RaspberryMatic 3.79.6.20241031

[jens-maus]

This is release 3.79.6.20241031 of RaspberryMatic which is a major release with the following bugfixes and feature changes:

_{Hier klicken für deutschsprachige 🇩🇪🇦🇹🇨🇭 Version des ChangeLogs/Diskussionsbeitrag}

🚧 Changes:

_{For all changes, see the full commit log.}

CCU/HomeMatic service changes:

• 8f2c8f78f - updated OCCU version to 3.79.6-2 integrating full compatibility to the CCU3 3.79.6 firmware which comes with the following changes:
  • ⚠️ BREAKING CHANGE ⚠️: Due to changes in the HmIPServer service of the 3.79.x firmware, a downgrade to previous versions may result in lost HmIP devices. Users are therefore highly advised to create a sbk-file Backup previous to any update to 3.79.x in case a downgrade is required to previous versions so that this backup can be restored then.
  • update ReGaHss logic engine to version R1.00.0388.0243 (Oct 27 2024):
    • finally provide a 64bit native binary for all 64bit supported platforms (aarch64, x86_64) (c.f. Switch to 64bit kernel+OS environment (x86_64, aarch64) #903).
    • enabled _TIME_BITS=64 and removed hard limit <= year 2037 in the internal date check so that time_t values can carry 64bit signed values, thus dealing with dates with year >= 2038. This fixes certain Y2038 limitations for 64bit and 32bit versions of ReGaHss, thus make it Y2038+ aware.
    • changed script engine to use a 64bit integer datatype per default, thus e.g. integer values >2^31 can be used now.
    • add fix to correctly convert to an ISE object ID for certain script functions. Now several script functions can either take the object ID or directly derive it from the supplied object itself.
    • removed individual thread stack size settings and rely on the default stack sizes of the underlying operating system instead. This fixes certain crash issues with too low stack sizes in case of deep nested loop recursions.
    • fix issue with .GetAt() indexing not working correctly with 64bit integers.
  • With some dimmer links, a value entered as a percentage was displayed too small by a factor of 100 in expert mode.
  • HmIP-SWO (weather sensor) - The description for calculating the brightness threshold of the corresponding configuration parameter has been adjusted. Previously, the brightness threshold was set too low by the customer by a factor of 10.
  • HmIP-RGBW - When linking to a button, the value “S” (Saturation) was not applied to the color selection picker.
  • When using a system variable in %, this was output too small by a factor of 100.
  • HmIP-STV (tilt/vibration sensor) - The possible values for the configuration parameters angle and hysteresis for position detection and tilt detection have been adjusted.
  • The Easymode for devices of channel type COND_SWITCH_TRANSMITTER_TEMPERATURE, e.g. HmIP-STE-2-PCB, has been extended by 2 additional subsets:
    • Upper temperature threshold exceeded on / lower threshold undershot off
    • Upper temperature threshold exceeded off / lower threshold undershot on
  • The “Hours” option has been removed from the “Event delay” channel parameter
  • Easymodes for dimming actuators have been expanded to include the 'Minimum level in “on” state' parameter. This allows LED lamps to be switched on at lower values.
  • Thermostats now have the option of choosing between heating and cooling under Status/Operation.
  • Easymode added for linking the presence detector HmIP-SPI with HmIP-RGBW, HmIP-LSS and HmIP-DRG-DALI.
  • You can now filter by device under Status and operation.
• b676b5736 - fix SYSTEM_HAS_USER_KEY usage/setup in restore_backup.cgi script of recovery system.
• 5d3345f53 - complete rework of restoreBackup.sh to not apply a supplied sbk backup right away but schedule it for the next boot cycle instead like a normal webui based backup restore is doing this. In addition, the new version now allows to perform certain consistency checks of a sbk backup and outputs this information on the command-line in addition to allowing to check if a supplied security key matches the backup and/or already installed system key.
• b9479dd00 - enable firewall error logging per default and output as user.err instead.

WebUI changes:

• d5df55afb - Fix umlauts in translate.lang.js of 0136-WebUI-Add-Tailscale-VPN WebUI patch (Fix umlaute in translate.lang.js #2883, Fix more missing umlaut escape characters #2884, @boppbo)
• b86c8b2bf - add another style glitch patch which brings back the more dense device list presentation in the device status display in OCCU 3.79.x.
• b100e2c44 - remove of the 0024-WebUI-Filter-Operations WebUI patch which has been integrated by eQ3 in OCCU 3.79.4.
• 2a18bc977 - update CodeMirror script editor to latest 5.65.18 version.

Operating system changes:

• beaed5276 - update rpi-eeprom to latest pieeprom-2024-10-21.bin
• a7713a477 - add noexec,nosuid,nodev mount options to certain tmpfs mounts to ensure they are more safe to being misused. Also changed inittab to not directly mount but respect fstab settings/options.
• 655b9f697 - update upstream kernel to 6.6.58
• 2520ae049 - bump qemu-guest-agent to 9.1.1
• 056307e76 - update tailscale to latest v1.76.1 (Update Tailscale v1.76.1 #2882, @fl0x53).
• fa328755b - ensure that /etc/init.d/S50crond is removed in post-build.sh because we do have our own crond startup script in S98 (cron.err im Logfile beim Start der RM seit einigen Nightly-Versionen #2858).
• 30d9efe11 - update buildroot to latest 2024.08.1
• 4f71d8b7b - updated java azul to latest 11.76.21-ca-jre11.0.25
• 3ef3eb07e - set init_on_free=0 as default cmdline kernel option for generic-x86_64 to get certain newer NUC systems to boot correctly again when doing a UEFI boot (RaspberryMatic-3.77.7.20240826-generic-x86_64 lässt sich auf einem NUC8i3BEH nicht installieren #2834).
• d3d203baf - update rpi linux kernel to latest version (stable_20241008 / 6.6.51)
• 720613ae6 - update rpi-firmware to latest version (1.20241008)
• 1a6b257ad - add missing LIMIT and HF netfilter kernel extensions for improved ipv6 firewall support (ip6tables limit+hf kernel extensions missing #2874).

👪 Contributors (alphabetically):

• @boppbo
• @fl0x53
• @jens-maus

📝 Support:

For support on installation and help please visit the following web pages:

RaspberryMatic - Documentation 🇺🇸
RaspberryMatic - Discussions 🇺🇸
RaspberryMatic - Dokumentation 🇩🇪
RaspberryMatic - Forum 🇩🇪

📦 Download:

The following installation archives can be downloaded for different hardware platforms. To verify their integrity a sha256 checksum is provided as well. You can either upload these files using the WebUI-based update mechanism or unarchive them to e.g. flash the included *.img files on a fresh installation media (e.g. microSD card):

• RaspberryPi5 Model B – (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-rpi5.zip
  SHA256: 5f091b3fd2a57538a1e0c42a0dc665a9cb67f27a908b0994c30e6f243e9d2034}

• RaspberryPi4 Model B, RaspberryPi Compute Module 4, RaspberryPi 400 – (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-rpi4.zip
  SHA256: 66648525e0663c7355c6e6317967f7010e4cf64c96bbac3865d18e5463679ead}

• CCU3, ELV-Charly, RaspberryPi3 Model B+, RaspberryPi3 Model B, RaspberryPi3 Model A+, RaspberryPi Compute Module 3, RaspberryPi Compute Module 3 lite, RaspberryPi Zero 2 W – (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-rpi3.zip
  SHA256: 0d91ec1b6a58f9926e877643bc90489de02d24625aac7c7ebda9020f57057e03
  📦 RaspberryMatic-3.79.6.20241031-ccu3.tgz (only for initial CCU3 Firmware -> RaspberryMatic Upgrade)
  SHA256: 41ff208d302f96739f083d485ab15051e8b0c3c9e07c3f098d87dd34d8a4e73a}

• RaspberryPi2 Model B – (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-rpi2.zip
  SHA256: 878d8767b671821839f1ceffc02acc011083db1fd41df7c83d67131620f91756}

• RaspberryPi Zero W, RaspberryPi Zero, RaspberryPi Compute Module 1, RaspberryPi1 (A+/B+) – (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-rpi0.zip
  SHA256: 82a8100501c79e6069986d301bcdd3521e011fd67b01e2560533ac07a75f7f66}

• TinkerBoard S, TinkerBoard – (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-tinkerboard.zip
  SHA256: 4ac273567547d181ed46b9d38ddb6a3ad3cfd9b619c5f53185686adc13828ac8}

• ODROID-N2/N2+/C4/C2 – (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-odroid-n2.zip
  SHA256: dceae989fff20b386ce634ccf4594acaef16f84ea11f7f916a23c8037dcab04f
  📦 RaspberryMatic-3.79.6.20241031-odroid-c4.zip
  SHA256: 35d16b5ab5ba39239e302502ac97dd35449738d7d08d819fce74004e868ac946
  📦 RaspberryMatic-3.79.6.20241031-odroid-c2.zip
  SHA256: 877e8383104d95b91dbbb767f1b97bd8ac8e86bb3b2c2db1386cdc436c99667d}

• Generic-x86_64 – (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-generic-x86_64.zip
  SHA256: 0eabcfef4be512fa2c1d0412365864af4005f96d2b74f10e32b5b552e8644106}

• Open Virtual Appliance (OVA) – (ProxmoxVE, VirtualBox, ESXi, Synology, QNAP, Workstation Player, QEmu, UNRAID, HyperV):
  _{📦 RaspberryMatic-3.79.6.20241031-ova.zip
  SHA256: dc5e4d0fa41957f176a7a3122740b37531195d734da967c0e2d7b19d46a58e9a
  📦 RaspberryMatic-3.79.6.20241031.ova (only for initial OVA installation)
  SHA256: 7c04787fdfcd2dc40ea69dbf4609ccc262531571e8701a6c0473b2d64df204aa}

• Docker / Open Container Initiative (OCI) – virtual appliance (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-oci_amd64.tgz (amd64/x86_64)
  SHA256: 40ed73a8dfc42d6f88c15d4c7927830a72c534b24fec2f9cd548857922e0af70
  📦 RaspberryMatic-3.79.6.20241031-oci_arm64.tgz (arm64/aarch64)
  SHA256: c412f69e6910ad2c3539906eb049ec7c066b21633ad49cf2d9dfc8420c8be752
  📦 RaspberryMatic-3.79.6.20241031-oci_arm.tgz (arm/armhf)
  SHA256: 78686502fee1eb2c36d7d6a5b22aa1ab7372d4c961206ce9e6c68b59f32667ed}

• LXC Container – virtual appliance (installation):
  _{📦 RaspberryMatic-3.79.6.20241031-lxc_amd64.tar.xz (amd64/x86_64)
  SHA256: d3f589a4a28195086f612c14b77a1176a306949dd81f7bdca5bc686a94db9c84
  📦 RaspberryMatic-3.79.6.20241031-lxc_arm64.tar.xz (arm64/aarch64)
  SHA256: 814e5973411ef0961f679be9ce0b378c7f66878f99b85f1c7a4953ddcb256533
  📦 RaspberryMatic-3.79.6.20241031-lxc_arm.tar.xz (arm/armhf)
  SHA256: a2ae1f4b752ba0c17999bf80848153436798ccd616922981aaa51871705b7db6}

• Generic-aarch64 Appliance – (ProxmoxVE):
  _{📦 RaspberryMatic-3.79.6.20241031-generic-aarch64.zip
  SHA256: 4f65ed01797b1b79f502c047abc96a890f417ba32251e40b3104be036607cbd0}

• Kubernetes / K8s – virtual appliance:
  _{see install documentation}

• Home Assistant Add-on – virtual appliance:
  _{see install documentation}

---

This discussion was created from the release RaspberryMatic 3.79.6.20241031.

[N3rdix]

Update went smooth as always 👍

I was excited to see [HMCCU-1231] to switch between heat/cool for my thermostats (HmIP-BWTH) but it's not visible at all.
Channel 5 is already set to heat/cool...

Anyone had luck?

[fl0x53]

It's a bit odd for me, I have the buttons on 5 out of 10 thermostats. I couldn't figure out what the difference is...

[N3rdix]

Also odd:
I see the 2 buttons on the group of thermostats, but not on any single device...

[CB1277]

Update done. Works quiet well.

But I recogniced a problem, in programme and connections > programme and base connections you can select in the line action aktive, viewable and operable. When the last one will be deselected, it can´t be selected again.

Got anyone else that problem?

[jens-maus]

Show a screenshot and open a separate discussion thread if the issue is permanent.

[fl0x53]

Works for me 🤷

[Baxxy13]

Deactivate "operable" and activate it.
Reload program-list or log out of the WebUI, log in and check.

[tomturo245]

Update went well :-) as always. Only problem I found: the push messages from Pocket Control are not working anymore. Thought about downgrading to find out whether it is related to the new version. Then I saw the warning ** Breaking change ***

Does anyone else has problems with this? I changed my Iphone and hope it is not the root cause for the problem....