Hub20 is a numpad with a bunch of features you never knew you needed. They include:
- Left and Right handed layouts supported, along with a 4x5 1U grid enabling it to be used as a macropad.
- Two rotary encoders, enabling intuitive controls for a wide range of tools including CAD and photo / video editing.
- Inbuilt USB 2.0 Hub with Type-C connectors, allowing connection to other keyboards, memory sticks, wireless receivers and more!
- VIA and QMK compatibility, including a "macro" mode enabling the keys to be remapped on a host computer.
- 27 addressable RGB leds, including one under each key.
If this project looks familiar, it's because it contains all the best parts of Hub16, with a few added extras.
Hardware is finalised and kits can be purchased from Tindie.
documentscontains all documentation and images for the project.firmwarecontains both the source and precompiled binaries for Hub20.hardwarecontains the KiCad design files for the keyboard.josh-kicad-libis my personal KiCad parts library which contains many of the parts used.scriptscontains a number of scripts used in the PCB design process.mechanicalscontain the plate and case design for Hub20.productioncontains all the files required to produce the PCB. It also contains test scripts and jigs.softwarecontains all the VIA config, along with template script to use Hub20 as a macropad with software on your computer.
The hub is a four port USB 2.0 Hub with Type-C connectors, aimed at allowing connection of keyboards, mice, memory sticks, wireless receivers, and other small devices (including a second Hub20!) to your computer.
Due to cost and space constraints, the hub has some limitations. The hub is not:
- USB 3.x, Power Delivery, Thunderbolt, DisplayPort, etc compatible.
- Designed to charge your phone quickly. Only 100mA is guaranteed per port.
- Designed to work with power hungry devices such as spinning hard drives.
- Guaranteed to provide full USB 2.0 speeds and performance on all ports.
Might you be able to charge your phone whilst copying files at full speed of a spinning hard drive over a long cable? Maybe. However Hub20 is a numpad first, USB hub second, so if you are looking for a high performance device I'd suggest picking up a dedicated USB hub and just using Hub20 as a numpad.
If you have any questions or comments please get in touch. I can be found on Discord as _joshajohnson#9451, Twitter, email, or leave an issue or pull request on this repo.