Skip to content

Latest commit

 

History

History
58 lines (45 loc) · 1.6 KB

README.md

File metadata and controls

58 lines (45 loc) · 1.6 KB
Raw

pyZNodeEditor

A monitor/editor for ZOCP nodes, implemented in PySide (Python/Qt4). ZOCP is the Z25 Orchestration Control Protocol, currently in development at z25.org. For more information see https://github.com/z25/pyZOCP

Installation Notes

pyZNodeEditor depends on the python implementation of ZOCP. You must first install pyZOCP: https://github.com/z25/pyZOCP/blob/master/README.textile To get the pyNodeEditor up and running you need to install the following:

The instructions below all assume you have Python 3 and pyZOCP already installed.

Installation on Debian/Ubuntu

  1. Install PySide:
sudo apt-get install python3-pyside

Installation on Windows

  1. Install PySide:
pip install PySide

Installation on OSX

To use PySide on OSX you also need to install QT version 4.6 or better (Qt 5.x is currently not supported)

  1. Download and install QT (http://download.qt.io/archive/qt/4.8/4.8.6/)
  2. Install PySide:
pip3 install PySide

Running pyZNodeEditor

python3 zne.py

Note: the node editor is useless by itself. It needs to run alongside one or more ZOCP nodes. ZOCP nodes can not be created using the editor.

pyQNodesEditor

pyZNodeEditor is based on a Python port of ALGOholic's QNodesEditor See ALGOholic for more information: http://algoholic.eu/qnodeseditor-qt-nodesports-based-data-processing-flow-editor/ The original port can be found here: https://github.com/fieldOfView/pyQNodesEditor