Skip to content

Latest commit

 

History

History
131 lines (113 loc) · 4.47 KB

README.md

File metadata and controls

131 lines (113 loc) · 4.47 KB
Raw

NK2Reshift

This is an Ableton Live control surface script for the Korg nanoKONTROL2.

It's a replica of dynamiiic's excellent NanoKontrol2Shift. It uses more recent Live APIs to provide some usability benefits, for example:

  • more consistent LED behavior, for example when changing modes or working with the clip matrix.
  • blinking LEDs to represent playing/triggered clips.
  • device identification, so the session ring ("red box") is only visible when the nanoKONTROL2 is actually connected.

This script supports Live 11 and 12. Earlier versions of Live are not supported.

Usage

Usage is the same as NanoKontrol2Shfit:

It loads in a default or initial mode and there are 3 modes buttons:

  • STOP: Shift Mode
  • PLAY: Alt Mode
  • RECORD: Ctrl Mode Press one of them to enter that mode, pressing again will deactivate it and return to the initial mode. If you have one mode active and press other mode button, simply it deactivates the first and activates the second.

OVERVIEW ON MODES:

DEFAULT MODE:

  • Track Nav - Session left/right
  • Rewind, Forward - Session up/down
  • Marker Left, Right - Send up/down
  • Cycle, Set Marker - Does nothing
  • Faders - Session tracks volume
  • Knobs - Session tracks send A (Assignable with marker left/right to the other sends)
  • Solo, Arm, Mute - Session Clip Launch Matrix 8x3

SHIFT MODE:

  • Track Nav - Same as in default mode
  • Rewind, Forward - Same as in default mode
  • Marker Left, Right - Same as in default mode
  • Cycle, Set Marker - Does nothing
  • Faders - Same as in default mode
  • Knobs - Same as in default mode
  • Solo, Arm, Mute - Solo, Arm and Mute for the Session controlled tracks

ALT MODE:

  • Track Nav - Same as in default mode
  • Rewind, Forward - Same as in default mode
  • Marker Left, Right - Same as in default mode
  • Cycle, Set Marker - Does nothing
  • Faders - Same as in default mode
  • Knobs - Same as in default mode
  • Solo - Resets the value of the current send for the Session controlled tracks
  • Mute - Select track for the Session controlled tracks
  • Arm - Stop button for the Session controlled tracks

CTRL MODE:

  • Track Nav - Same as in default mode
  • Rewind, Forward - Same as in default mode
  • Marker Left, Right - Device left/right
  • Cycle - Device turn on/off
  • Set Marker - Device lock/unlock
  • Faders - Same as in default mode
  • Knobs - Controls 8 knobs on a selected device
  • Solo - Clip/Device view for the Session controlled tracks
  • Mute - The 3 first Mute buttons are assigned to the 3 scene launch, the rest unassigned (Ideas are welcome)
  • Arm 1 - Stop
  • Arm 2 - Play
  • Arm 3 - Record
  • Arm 4 - Global Quantization
  • Arm 5 - Tempo Down
  • Arm 6 - Tempo Up
  • Arm 7 - Metronome
  • Arm 8 - Stop All Clips

Installation

  • Download or clone this repository and place it under Remote Scripts in your Live User Library. If you download it directly, change the folder name from NK2Reshift-main to NK2Reshift (or anything without a hyphen).
  • Start or restart Live.
  • In the Live settings dialog under Link/Tempo/MIDI, choose NK2Reshift as one of your control surfaces.
  • Make sure your nanoKONTROL2 device is plugged in, and select the nanoKONTROL2 ports for the control surface input/output.

Configuration

To configure the nanoKONTROL2 for use with this script, hold the SET and STOP buttons while plugging it in. This is the setup for Live integration recommended in the nanoKONTROL2 manual (so it also works with the built-in MackieControl control surface script).

Note that this default configuration is not the same as the one expected by the original NanoKontrol2Shift. If you want to use the NanoKontrol2Shift configuration instead, create a file called user.py in this directory, containing:

# user.py
from .configuration import NanoKontrol2ShiftConfiguration

configuration = NanoKontrol2ShiftConfiguration()

Alternatively, you can provide a custom mapping by exporting any configuration from user.py, for example:

# user.py
from .configuration import cc_button, Configuration

configuration = Configuration(
    track_left_button=cc_button(50),
    track_right_button=cc_button(51),
    # ...
)

See configuration.py for more details and the full list of settings.