB_PORT', '5432'),
'database' => env('DB_DATABASE', 'forge'),
'username' => env('DB_USERNAME', 'forge'),
'password' => env('DB_PASSWORD', ''),
'charset' => 'utf8',
'prefix' => '',
'prefix_indexes' => true,
'schema' => 'public',
'sslmode' => 'prefer',
],
'sqlsrv' => [
'driver' => 'sqlsrv',
'url' => env('DATABASE_URL'),
'host' => env('DB_HOST', 'localhost'),
'port' => env('DB_PORT', '1433'),
'database' => env('DB_DATABASE', 'forge'),
'username' => env('DB_USERNAME', 'forge'),
'password' => env('DB_PASSWORD', ''),
'charset' => 'utf8',
'prefix' => '',
'prefix_indexes' => true,
]
],
/*
|--------------------------------------------------------------------------
| Migration Repository Table
|--------------------------------------------------------------------------
|
| This table keeps track of all the migrations that have already run for
| your application. Using this information, we can determine which of
| the migrations on disk haven't actually been run in the database.
|
*/
'migrations' => 'migrations',
/*
|--------------------------------------------------------------------------
| Redis Databases
|--------------------------------------------------------------------------
|
| Redis is an open source, fast, and advanced key-value store that also
| provides a richer body of commands than a typical key-value system
| such as APC or Memcached. Laravel makes it easy to dig right in.
|
*/
'redis' => [
'cluster' => true,
'client' => env('REDIS_CLIENT', 'phpredis'),
'options' => [
'cluster' => env('REDIS_CLUSTER', 'redis'),
'prefix' => env('REDIS_PREFIX', Str::slug(env('APP_NAME', 'laravel'), '_') . '_database_'),
'replication' => true,
'parameters' => [
// Parameters provide defaults for the Connection Factory
'password' => env('REDIS_PASSWORD', null), // Redirects need PW for the other nodes
'scheme' => env('REDIS_SCHEME', 'tcp'), // Redirects also must match scheme
],
'persistent' => true,
'ssl' => ['verify_peer' => false], // Since we dont have TLS cert to verify
],
'default' => [
'host' => env('REDIS_HOST', '127.0.0.1'),
'password' => env('REDIS_PASSWORD', null),
'port' => env('REDIS_PORT', 6379),
'database' => env('REDIS_DB', 0),
'persistent' => true,
],
'clusters' => [
'default' => [
[
'persistent' => true,
'scheme' => env('REDIS_SCHEME', 'tcp'),
'host' => env('REDIS_HOST', 'localhost'),
'password' => env('REDIS_PASSWORD', null),
'port' => env('REDIS_PORT', 6379),
'database' => env('REDIS_CACHE_DB', 0),
'read_write_timeout' => 30,
],
],
'cache' => [
[
'persistent' => true,
'scheme' => env('REDIS_SCHEME', 'tcp'),
'host' => env('REDIS_HOST_CACHE', '127.0.0.1'),
'password' => env('REDIS_PASSWORD', null),
'port' => env('REDIS_PORT', 6379),
'database' => env('REDIS_CACHE_DB', 0),
'read_write_timeout' => 30,
]
],
'session' => [
[
'persistent' => true,
'scheme' => env('REDIS_SCHEME', 'tcp'),
'host' => env('REDIS_HOST', '127.0.0.1'),
'password' => env('REDIS_PASSWORD', null),
'port' => env('REDIS_PORT', 6379),
'database' => env('REDIS_CACHE_DB', 0),
'read_write_timeout' => 30,
]
],
'options' =>[
'cluster' =>'redis',
'replication' => true,
'persistent' => true,
]
],
],
]; |
|
Hello, Something I do not understand : do my Redis needs to be setup and configured in cluster mode on server side ? Or can PHPRedis do all the job from client side ? Thanks for help |
|
Hello! Have the same problem. This configuration doesn't work, pity |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
File config/database.php
The text was updated successfully, but these errors were encountered: