EMS-ESP is an open-source firmware for the Espressif ESP8266 and ESP32 microcontroller that communicates with EMS (Energy Management System) based equipment from manufacturers like Bosch, Buderus, Nefit, Junkers, Worcester and Sieger.
This project is the specifically for the ESP32. Compared with the previous ESP8266 (version 2) release it has the following enhancements:
- Ethernet Support
- Pre-configured circuit board layouts
- Supports writing EMS values directly from within Web UI
- Mock API server for faster offline development and testing
- Improved API and MQTT commands
- Improvements to Dallas temperature sensors
- Embedded log tracing in the Web UI
If you like EMS-ESP, please give it a star, or fork it and contribute!
Note, EMS-ESP requires a small hardware circuit that can convert the EMS bus data to be read by the microcontroller. These can be ordered at https://bbqkees-electronics.nl or contact the contributors that can provide the schematic and designs.
- A multi-user secure web interface to change settings and monitor incoming data
- A console, accessible via Serial and Telnet for more advanced monitoring
- Native support for Home Assistant and Domoticz via MQTT Discovery
- Can run standalone as an independent WiFi Access Point or join an existing WiFi network
- Easy first-time configuration via a web Captive Portal
- Support for more than 100 EMS devices (boilers, thermostats, solar modules, mixer modules, heat pumps, gateways)
See a demo here. Log in with any username/password.
 |
 |
 |
 |
 |
 |
Refer to the official documentation to how to install the firmware and configure it. The documentation is being constantly updated as new features and settings are added.
You can choose to use an pre-built firmware image or compile the code yourself:
If you're looking for support on EMS-ESP there are some options available:
- Official EMS-ESP Documentation: For information on how to build and upload the firmware
- FAQ and Troubleshooting: For information on common problems and solutions. See also BBQKees's wiki
- Discord Server: For support, troubleshooting and general questions. You have better chances to get fast answers from members of the community
- Search in Issues: You might find an answer to your question by searching current or closed issues
- Bug Report: For reporting Bugs
- Feature Request: For requesting features/functions
- Troubleshooting: As a last resort, you can open new Troubleshooting & Question issue on GitHub if the solution could not be found using the other channels. Just remember: the more info you provide the more chances you'll have to get an accurate answer
EMS-ESP is a project originally created and owned by proddy. Key contributors are:
 MichaelDvP v2 v3 |
You can also contribute to EMS-ESP by
- providing Pull Requests (Features, Fixes, suggestions)
- testing new released features and report issues on your EMS equipment
- contributing to missing Documentation
- esp8266-react by @rjwats for the framework that provides the core of the Web UI
- uuid-* from @nomis. The console, syslog, telnet and logging are based off these open source libraries
- ArduinoJson for JSON
- AsyncMqttClient for the MQTT client, with custom modifications from @bertmelis and @proddy
- ESPAsyncWebServer and AsyncTCP for the Web server and TCP backends, with custom modifications for performance
This program is licensed under GPL-3.0