diff --git a/src/main/target/TAKERF722SE/CMakeLists.txt b/src/main/target/TAKERF722SE/CMakeLists.txt
new file mode 100644
index 00000000000..c4716f616ee
--- /dev/null
+++ b/src/main/target/TAKERF722SE/CMakeLists.txt
@@ -0,0 +1 @@
+target_stm32f722xe(TAKERF722SE)
\ No newline at end of file
diff --git a/src/main/target/TAKERF722SE/target.c b/src/main/target/TAKERF722SE/target.c
new file mode 100644
index 00000000000..247efb84e52
--- /dev/null
+++ b/src/main/target/TAKERF722SE/target.c
@@ -0,0 +1,48 @@
+/*
+* This file is part of INAV Project.
+*
+* INAV is free software: you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation, either version 3 of the License, or
+* (at your option) any later version.
+*
+* INAV is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with INAV. If not, see .
+*/
+
+#include
+
+#include "platform.h"
+#include "drivers/io.h"
+
+#include "drivers/dma.h"
+#include "drivers/timer.h"
+#include "drivers/timer_def.h"
+
+
+
+
+
+timerHardware_t timerHardware[] = {
+
+ DEF_TIM(TIM3, CH1, PB4, TIM_USE_OUTPUT_AUTO, 0, 0),
+ DEF_TIM(TIM3, CH2, PB5, TIM_USE_OUTPUT_AUTO, 0, 0),
+ DEF_TIM(TIM3, CH3, PB0, TIM_USE_OUTPUT_AUTO, 0, 0),
+ DEF_TIM(TIM3, CH4, PB1, TIM_USE_OUTPUT_AUTO, 0, 0),
+
+ DEF_TIM(TIM4, CH1, PB6, TIM_USE_OUTPUT_AUTO, 0, 0),
+ DEF_TIM(TIM4, CH2, PB7, TIM_USE_OUTPUT_AUTO, 0, 0),
+ DEF_TIM(TIM8, CH3, PC8, TIM_USE_OUTPUT_AUTO, 0, 0),
+ DEF_TIM(TIM8, CH4, PC9, TIM_USE_OUTPUT_AUTO, 0, 0),
+
+ DEF_TIM(TIM1, CH1, PA8, TIM_USE_LED, 0, 0),
+};
+
+const int timerHardwareCount = sizeof(timerHardware) / sizeof(timerHardware[0]);
+
+
diff --git a/src/main/target/TAKERF722SE/target.h b/src/main/target/TAKERF722SE/target.h
new file mode 100644
index 00000000000..61ab442653d
--- /dev/null
+++ b/src/main/target/TAKERF722SE/target.h
@@ -0,0 +1,186 @@
+/*
+ * This file is part of INAV Project.
+ *
+ * Cleanflight is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * INAV is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with INAV. If not, see .
+ */
+
+#pragma once
+
+#define TARGET_BOARD_IDENTIFIER "GEPR"
+
+#define USBD_PRODUCT_STRING "TAKERF722SE"
+
+#define LED0 PC14
+
+
+// *************** BEEPER ************************
+
+#define BEEPER PC13
+#define BEEPER_INVERTED
+
+
+// *************** LEDSTRIP ************************
+#define USE_LED_STRIP
+#define WS2811_PIN PA8
+
+
+// *************** UART *****************************
+#define USE_VCP
+
+#define USE_UART1
+#define UART1_TX_PIN PA9
+#define UART1_RX_PIN PA10
+
+#define USE_UART2
+#define UART2_TX_PIN PA2
+#define UART2_RX_PIN PA3
+
+#define USE_UART3
+#define UART3_TX_PIN PB10
+#define UART3_RX_PIN PB11
+
+#define USE_UART4
+#define UART4_TX_PIN PA0
+#define UART4_RX_PIN PA1
+
+#define USE_UART5
+#define UART5_TX_PIN PC12
+#define UART5_RX_PIN PD2
+
+#define USE_UART6
+#define UART6_TX_PIN PC6
+#define UART6_RX_PIN PC7
+
+
+#define SERIAL_PORT_COUNT 7
+
+#define DEFAULT_RX_TYPE RX_TYPE_SERIAL
+#define SERIALRX_PROVIDER SERIALRX_SBUS
+#define SERIALRX_UART SERIAL_PORT_USART2
+
+
+// *************** SPI Bus **********************
+
+#define USE_SPI
+
+#define USE_SPI_DEVICE_1
+#define SPI1_SCK_PIN PA5
+#define SPI1_MISO_PIN PA6
+#define SPI1_MOSI_PIN PA7
+
+#define USE_SPI_DEVICE_2
+#define SPI2_SCK_PIN PB13
+#define SPI2_MISO_PIN PB14
+#define SPI2_MOSI_PIN PB15
+
+#define USE_SPI_DEVICE_3
+#define SPI3_SCK_PIN PC10
+#define SPI3_MISO_PIN PC11
+#define SPI3_MOSI_PIN PB2
+#define SPI3_SCK_AF GPIO_AF6_SPI3
+#define SPI3_MISO_AF GPIO_AF6_SPI3
+#define SPI3_MOSI_AF GPIO_AF7_SPI3
+
+
+// *************** Gyro & ACC **********************
+
+#define USE_IMU_MPU6000
+#define IMU_MPU6000_ALIGN CW0_DEG
+#define MPU6000_CS_PIN PA4
+#define MPU6000_SPI_BUS BUS_SPI1
+
+
+#define USE_IMU_ICM42605
+#define IMU_ICM42605_ALIGN CW0_DEG
+#define ICM42605_CS_PIN PA4
+#define ICM42605_SPI_BUS BUS_SPI1
+
+// *************** I2C/Baro/Mag *********************
+#define USE_I2C
+#define USE_I2C_DEVICE_1
+#define I2C1_SCL PB8
+#define I2C1_SDA PB9
+
+
+//***************************************************
+#define USE_BARO
+#define BARO_I2C_BUS BUS_I2C1
+#define USE_BARO_BMP280
+#define USE_BARO_DPS310
+#define USE_BARO_MS5611
+
+#define USE_MAG
+#define MAG_I2C_BUS BUS_I2C1
+#define USE_MAG_HMC5883
+#define USE_MAG_QMC5883
+#define USE_MAG_IST8310
+#define USE_MAG_IST8308
+
+#define TEMPERATURE_I2C_BUS BUS_I2C1
+
+#define PITOT_I2C_BUS BUS_I2C1
+
+#define USE_RANGEFINDER
+#define RANGEFINDER_I2C_BUS BUS_I2C1
+#define BNO055_I2C_BUS BUS_I2C1
+
+// *************** FLASH **************************
+
+#define USE_FLASHFS
+
+#define USE_FLASH_M25P16
+#define M25P16_CS_PIN PA15
+#define M25P16_SPI_BUS BUS_SPI3
+
+#define ENABLE_BLACKBOX_LOGGING_ON_SPIFLASH_BY_DEFAULT
+
+// *************** OSD *****************************
+
+#define USE_MAX7456
+#define MAX7456_SPI_BUS BUS_SPI2
+#define MAX7456_CS_PIN PB12
+
+// *************** ADC *****************************
+
+#define USE_ADC
+#define ADC_INSTANCE ADC1
+#define ADC1_DMA_STREAM DMA2_Stream0
+#define ADC_CHANNEL_1_PIN PC3
+#define ADC_CHANNEL_2_PIN PC0
+#define ADC_CHANNEL_3_PIN PC2
+
+#define VBAT_ADC_CHANNEL ADC_CHN_1
+#define RSSI_ADC_CHANNEL ADC_CHN_2
+#define CURRENT_METER_ADC_CHANNEL ADC_CHN_3
+
+
+#define DEFAULT_FEATURES (FEATURE_TX_PROF_SEL | FEATURE_CURRENT_METER | FEATURE_TELEMETRY | FEATURE_VBAT | FEATURE_OSD | FEATURE_BLACKBOX)
+
+
+
+
+//**************************************************
+
+#define USE_SERIAL_4WAY_BLHELI_INTERFACE
+
+#define TARGET_IO_PORTA 0xffff
+#define TARGET_IO_PORTB 0xffff
+#define TARGET_IO_PORTC 0xffff
+#define TARGET_IO_PORTD (BIT(2))
+
+
+#define MAX_PWM_OUTPUT_PORTS 8
+
+#define USE_DSHOT
+#define USE_ESC_SENSOR