Skip to content

jcallahan-akamai/linode-cli

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

linode-cli

The Linode Command Line Interface

https://raw.githubusercontent.com/linode/linode-cli/main/demo.gif

Installation

From pypi:

pip3 install linode-cli

From source:

git clone [email protected]:linode/linode-cli.git
cd linode-cli
make install

This will need to be repeated on each pull. For a build to succeed, see Building from Source below.

Docker Hub

The Linode CLI can also be downloaded and run using the image available on Docker Hub.

Using a Linode API Token:

docker run --rm -it -e LINODE_CLI_TOKEN=$LINODE_TOKEN linode/cli:latest linodes list

Using an existing config file:

docker run --rm -it -v $HOME/.config/linode-cli:/home/cli/.config/linode-cli linode/cli:latest linodes list

Upgrading

To upgrade to the latest version of the Linode CLI:

pip3 install linode-cli --upgrade

Community Distributions

The Linode CLI is also available through the following unofficial channels thanks to our awesome community! Please note that these distributions are not included in our release testing.

Homebrew

Installation:

brew install linode-cli

Upgrading:

brew upgrade linode-cli

Usage

The Linode CLI is invoked with the linode-cli. The CLI accepts two primary arguments, command and action:

linode-cli <command> <action>

command is the part of the CLI you are interacting with, for example "linodes". You can see a list of all available commands by using --help:

linode-cli --help

action is the action you want to perform on a given command, for example "list". You can see a list of all available actions for a command with the --help for that command:

linode-cli linodes --help

Some actions don't require any parameters, but many do. To see details on how to invoke a specific action, use --help for that action:

linode-cli linodes create --help

The first time you invoke the CLI, you will be asked to configure (see "Configuration" below for details), and optionally select some default values for "region," "image," and "type." If you configure these defaults, you may omit them as parameters to actions and the default value will be used.

Common Operations

List Linodes:

linode-cli linodes list

List Linodes in a Region:

linode-cli linodes list --region us-east

Make a Linode:

linode-cli linodes create --type g5-standard-2 --region us-east --image linode/debian9 --label cli-1 --root_pass

Make a Linode using Default Settings:

linode-cli linodes create --label cli-2 --root_pass

Reboot a Linode:

linode-cli linodes reboot 12345

View available Linode types:

linode-cli linodes types

View your Volumes:

linode-cli volumes list

View your Domains:

linode-cli domains list

View records for a single Domain:

linode-cli domains records-list 12345

View your user:

linode-cli profile view

Configuration

The first time the CLI runs, it will prompt you to configure it. The CLI defaults to using web-based configuration, which is fast and convenient for users who have access to a browser.

To manually configure the CLI or reconfigure it if your token expires, you can run the configure command:

linode-cli configure

If you prefer to provide a token directly through the terminal, possibly because you don't have access to a browser where you're configuring the CLI, pass the --token flag to the configure command as shown:

linode-cli configure --token

When configuring multiple users using web-based configuration, you may need to log out of cloud.linode.com before configuring a second user.

Specifying List Arguments

When running certain commands, you may need to specify multiple values for a list argument. This can be done by specifying the argument multiple times for each value in the list. For example, to create a Linode with multiple tags you can execute the following:

linode-cli linodes create --region us-east --type g6-nanode-1 --tags tag1 --tags tag2

Specifying Nested Arguments

When running certain commands, you may need to specify an argument that is nested in another field. These arguments can be specified using a . delimited path to the argument. For example, to create a firewall with an inbound policy of DROP and an outbound policy of ACCEPT, you can execute the following:

linode-cli firewalls create --label example-firewall --rules.outbound_policy ACCEPT --rules.inbound_policy DROP

Suppressing Defaults

If you configured default values for image, authorized_users, region, and Linode type, they will be sent for all requests that accept them if you do not specify a different value. If you want to send a request without these arguments, you must invoke the CLI with the --no-defaults option.

For example, to create a Linode with no image after a default Image has been configured, you would do this:

linode-cli linodes create --region us-east --type g5-standard-2 --no-defaults

Suppressing Warnings

In some situations, like when the CLI is out of date, it will generate a warning in addition to its normal output. If these warnings can interfere with your scripts or you otherwise want them disabled, simply add the --suppress-warnings flag to prevent them from being emitted.

Shell Completion

To generate a completion file for a given shell type, use the completion command; for example to generate completions for bash run:

linode-cli completion bash

The output of this command is suitable to be included in the relevant completion files to enable command completion on your shell.

This command currently supports completions bash and fish shells.

Use bashcompinit on zsh with the bash completions for support on zsh shells.

Environment Variables

If you prefer, you may store your token in an environment variable named LINODE_CLI_TOKEN instead of using the configuration file. Doing so allows you to bypass the initial configuration, and subsequent calls to linode-cli configure will allow you to set defaults without having to set a token. Be aware that if the environment variable should be unset, the Linode CLI will stop working until it is set again or the CLI is reconfigured with a token.

You may also use environment variables to store your Object Storage Keys for the obj plugin that ships with the CLI. To do so, simply set LINODE_CLI_OBJ_ACCESS_KEY and LINODE_CLI_OBJ_SECRET_KEY to the appropriate values. This allows using Linode Object Storage through the CLI without having a configuration file, which is desirable in some situations.

Multiple Users

If you use the Linode CLI to manage multiple Linode accounts, you may configure additional users using the linode-cli configure command. The CLI will automatically detect that a new user is being configured based on the token given.

Displaying Configured Users

To see what users are configured, simply run the following:

linode-cli show-users

The user who is currently active will be indicated by an asterisk.

Changing the Active User

You may change the active user for all requests as follows:

linode-cli set-user USERNAME

Subsequent CLI commands will be executed as that user by default.

Should you wish to execute a single request as a different user, you can supply the --as-user argument to specify the username you wish to act as for that command. This will not change the active user.

Removing Configured Users

To remove a user from you previously configured, run:

linode-cli remove-user USERNAME

Once a user is removed, they will need to be reconfigured if you wish to use the CLI for them again.

Customizing Output

Changing Output Fields

By default, the CLI displays on some pre-selected fields for a given type of response. If you want to see everything, just ask:

linode-cli linodes list --all

Using --all will cause the CLI to display all returned columns of output. Note that this will probably be hard to read on normal-sized screens for most actions.

If you want even finer control over your output, you can request specific columns be displayed:

linode-cli linodes list --format 'id,region,status,disk,memory,vcpus,transfer'

This will show some identifying information about your Linode as well as the resources it has access to. Some of these fields would be hidden by default - that's ok. If you ask for a field, it'll be displayed.

Output Formatting

While the CLI by default outputs human-readable tables of data, you can use the CLI to generate output that is easier to process.

Machine Readable Output

To get more machine-readable output, simply request it:

linode-cli linodes list --text

If a tab is a bad delimiter, you can configure that as well:

linode-cli linodes list --text --delimiter ';'

You may also disable header rows (in any output format):

linode-cli linodes list --no-headers --text

JSON Output

To get JSON output from the CLI, simple request it:

linode-cli linodes list --json --all

While the --all is optional, you probably want to see all output fields in your JSON output. If you want your JSON pretty-printed, we can do that too:

linode-cli linodes list --json --pretty --all

Plugins

The Linode CLI allows its features to be expanded with plugins. Some official plugins come bundled with the CLI and are documented above. Additionally, anyone can write and distribute plugins for the CLI - these are called Third Party Plugins.

To register a Third Party Plugin, use the following command:

linode-cli register-plugin PLUGIN_MODULE_NAME

Plugins should give the exact command required to register them.

Once registered, the command to invoke the Third Party Plugin will be printed, and it will appear in the plugin list when invoking linode-cli --help.

To remove a previously registered plugin, use the following command:

linode-cli remove-plugin PLUGIN_NAME

This command accepts the name used to invoke the plugin in the CLI as it appears in linode-cli --help, which may not be the same as the module name used to register it.

Developing Plugins

For information on how To write your own Third Party Plugin, see the Plugins documentation.

Building from Source

In order to successfully build the CLI, your system will require the following:

  • The make command
  • python3
  • pip3 (to install requirements.txt)

Before attempting a build, install python dependencies like this:

make requirements

Once everything is set up, you can initiate a build like so:

make build

If desired, you may pass in SPEC=/path/to/openapi-spec when running build or install. This can be a URL or a path to a local spec, and that spec will be used when generating the CLI. A yaml or json file is accepted.

To install the package as part of the build process, use this command:

make install

Testing

WARNING! Running the CLI tests will remove all linodes and data associated with the account. It is only recommended to run these tests if you are an advanced user.

Installation

The CLI uses the Bash Automated Testing System (BATS) for testing. To install run the following:

OSX users:

brew install bats-core

Installing Bats from source

Check out a copy of the Bats repository. Then, either add the Bats bin directory to your $PATH, or run the provided install.sh command with the location to the prefix in which you want to install Bats. For example, to install Bats into /usr/local:

git clone https://github.com/bats-core/bats-core.git
cd bats-core
./install.sh /usr/local

Running the Tests

Running the tests is simple. The only requirements are that you have a .linode-cli in your user folder containing your test user token:

./test/test-runner.sh

Running Tests via Docker

The openapi spec must first be saved to the base of the linode-cli project:

curl -o ./openapi.yaml https://www.linode.com/docs/api/openapi.yaml

Run the following command to build the tests container:

docker build -f Dockerfile-bats -t linode-cli-tests .

Run the following command to run the test

docker run -e TOKEN_1=$INSERT_YOUR_TOKEN_HERE -e TOKEN_2=$INSERT_YOUR_TOKEN_HERE --rm linode-cli-tests

Contributing

This CLI is generated based on the OpenAPI specification for Linode's API. As such, many changes are made directly to the spec.

Please follow the Contributing Guidelines when making a contribution.

Specification Extensions

In order to be more useful, the following Specification Extensions have been added to Linode's OpenAPI spec:

Attribute Location Purpose
x-linode-cli-action method The action name for operations under this path. If not present, operationId is used.
x-linode-cli-color property If present, defines key-value pairs of property value: color. Colors must be one of "red", "green", "yellow", "white", and "black". Must include a default.
x-linode-cli-command path The command name for operations under this path. If not present, "default" is used.
x-linode-cli-display property If truthy, displays this as a column in output. If a number, determines the ordering (left to right).
x-linode-cli-format property Overrides the "format" given in this property for the CLI only. Valid values are file and json.
x-linode-cli-skip path If present and truthy, this method will not be available in the CLI.
x-linode-cli-allowed-defaults requestBody Tells the CLI what configured defaults apply to this request. Valid defaults are "region", "image", "authorized_users", and "type".
x-linode-cli-nested-list content-type

Tells the CLI to flatten a single object into multiple table rows based on the keys included in this value. Values should be comma-delimited JSON paths, and must all be present on response objects.

When used, a new key _split is added to each flattened object whose value is the last segment of the JSON path used to generate the flattened object from the source.

x-linode-cli-use-schema content-type Overrides the normal schema for the object and uses this instead. Especially useful when paired with x-linode-cli-nested-list, allowing a schema to describe the flattened object instead of the original object.

Releases

No releases published

Packages

No packages published

Languages

  • Python 69.5%
  • Shell 29.1%
  • Other 1.4%