YSF2DMR Separate Callsign between YSF section and DMR section

[ik4nzd]

Hi everyone.
I would like to understand if it is possible to separate the Callsign between the YSF and DMR sections of the ysf2dmr.ini file.
Currently my callsign entered in the DMR section is used for authentication on BM and therefore I cannot change it.
It happens that if I connect to the Pysf3 reflector with my HotSpot, which therefore uses my call, I cannot take advantage of all the possibilities offered by the reflector via HotSpot so as not to also modify the parameters of the link to BM.
Same situation if I had to open 2 or more connections to DMR to collect other TGs.
On the DMR side I can create different SSID IDs to add to my ID code, but on the YSF reflector side I always show up only with my call which I cannot change.
If I try to modify the call, for example IK4NZD-1, IK4NZD_1, IK4NZD/1, RIK4NZD to present myself to YSF with different links, then BM does not authenticate me because it does not recognize the call.
Thanks for any explanation or clarification on the matter.
'73 de Adam, IK4NZD