Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Linux Kernel 内核 和 Wireguard 安装问题请在此帖提出 #62

Open
jinwyp opened this issue Apr 13, 2021 · 13 comments
Open

Linux Kernel 内核 和 Wireguard 安装问题请在此帖提出 #62

jinwyp opened this issue Apr 13, 2021 · 13 comments
Assignees
@jinwyp

Comments

@jinwyp
Copy link
Owner

jinwyp commented Apr 13, 2021 •
edited
Loading

Linux Kernel 内核 和 Wireguard 安装问题请在此帖提出

Linux Kernel 内核 和 Wireguard 脚本安装方法

wget --no-check-certificate https://raw.githubusercontent.com/jinwyp/one_click_script/master/install_kernel.sh && chmod +x ./install_kernel.sh && ./install_kernel.sh

切换IPV4优先后导致VPS无法访问网络 的解决方法

#68
@jinwyp jinwyp self-assigned this Apr 13, 2021
@jinwyp jinwyp pinned this issue Apr 13, 2021
This was referenced Apr 13, 2021
Closed
Closed
Open
Open
@jinwyp jinwyp mentioned this issue May 14, 2021
Closed
@mingcxb
Copy link

mingcxb commented May 28, 2021

协议不受支持
客户端和服务器不支持一般 SSL 协议版本或加密套件。

安装之后用chrome浏览器访问域名出现以上错误，用http是可以打开网页的。知道什么原因吗？

@llity
Copy link

llity commented Feb 7, 2022

有些问题，请查阅。
`状态显示-- Wireguard 已启动成功!

wgcf trace

/dev/fd/62: line 2630: wgcf: command not found

==================================================

==================================================
状态显示-- WARP 已启动成功!

状态显示-- WARP SOCKS5 代理启动失败!

curl -x 'socks5h://127.0.0.1:40000' https://www.cloudflare.com/cdn-cgi/trace

curl: (7) Failed connect to 127.0.0.1:40000; Connection refused`

@llity
Copy link

llity commented Feb 7, 2022

我发现v2ray和Trojan共存的情况下，只有Trojan能使用，怎么回事呢？谢谢

@malikshi
Copy link

malikshi commented Jul 1, 2022

sir can you add this patch? https://blog.cloudflare.com/optimizing-tcp-for-high-throughput-and-low-latency/

@lomirus
Copy link

lomirus commented Oct 6, 2022

执行 1. 安装linux内核 bbr plus, 安装WireGuard, 用于解锁 Netflix 限制和避免弹出 Google reCAPTCHA 人机验证 后，无法 ssh 连接至服务器。通过 VNC 连接后，执行以下命令：

$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet6 xxx:xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x0<global>
    inet6 xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x20<link>
    ether xx:xx:xx:xx:xx:xx txqueuelen 1000 (Ethernet)
    RX packets 7595 bytes 719305 (702.4 KiB)
    RX errors 0 dropped 2225 overruns 0 frame 0
    TX packets 167 byes 35373 (34.5 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

io: ...(后面懒得打了，上面是手打的，因为是 vnc 连接 canvas 渲染，所以不能直接复制)

$ curl google.com
curl: (6) Could not resolve host: google.com

$ ping google.com
ping: google.com: Temporary failure in name resolution

不知道为什么貌似是无法连接到外网了

@lionkingc
Copy link

选69安装6.1,检测到最新是6.2.7 结果两个都安装不上

  1. 安装 BBR Plus 内核 6.1, UJX6N 编译
    Please input number:69

VPS服务器已成功设置为 IPv4 优先访问网络
UJX6N 编译的 最新的Linux bbrplus 内核版本号为 6.2.7

开始手动安装 linux 内核, 不支持Centos6

==================================================
Last metadata expiration check: 0:43:51 ago on Sun Apr 2 10:57:59 2023.
Package linux-firmware-20230217-113.git83f1d778.el8.noarch is already installed.
Dependencies resolved.
Nothing to do.
Complete!

准备从 UJX6N github 网站下载 bbrplus 6.1 的linux内核并安装
从 UJX6N 的 github 网站没有找到 Centos 8 的 6.1 Kernel

@Just-Like
Copy link

执行 1. 安装linux内核 bbr plus, 安装WireGuard, 用于解锁 Netflix 限制和避免弹出 Google reCAPTCHA 人机验证 后，无法 ssh 连接至服务器。通过 VNC 连接后，执行以下命令：

$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet6 xxx:xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x0<global>
    inet6 xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x20<link>
    ether xx:xx:xx:xx:xx:xx txqueuelen 1000 (Ethernet)
    RX packets 7595 bytes 719305 (702.4 KiB)
    RX errors 0 dropped 2225 overruns 0 frame 0
    TX packets 167 byes 35373 (34.5 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

io: ...(后面懒得打了，上面是手打的，因为是 vnc 连接 canvas 渲染，所以不能直接复制)

$ curl google.com
curl: (6) Could not resolve host: google.com

$ ping google.com
ping: google.com: Temporary failure in name resolution

不知道为什么貌似是无法连接到外网了
Ubuntu 18.04 LTS 执行 bash <(curl -Lso- https://git.io/kernel.sh) 后选45 重启后服务器在线，ssh连不上了

@Just-Like
Copy link

执行 1. 安装linux内核 bbr plus, 安装WireGuard, 用于解锁 Netflix 限制和避免弹出 Google reCAPTCHA 人机验证 后，无法 ssh 连接至服务器。通过 VNC 连接后，执行以下命令：

$ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
    inet6 xxx:xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x0<global>
    inet6 xxxx:xxxx:xxxx:xxxx:xxxx prefixlen 64 scopeid 0x20<link>
    ether xx:xx:xx:xx:xx:xx txqueuelen 1000 (Ethernet)
    RX packets 7595 bytes 719305 (702.4 KiB)
    RX errors 0 dropped 2225 overruns 0 frame 0
    TX packets 167 byes 35373 (34.5 KiB)
    TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

io: ...(后面懒得打了，上面是手打的，因为是 vnc 连接 canvas 渲染，所以不能直接复制)

$ curl google.com
curl: (6) Could not resolve host: google.com

$ ping google.com
ping: google.com: Temporary failure in name resolution

不知道为什么貌似是无法连接到外网了
Ubuntu 18.04 LTS 执行 bash <(curl -Lso- https://git.io/kernel.sh) 后选45 重启后服务器在线，ssh连不上了

解决了 因为安装了两个不通版本的内核

@leegyack
Copy link

leegyack commented Aug 6, 2023

请问：在菜单11设置WGCF解锁Netfile，chatgpt等错误时，有没有可以不需要卸载重装而进行改正的方法呢，已经装好WGCF而且运行正常。

@JAXo-China
Copy link

JAXo-China commented Sep 26, 2023 •
edited
Loading

debian11安装5.19内核失败，麻烦帮忙看看呢。

dpkg --get-selections | grep linux-image-5.19.0-0 | awk '/linux-image-[4-9]./{print $1}' | awk -F'linux-image-' '{print $2}'

Debian 官方源安装 linux 内核版本:

开始安装 linux-image 命令为: apt install -y linux-image-
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package linux-image

开始安装 linux-headers 命令为: apt install -y linux-headers-
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package 'linux-headers' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

@liwenjie119
Copy link

安装内核时中间出现dracut报错，最后虽然已经安装上了，但是不知道是否有影响

==================================================
 开始安装 linux 内核版本: 6.7.4-bbrplus

error: open of CentOS-8_Required_kernel-bbrplus-core-6.7.4-1.bbrplus.el8.x86_64.rpm failed: No such file or directory
Verifying...                          ################################# [100%]
Preparing...                          ################################# [100%]
Updating / installing...
   1:kernel-6.7.4-bbrplus.el8         ################################# [ 50%]
   2:kernel-headers-6.7.4-bbrplus.el8 ################################# [100%]
/etc/dracut.conf.d/cxthhhhh.conf:add_drivers+="virtio_blk virtio_scsi virtio_net xen-blkfront xen-netfront xenfs xen_privcmd hv_storvsc hv_vmbus hv_utils mptspi scsi_transport_spi mptscsih mptbase"

dracut: WARNING: <key>+=" <values> ": <values> should have surrounding white spaces!
dracut: WARNING: This will lead to unwanted side effects! Please fix the configuration file.

dracut-install: ERROR: installing 'xen_blkfront'
dracut: FAILED:  /usr/lib/dracut/dracut-install -D /var/tmp/dracut.aYoabA/initramfs --kerneldir /lib/modules/6.7.4-bbrplus.el8.x86_64/ -m virtio_blk virtio_scsi virtio_net xen_blkfront xen-netfront xenfs xen_privcmd hv_storvsc hv_vmbus hv_utils mptspi scsi_transport_spi mptscsih mptbase
 ==================================================

Generating grub configuration file ...
done

    查看当前 grub 菜单启动项列表, 确保新安装的内核 6.7.4-bbrplus 是否在第一项 

    查看当前 grub 启动顺序是否已设置为第一项 
grub2-editenv list
saved_entry=0
kernelopts=root=/dev/mapper/cl-root ro crashkernel=auto rd.lvm.lv=cl/root net.ifnames=0 biosdevname=0 
boot_success=0
 ==================================================

 ==================================================
    安装 linux 内核 6.7.4-bbrplus 成功! 
    请根据以下信息 检查新内核是否安装成功，无新内核不要重启! 
 ==================================================

 ==================================================
 状态显示--当前Linux 内核版本: 6.1 , 6.1.8-1.el8.elrepo.x86_64 
           当前系统内核高于4.9, 支持开启 BBR, BBR 已启动成功
           当前系统内核不支持开启 BBR2
           当前系统内核不支持开启 BBR Plus
 ==================================================


 ==================================================
 状态显示--当前已安装的 Linux 内核: 

kernel-6.7.4-bbrplus.el8.x86_64
kernel-ml-core-6.1.8-1.el8.elrepo.x86_64
kernel-ml-6.1.8-1.el8.elrepo.x86_64
kernel-headers-6.7.4-bbrplus.el8.x86_64
kernel-ml-modules-6.1.8-1.el8.elrepo.x86_64

 如安装内核遇到kernel kernel-headers kernel-devel版本不一致问题, 请手动卸载已安装的kernel
 卸载内核命令 rpm --nodeps -e kernel-xxx名称
 ==================================================

 开始准备删除 kernel 内核, 建议删除 
 注意: 删除内核有风险, 可能会导致VPS无法启动, 请先做好备份! 
是否删除内核? 直接回车默认删除内核, 请输入[Y/n]:^C
[root@server ~]# df -h
Filesystem           Size  Used Avail Use% Mounted on
devtmpfs             973M     0  973M   0% /dev
tmpfs                990M  4.2M  986M   1% /dev/shm
tmpfs                990M   96M  895M  10% /run
tmpfs                990M     0  990M   0% /sys/fs/cgroup
/dev/mapper/cl-root   58G   16G   41G  28% /
/dev/vda1            974M  151M  756M  17% /boot
tmpfs                198M     0  198M   0% /run/user/0

@lesszzen
Copy link

发现xanmod 6.6默认启用bbr3，不用配置net.ipv4.tcp_congestion_control，但脚本会检测导致报错，不影响结果

@wgetnz
Copy link

wgetnz commented May 21, 2024

Ubuntu 24.xLTS 貌似不支持bbrplus内核，多次安装失败，可能是内核版本过低

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@jinwyp jinwyp

Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests