From d6f71922fd185c817d233758a7d1bba8ac803718 Mon Sep 17 00:00:00 2001 From: Michael Stapelberg Date: Wed, 2 Sep 2020 17:32:10 +0200 Subject: [PATCH] README: clarify solder instruction regarding vertical pin header related to https://github.com/kinx-project/kint/issues/13 --- README.md | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index fd9549f..0f2a1d8 100644 --- a/README.md +++ b/README.md @@ -207,9 +207,13 @@ the same time :-). I want to add an edited and higher-quality video, too. Hand Solder SMD](http://www.davidhaillant.com/smd-soldering/), which explains what I call the “One pad at a time” method. -1. Turn the board around and place 3 rows of pin headers (top, bottom, vertical) - in the Teensy holes. The vertical pin header is required for powering the - LEDs. Do not solder these yet! +1. Turn the board around and place **3 rows of pin headers** (top, bottom, vertical) + in the Teensy holes. + + * The vertical pin header is required for powering the LEDs. + + * Do not solder the pin headers before placing the Teensy on top in the next + step: 1. Place your Teensy 3.x or 4.x on top of the pin header and solder all its pins.