AsyncAPI is an evolving language. This repository contains the specification text as well as Pull Requests with suggested improvements and contributions.
Contributions that do not change the interpretation of the spec but instead improve legibility, fix editorial errors, clear up ambiguity and improve examples are encouraged and are often merged by a spec Committer with little process.
However, contributions that do meaningfully change the interpretation of the spec must follow an RFC (Request For Comments) process led by a champion through a series of stages intended to improve visibility, allow for discussion to reach the best solution, and arrive at consensus. This process becomes even more important as AsyncAPI's community broadens.
When proposing or weighing-in on any issue or pull request, consider the Code of Conduct to better understand expected and unacceptable behavior.
A common point of confusion for those who wish to contribute to AsyncAPI is where to start. In fact, you may have found yourself here after attempting to make an improvement to an AsyncAPI library. Should a new addition be made to the AsyncAPI spec first or an AsyncAPI library first? Admittedly, this can become a bit of a chicken-or-egg dilemma.
AsyncAPI libraries seek to be "spec compliant", which means they discourage changes that cause them to behave differently from the spec as written. However, they also encourage pull requests for changes that accompany an RFC proposal or RFC draft. In fact, a spec contribution RFC won't be accepted until it has experience being implemented in an AsyncAPI library.
To allow a library to remain spec compliant while also implementing proposals and drafts, the library's maintainers may request that these new features are disabled by default with opt-in option flags or they may simply wait to merge a well-tested pull request until the spec proposal is accepted.
AsyncAPI's evolution is guided by a few principles. Suggested contributions should use these principles to guide the details of an RFC and decisions to move forward.
-
Favor no change
As AsyncAPI is implemented in many languages under the collaboration of a lot of individuals, incorporating any change has a high cost. Accordingly, proposed changes must meet a very high bar of added value. The burden of proof is on the contributor to illustrate this value.
-
Enable new capabilities motivated by real use cases
Every change should intend on unlocking a real and reasonable use case. Real examples are always more compelling than theoretical ones, and common scenarios are more compelling than rare ones. RFCs should do more than offer a different way to reach an already achievable outcome.
-
Simplicity and consistency over expressiveness and terseness
"Possible but awkward" is often favored over more complex alternatives. Simplicity (e.g. fewer concepts) is more important than expressing more sophisticated ideas or writing less.
-
Preserve option value
It's hard to know what the future brings; whenever possible, decisions should be made that allow for more options in the future. Sometimes this is unintuitive: spec rules often begin more strict than necessary with a future option to loosen when motivated by a real use case.
-
Understandability is just as important as correctness
The AsyncAPI spec, despite describing technical behavior, is intended to be read by people. Use natural tone and include motivation and examples.
Contributing to AsyncAPI requires a lot of dedicated work. To set clear expectations and provide accountability, each proposed RFC (request for comments) must have a champion who is responsible for addressing feedback and completing next steps. An RFC may have multiple champions. The spec Committers are not responsible for completing RFCs which lack a champion (though a Committer may be a champion for an RFC).
An RFC which does not have a champion may not progress through stages, and can become stale. Stale proposals may be picked up by a new champion or may be rejected.
RFCs are guided by a champion through a series of stages: strawman, proposal, draft, and accepted (or rejected), each of which has suggested entrance criteria and next steps detailed below. RFCs typically advance one stage at a time, but may advance multiple stages at a time. Stage advancements occur on GitHub.
In general, it's preferable to start with a pull request so that we can best evaluate the RFC in detail. However, starting with an issue is also permitted if the full details are not worked out.
All RFCs start as either a strawman or proposal.
An RFC at the strawman stage captures a described problem or partially-considered solutions. A strawman does not need to meet any entrance criteria. A strawman's goal is to prove or disprove a problem and guide discussion towards either rejection or a preferred solution. A strawman may be an issue or a pull request (though an illustrative pull request is preferrable).
There is no entrance criteria for a Strawman
As implied by the name strawman, the goal at this stage is to knock it down (reject) by considering other possible related solutions, showing that the motivating problem can be solved with no change to the specification, or that it is not aligned with the guiding principles.
Once determined that the strawman is compelling, it should seek the entrance criteria for proposal.
An RFC at the proposal stage is a solution to a problem with enough fidelity to be discussed in detail. It must be backed by a willing champion. A proposal's goal is to make a compelling case for acceptance by describing both the problem and the solution via examples and spec edits. A proposal should be a pull request.
Entrance criteria:
- Identified champion
- Clear explanation of problem and solution
- Illustrative examples
- Incomplete spec edits
- Identification of potential concerns, challenges, and drawbacks
A proposal is subject to the same discussion as a strawman: ensuring that it is well aligned with the guiding principles, is a problem worth solving, and is the preferred solution to that problem. A champion is not expected to have confidence in every detail at this stage and should instead focus on identifying and resolving issues and edge-cases. To better understand the technical ramifications of the proposal, a champion is encouraged to implement it in a AsyncAPI library.
Most proposals are expected to evolve or change and may be rejected. Therefore, it is unwise to rely on a proposal in a production environment. AsyncAPI libraries may implement proposals, though are encouraged to not enable the proposed feature without explicit opt-in.
An RFC at the draft stage is a fully formed solution. There is consensus the problem identified should be solved, and this particular solution is preferred. A draft's goal is to precisely and completely describe the solution and resolve any concerns through library implementations. A draft must be a pull request.
Entrance criteria:
- Consensus the solution is preferred
- Resolution of identified concerns and challenges
- Precisely described with spec edits
- Compliant implementation in the AsyncAPI JS Parser and the AsyncAPI JSON Schema (might not be merged)
A proposal becomes a draft when the set of problems or drawbacks have been fully considered and accepted or resolved, and the solution is deemed desirable. A draft's goal is to complete final spec edits that are ready to be merged and implement the draft in AsyncAPI libraries along with tests to gain confidence that the spec text is sufficient.
Drafts may continue to evolve and change, occasionally dramatically, and are not guaranteed to be accepted. Therefore, it is unwise to rely on a draft in a production environment. AsyncAPI libraries should implement drafts to provide valuable feedback, though are encouraged not to enable the draft feature without explicit opt-in when possible.
An RFC at the accepted stage is a completed solution. According to a spec Committer it is ready to be merged as-is into the spec document. The RFC is ready to be deployed in AsyncAPI libraries. An accepted RFC must be implemented in the AsyncAPI JS Parser and the AsyncAPI JSON Schema.
Entrance criteria:
- Consensus the solution is complete
- Complete spec edits, including examples and prose
- Compliant implementation in the AsyncAPI JS Parser and the AsyncAPI JSON Schema (fully tested and merged or ready to merge)
A draft is accepted when the Committers have been convinced via implementations and tests that it appropriately handles all edge cases; that the spec changes not only precisely describe the new syntax and semantics but include sufficient motivating prose and examples; and that the RFC includes edits to any other affected areas of the spec. Once accepted, its champion should encourage adoption of the RFC by opening issues or pull requests on other popular AsyncAPI libraries.
An accepted RFC is merged into the AsyncAPI spec's master branch by a Committer and will be included in the next released revision.
An RFC may be rejected at any point and for any reason. Most rejections occur when a strawman is proven to be unnecessary, is misaligned with the guiding principles, or fails to meet the entrance criteria to become a proposal. A proposal may become rejected for similar reasons as well as if it fails to reach consensus or loses the confidence of its champion. Likewise a draft may encounter unforeseen issues during implementations which cause it to lose consensus or the confidence of its champion.
RFCs which have lost a champion will not be rejected immediately, but may become rejected if they fail to attract a new champion.
Once rejected, an RFC will typically not be reconsidered. Reconsideration is possible if a champion believes the original reason for rejection no longer applies due to new circumstances or new evidence.
A champion is anyone who leads the work on an RFC. It doesn't mean it has to be the only person working on it though. They are a "person of reference" for a given RFC implementation and may or may not know about JS, relying on the help of other community members to implement the RFC on the AsyncAPI JS Parser and the AsyncAPI JSON Schema.
This document was adapted from the GraphQL Specification Contribution Guide.