Vacuum robot #76
Comments
|
Does it work again (temporary) if you restart the Mi Home Homey app? |
|
Yes you can push every button but it gives a time out error all the time. Finally it does something, but due to the time outs it's getting wild in doing everything. |
|
Maybe it's a severe case of this issue: #27 . That's something I can not fix. Would be strange though that it has become worse with firmware 2.x. What is the exact error you get on the flow card? |
|
That's the funny part, I do not get an error at all in a flow.
He just isn't reacting....all the time.
I just get time outs if I switch from for example cleaning to paused etc.
In the Xiaomi app thuis works flawless.
Verstuurd door Outlook<http://taps.io/outlookmobile> voor Android
…________________________________
From: Jelger Haanstra <[email protected]>
Sent: Saturday, February 23, 2019 7:52:36 AM
To: jghaanstra/com.xiaomi-miio
Cc: Pim65; Author
Subject: Re: [jghaanstra/com.xiaomi-miio] Vacuum robot (#76)
Maybe it's a severe case of this issue: #27<#27> . That's something I can not fix. Would be strange though that it has become worse with firmware 2.x.
What is the exact error you get on the flow card?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#76 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/Amph_b77iBDi-Rg5_TzP5OCOOJBfxpioks5vQOU0gaJpZM4bKQ4G>.
|
|
I really dont know what is wrong then. You could try and run the app from the command line and try again. Perhaps that will spit out some extra logging that will point in a direction. For now I can not help you. |
|
Have you tried re-adding the device? Not sure if that helps but it might be worth a try. |
|
Hi Jelger,
I deleted the Robot, and got the token refreshed.
Problem is now that I can not install it in Homey.
everything is filled out correctly..
Pim
…________________________________
Van: Jelger Haanstra <[email protected]>
Verzonden: zondag 24 februari 2019 19:20
Aan: jghaanstra/com.xiaomi-miio
CC: Pim65; Author
Onderwerp: Re: [jghaanstra/com.xiaomi-miio] Vacuum robot (#76)
I really dont know what is wrong then. You could try and run the app from the command line and try again. Perhaps that will spit out some extra logging that will point in a direction. For now I can not help you.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#76 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/Amph_bu0ttI1yDdAn04bntNe3XfzT9RMks5vQtfqgaJpZM4bKQ4G>.
|
|
Could you post a screenshot from the pairing screen with error when testing the connection. |
|
[cid:05672983-5ce5-413e-8749-e0136096e59d]
[cid:41b482a0-7f7c-4e3f-aa58-13c8fdd6c59c]
…________________________________
Van: Jelger Haanstra <[email protected]>
Verzonden: woensdag 27 februari 2019 12:53
Aan: jghaanstra/com.xiaomi-miio
CC: Pim65; Author
Onderwerp: Re: [jghaanstra/com.xiaomi-miio] Vacuum robot (#76)
Could you post a screenshot from the pairing screen with error when testing the connection.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#76 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/Amph_WKsuN4TsFWZ6_wbzzwc9wXPj5goks5vRnHLgaJpZM4bKQ4G>.
|
|
Try again, something went wrong posting the screenshots. |
|
|
|
What I see is that the IP address in the Mi ToolKit differs from the one you are trying to add. 192.168.178.84 versus 192.168.178.84. Are you using the wrong IP? |
|
Also with the IP address change, no luck, same thing
Verstuurd door Outlook<http://taps.io/outlookmobile> voor Android
…________________________________
From: Jelger Haanstra <[email protected]>
Sent: Wednesday, February 27, 2019 3:20:23 PM
To: jghaanstra/com.xiaomi-miio
Cc: Pim65; Author
Subject: Re: [jghaanstra/com.xiaomi-miio] Vacuum robot (#76)
What I see is that the IP address in the Mi ToolKit differs from the one you are trying to add. 192.168.178.84 versus 192.168.178.84. Are you using the wrong IP?
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#76 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/Amph_ax4ArdkVJiwVGlXR-lAfnhCxjEZks5vRpQngaJpZM4bKQ4G>.
|
|
Same error? Really dont know what is wrong. You seem to be the only one with this issue. Dont think I can help you with it. |
|
I will try a total reset of the robot
Verstuurd door Outlook<http://taps.io/outlookmobile> voor Android
…________________________________
From: Jelger Haanstra <[email protected]>
Sent: Wednesday, February 27, 2019 6:28:18 PM
To: jghaanstra/com.xiaomi-miio
Cc: Pim65; Author
Subject: Re: [jghaanstra/com.xiaomi-miio] Vacuum robot (#76)
Same error?
Really dont know what is wrong. You seem to be the only one with this issue. Dont think I can help you with it.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#76 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/Amph_esY06JCypdm4TpSR43utWlGvdVsks5vRsAygaJpZM4bKQ4G>.
|
|
I did a robot reset > new token > app is back alive , but still a lot of time out errors (error sending value timed out after 3000Ms)
beside that it seems to work.
Thanks for your help!
…________________________________
Van: Jelger Haanstra <[email protected]>
Verzonden: woensdag 27 februari 2019 18:28
Aan: jghaanstra/com.xiaomi-miio
CC: Pim65; Author
Onderwerp: Re: [jghaanstra/com.xiaomi-miio] Vacuum robot (#76)
Same error?
Really dont know what is wrong. You seem to be the only one with this issue. Dont think I can help you with it.
—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub<#76 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/Amph_esY06JCypdm4TpSR43utWlGvdVsks5vRsAygaJpZM4bKQ4G>.
|
|
Unfortunately the time-out issue is something I can not fix. It's related to the miio protocol and how the miio nodejs library was coded. |
Hi,
Ive got the robot quite a long time, worked great with homey 1.5, but in v2 it isnt working at all. If i change status in the app, the robot is not reacting and gives a time out.if i give the robot the signal of cleaning (on the robot) the status in homey does change to cleaning. If its paused or charging it doesnt change in Homey.
What could this be?
Thanks Pim
The text was updated successfully, but these errors were encountered: