emotiontech_pla.xml.fdm_material

<?xml version="1.0" encoding="UTF-8"?>
<fdmmaterial xmlns="http://www.ultimaker.com/material" version="1.3">
    <metadata>
        <name>
            <brand>eMotionTech</brand>
            <material>PLA</material>
            <color>Generic</color>
        </name>
        <GUID>99b895c2-5c41-48cc-b3b9-d9113e8c6a45</GUID>
        <version>14</version>
        <color_code>#ffc924</color_code>
        <description> </description>
        <adhesion_info> </adhesion_info>
    </metadata>
    <properties>
        <density>1.24</density>
        <diameter>1.75</diameter>
        <weight>2300</weight>
    </properties>
    <settings>
        <setting key="print temperature">200</setting>
        <setting key="heated bed temperature">60</setting>
        <setting key="standby temperature">150</setting>
        <setting key="retraction amount">1.4</setting>
        <setting key="build volume temperature">0</setting>
        <machine>
            <machine_identifier manufacturer="eMotionTech" product="Strateo3D"/>
            <hotend id="Standard 0.4" >
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">205</setting>
                <setting key="retraction amount">1.3</setting>
            </hotend>
            <hotend id="Standard 0.6" >
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">210</setting>
                <setting key="retraction amount">1.4</setting>
            </hotend>
            <hotend id="Standard 0.8">
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">215</setting>
                <setting key="retraction amount">1.4</setting>
            </hotend>
            <!-- Commented out until eMotionTech adds their hotend profiles to Cura.
			<hotend id="Standard 1.0">
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">225</setting>
                <setting key="retraction amount">1.5</setting>
            </hotend>
            <hotend id="Standard 1.2">
                <setting key="hardware compatible">yes</setting>
                <setting key="print temperature">245</setting>
                <setting key="retraction amount">1.9</setting>
            </hotend>
            -->
        </machine>
    </settings>
</fdmmaterial>