defines.h

/****************************************************************************************************************************
  defines.h
  For SAM DUE with Ethernet module/shield.
  
  Based on and modified from Gil Maimon's ArduinoWebsockets library https://github.com/gilmaimon/ArduinoWebsockets
  to support STM32F/L/H/G/WB/MP1, nRF52 and SAMD21/SAMD51 boards besides ESP8266 and ESP32

  The library provides simple and easy interface for websockets (Client and Server).
  
  Built by Khoi Hoang https://github.com/khoih-prog/Websockets2_Generic
  Licensed under MIT license
 *****************************************************************************************************************************/

#ifndef defines_h
#define defines_h

#if ( defined(ARDUINO_SAM_DUE) || defined(__SAM3X8E__) )
  #if defined(WEBSOCKETS_ETHERNET_USE_SAMDUE)
    #undef WEBSOCKETS_ETHERNET_USE_SAMDUE
  #endif
  #define WEBSOCKETS_USE_ETHERNET             true
  #define WEBSOCKETS_ETHERNET_USE_SAMDUE      true
#else
  #error This code is intended to run only on the SAM DUE boards ! Please check your Tools->Board setting.
#endif

#if defined(WEBSOCKETS_ETHERNET_USE_SAMDUE)

  // For SAM DUE
  #if defined(ARDUINO_SAM_DUE)
    #define BOARD_TYPE      "SAM DUE"
  #elif defined(__SAM3X8E__)
    #define BOARD_TYPE      "SAM SAM3X8E"
  #else
    #define BOARD_TYPE      "SAM Unknown"
  #endif

#endif

#if defined(ARDUINO_BOARD)
  #define BOARD_NAME    ARDUINO_BOARD
#else
  #ifndef BOARD_NAME
    #define BOARD_NAME    BOARD_TYPE
  #endif
#endif

// Just select one to be true. If all is false, default is Ethernet_Generic. 
// If more than one are true, the priority is USE_ETHERNET_GENERIC, USE_ETHERNET_ENC, USE_UIP_ETHERNET
#define USE_ETHERNET_GENERIC          true
#define USE_ETHERNET_ENC              false
#define USE_UIP_ETHERNET              false

#if USE_ETHERNET_GENERIC
  // Also default to Ethernet_Generic library
  #include <Ethernet_Generic.h>
  #define ETHERNET_TYPE               "W5x00 and Ethernet_Generic Library"
#elif USE_ETHERNET_ENC
  #include <EthernetENC.h>
  #define ETHERNET_TYPE               "ENC28J60 and EthernetENC Library"  
#elif USE_UIP_ETHERNET
  #include <UIPEthernet.h>
  #include <utility/logging.h> 
  #define ETHERNET_TYPE               "ENC28J60 and UIPEthernet Library"
#else
  // Default to Ethernet_Generic library
  #include <Ethernet_Generic.h>
  #define ETHERNET_TYPE               "W5x00 and Ethernet_Generic Library"
#endif

#ifndef USE_THIS_SS_PIN
  #define USE_THIS_SS_PIN   10    // For other boards
#endif

#define DEBUG_WEBSOCKETS_PORT     Serial
// Debug Level from 0 to 4
#define _WEBSOCKETS_LOGLEVEL_     3

#if USE_ETHERNET_GENERIC
  // Change to true if using old Ethernet card with built-in SD
  #define ETHERNET_WITH_SD_CARD   false
#endif

#if (defined(ETHERNET_WITH_SD_CARD) && ETHERNET_WITH_SD_CARD)
  #define W5100_CS        10
  #define SDCARD_CS       4
#endif

// Enter a MAC address and IP address for your controller below.
#define NUMBER_OF_MAC      20

byte mac[][NUMBER_OF_MAC] =
{
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x01 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x02 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x03 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x04 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x05 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x06 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x07 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x08 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x09 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0A },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0B },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0C },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0D },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x0E },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x0F },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x10 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x11 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x12 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0x13 },
  { 0xDE, 0xAD, 0xBE, 0xEF, 0xBE, 0x14 },
};

#endif      //defines_h