firmware.ino

/*
              .__                                   .___          _____.__                .__   ___.                          
  ____   ____ |  |__ _____    ____   ____  ____   __| _/        _/ ____\  | _____    _____|  |__\_ |__ _____    ____    ____  
_/ __ \ /    \|  |  \\__  \  /    \_/ ___\/ __ \ / __ |  ______ \   __\|  | \__  \  /  ___/  |  \| __ \\__  \  /    \  / ___\ 
\  ___/|   |  \   Y  \/ __ \|   |  \  \__\  ___// /_/ | /_____/  |  |  |  |__/ __ \_\___ \|   Y  \ \_\ \/ __ \|   |  \/ /_/  >
 \___  >___|  /___|  (____  /___|  /\___  >___  >____ |          |__|  |____(____  /____  >___|  /___  (____  /___|  /\___  / 
     \/     \/     \/     \/     \/     \/    \/     \/                          \/     \/     \/    \/     \/     \//_____/  

Written by:

Jarvis
	Malcolm
     &
		Paxton

*/

// Arduino code to switch relay
#define relay_pin 5
#define check 7

int command = 0;

void setup() {
	pinMode(relay_pin, OUTPUT);
	Serial.begin(9600);
}

void loop() {

	while (Serial.available() > 0){
		command = Serial.read();
	}

	if (check == command){
		digitalWrite(7, HIGH);
		delay(3000);
		digitalWrite(7, LOW);
	}

	command = 0;
}


/*


⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢠⣴⣶⣤⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣠⣸⣿⣿⡟⣀⣀⣀⣀⣀⣀⣀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣿⣿⣿⣿⣿⣿⣿⡿⣿⡿⠛⠛⠋⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⢀⣸⣿⣿⣿⣿⣿⣿⣿⣷⣿⠃⠀⠀⠀⠀⠀⠀⠀
⢠⣶⣶⣶⣶⣶⣶⡄⠀⢸⣿⣿⣿⣿⣿⣿⣧⠙⠛⠉⢠⣶⣶⣶⣶⣶⣶⡄
⢸⣿⣿⠛⠛⠛⠛⠃⠀⠐⣿⣿⣿⣿⣿⣿⡟⠀⠀⠀⢸⣿⡿⠛⠛⠛⠛⠃
⢸⣿⣿⠀⠀⠀⠀⠀⠀⢠⣿⣿⣿⣿⣿⣧⡀⠀⠀⠀⢸⣿⣿⣶⣶⣶⣶⡆
⢸⣿⣿⠀⠀⠀⠀⠀⠀⢸⣿⣿⡿⢿⣿⣿⣿⡀⠀⠀⠈⠛⠛⠛⠛⣿⣿⡇
⢸⣿⣿⣿⣿⣿⣿⡇⠀⢸⣿⣿⠁⠀⠘⢿⣿⣷⠀⠀⢸⣿⣿⣿⣿⣿⣿⡇
⠈⠉⠉⠉⠉⠉⠉⠁⢠⣿⡟⠁⠀⠀⠀⢠⣿⣿⠀⠀⠈⠉⠉⠉⠉⠉⠉⠁
⠀⠀⠀⠀⠀⠀⠀⢠⣿⣿⠃⠀⠀⠀⠀⠀⣿⣿⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⢸⣿⠉⠀⠀⠀⠀⠀⠀⣹⣿⡀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠸⠿⠀⠀⠀⠀⠀⠀⠀⠛⠛⠛⠃⠀⠀

Copyright (C)2022

*/