MiNiFi is a child project effort of Apache NiFi. This repository is for a native implementation in C++.
Apache NiFi - MiNiFi C++ is a complementary data collection approach that supplements the core tenets of NiFi in dataflow management, focusing on the collection of data at the source of its creation. The C++ implementation is an additional implementation to the one in Java with the aim of an even smaller resource footprint.
Specific goals for MiNiFi comprise:
- small and lightweight footprint
- central management of agents
- generation of data provenance
- integration with NiFi for follow-on dataflow management and full chain of custody of information
Perspectives of the role of MiNiFi should be from the perspective of the agent acting immediately at, or directly adjacent to, source sensors, systems, or servers.
A subset of the Apache NiFi Expression Language is supported.
MiNiFi - C++ supports the following C++ processors:
The following table lists the base set of processors.
| Extension Set | Processors |
|---|---|
| Base | AppendHostInfo ExecuteProcess ExtractText GenerateFlowFile GetFile GetTCP HashContent ListenSyslog LogAttribute PutFile RetryFlowFile RouteOnAttribute TailFile UpdateAttribute |
The next table outlines CMAKE flags that correspond with MiNiFi extensions. Extensions that are enabled by default ( such as CURL ), can be disabled with the respective CMAKE flag on the command line.
Through JNI extensions you can run NiFi processors using NARs. The JNI extension set allows you to run these Java processors. MiNiFi C++ will favor C++ implementations over Java implements. In the case where a processor is implemented in either language, the one in C++ will be selected; however, will remain transparent to the consumer.
| Extension Set | Processors | CMAKE Flag |
|---|---|---|
| Archive Extensions | ApplyTemplate CompressContent ManipulateArchive MergeContent FocusArchiveEntry UnfocusArchiveEntry |
-DBUILD_LIBARCHIVE=ON |
| AWS | AWSCredentialsService PutS3Object DeleteS3Object FetchS3Object ListS3 |
-DENABLE_AWS=ON |
| Azure | AzureStorageCredentialsService PutAzureBlobStorage PutAzureDataLakeStorage |
-DENABLE_AZURE=ON |
| CivetWeb | ListenHTTP | -DDISABLE_CIVET=ON |
| CURL | InvokeHTTP | -DDISABLE_CURL=ON |
| GPS | GetGPS | -DENABLE_GPS=ON |
| Kafka | PublishKafka | -DENABLE_LIBRDKAFKA=ON |
| JNI | NiFi Processors | -DENABLE_JNI=ON |
| MQTT | ConsumeMQTT PublishMQTT |
-DENABLE_MQTT=ON |
| OPC | FetchOPCProcessor | -DENABLE_OPC=ON |
| OpenCV | CaptureRTSPFrame | -DENABLE_OPENCV=ON |
| OpenWSMAN | SourceInitiatedSubscriptionListener | -DENABLE_OPENWSMAN=ON |
| PCAP | CapturePacket | -DENABLE_PCAP=ON |
| PDH (Windows only) | PerformanceDataMonitor | -DENABLE_PDH=ON |
| Scripting | ExecuteScript Custom Python Processors |
-DENABLE_SCRIPTING=ON |
| Sensors | GetEnvironmentalSensors GetMovementSensors |
-DENABLE_SENSORS=ON |
| SFTP | FetchSFTP ListSFTP PutSFTP |
-DENABLE_SFTP=ON |
| SQL | ExecuteSQL PutSQL QueryDatabaseTable |
-DENABLE_SQL=ON |
| Systemd | ConsumeJournald | -DENABLE_SYSTEMD=ON |
| Tensorflow | TFApplyGraph TFConvertImageToTensor TFExtractTopLabels |
-DENABLE_TENSORFLOW=ON |
| USB Camera | GetUSBCamera | -DENABLE_USB_CAMERA=ON |
| Windows Event Log (Windows only) | CollectorInitiatedSubscription ConsumeWindowsEventLog TailEventLog |
-DENABLE_WEL=ON |
Please see our Python guide on how to write Python processors and use them within MiNiFi C++.
- We follow semver with regards to API compatibility, but no ABI compatibility is provided. See semver's website for more information
- Build and usage currently only supports Windows, Linux and OS X environments. MiNiFi C++ can be built and run through the Windows Subsystem for Linux but we provide no support for this platform.
- Provenance events generation is supported and are persisted using RocksDB. Volatile repositories can be used on systems without persistent storage.
- If MiNiFi C++ is built with the OPC-UA extension enabled, it bundles open62541, which is available under the Mozilla Public License Version 2.0, a Category B license under ASF 3rd party license policy.
- If MiNiFi C++ packaged on Windows, the resulting MSI may not be publicly redistributed under the Apache license, because it contains Microsoft redistributable DLLs, which fall under Category X of the ASF 3rd party license policy.
- CMake 3.16 or greater
- gcc 8 or greater
- bison 3.0.x+ (3.2 has been shown to fail builds)
- flex 2.6 or greater
The following utilities are needed to build external projects, when bundled versions of LibreSSL, cURL, or zlib are used:
- patch
- autoconf
- automake
- libtool
NOTE if Expression Language support is enabled, FlexLexer must be in the include path and the version must be compatible with the version of flex used when generating lexer sources. On Mac OS X and FreeBSD, make sure that the system version is overridden with the correct flex version, which may require merging your CPPFLAGS into CFLAGS and CXXFLAGS. Lexer source generation is automatically performed during CMake builds. To re-generate the sources, remove:
- extensions/expression-language/Parser.cpp
- extensions/expression-language/Parser.hpp
- extensions/expression-language/Scanner.cpp
- extensions/expression-language/location.hh
- extensions/expression-language/position.hh
- extensions/expression-language/stack.hh
and rebuild.
- libcurl-openssl (If not available or desired, NSS will be used)
- libuuid and uuid-dev
- openssl
- Python 3 and development headers -- Required, unless Python support is disabled
- Lua and development headers -- Optional, unless Lua support is enabled
- libgps-dev -- Required if building libGPS support
- Zlib headers
Additional environmental preparations are required for CentOS 7 support. Before building, install and enable the devtoolset-10 SCL:
$ sudo yum install centos-release-scl
$ sudo yum install devtoolset-10
$ scl enable devtoolset-10 bash
Finally, it is required to add the -lrt compiler flag by using the
-DCMAKE_CXX_FLAGS=-lrt flag when invoking cmake.
On all distributions please use -DUSE_SHARED_LIBS=OFF to statically link zlib, libcurl, and OpenSSL.
Build and Installation has been tested with Windows 10 using Visual Studio 2019. You can build and create an MSI via the CPACK command. This requires the installation of the WiX toolset (http://wixtoolset.org/). To do this, open up a prompt into your build directory and type 'cpack' . The CPACK command will automatically generate and provide you a path to the distributable msi file. See Windows.md for more details.
- libuuid
- librocksdb (built and statically linked)
- libcurl-openssl (If not available or desired, NSS will be used)
- libssl and libcrypto from libressl (built and statically linked)
- libarchive (built and statically linked)
- librdkafka (built and statically linked)
- Python 3 -- Required, unless Python support is disabled
- Lua -- Optional, unless Lua support is enabled
- libusb -- Optional, unless USB Camera support is enabled
- libpng -- Optional, unless USB Camera support is enabled
- libpcap -- Optional, unless ENABLE_PCAP specified
The needed dependencies can be installed with the following commands for:
NOTE it is recommended to use the newest compiler using the latest devtoolset-/gcc-toolset-/llvm-toolset-* packages from the Software Collections (SCL).
# ~/Development/code/apache/nifi-minifi-cpp on git:master
dnf install cmake \
gcc gcc-c++ \
git \
bison \
flex \
patch \
autoconf \
automake \
libtool \
libuuid libuuid-devel \
boost-devel \
openssl-devel \
bzip2-devel \
xz-devel \
doxygen \
zlib-devel
# (Optional) for building Python support
dnf install python36-devel
# (Optional) for building Lua support
dnf install lua-devel
# (Optional) for building USB Camera support
dnf install libusb-devel libpng-devel
# (Optional) for building docker image
dnf install docker
# (Optional) for system integration tests
dnf install docker python-virtualenv
# If building with GPS support
dnf install gpsd-devel
# (Optional) for PacketCapture Processor
dnf install libpcap-devel
# ~/Development/code/apache/nifi-minifi-cpp on git:master
apt install cmake \
gcc g++ \
git \
bison \
flex \
patch \
ca-certificates \
autoconf \
automake \
libtool \
libcurl4-openssl-dev \
uuid-dev uuid \
libboost-all-dev libssl-dev \
libbz2-dev liblzma-dev \
doxygen \
zlib1g-dev
# (Optional) for building Python support
apt install libpython3-dev
# (Optional) for building Lua support
apt install liblua5.1-0-dev
# (Optional) for building USB Camera support
apt install libusb-1.0.0-0-dev libpng12-dev
# (Optional) for building docker image
apt install docker.io
# (Optional) for system integration tests
apt install docker.io python-virtualenv
# (Optional) If building with GPS support
apt install libgps-dev
# (Optional) for PacketCapture Processor
apt install libpcap-dev
# ~/Development/code/apache/nifi-minifi-cpp on git:master
brew install cmake \
flex \
patch \
autoconf \
automake \
libtool \
ossp-uuid \
boost \
openssl \
python \
lua \
xz \
bzip2 \
doxygen \
zlib
brew install curl
brew link curl --force
# (Optional) for building USB Camera support
brew install libusb libpng
# (Optional) for building docker image/running system integration tests
# Install docker using instructions at https://docs.docker.com/docker-for-mac/install/
sudo pip install virtualenv
# If building with GPS support
brew install gpsd
# (Optional) for PacketCapture Processor
sudo brew install libpcap
# It is recommended that you install bison from source as HomeBrew now uses an incompatible version of Bison
-
MiNiFi C++ offers a bootstrap script in the root of our github repo that will boot strap the cmake and build process for you without the need to install dependencies yourself. To use this process, please run the command
boostrap.shfrom the root of the MiNiFi C++ source tree. -
Per the table, below, you will be presented with a menu guided bootstrap process. You may enable and disable extensions ( further defined below ). Once you are finished selecting the features you wish to build, enter P to continue with the process. CMAKE dependencies will be resolved for your distro. You may enter command line options -n to force yes to all prompts ( including the package installation prompts ) and -b to automatically run make once the cmake process is complete. Alternatively, you may include the package argument to boostrap, -p, which will run make package.
-
If you provide -b or -p to bootstrap.sh, you do not need to follow the Building section, below. If you do not provide these arguments you may skip the cmake .. section from Building.
-
Using the Release build profile is recommended to reduce binary size. (~200 MB vs ~30 MB)
# ~/Development/code/apache/nifi-minifi-cpp on git:master $ ./bootstrap.sh # CMAKE Build dir exists, should we overwrite your build directory before we begin? If you have already bootstrapped, bootstrapping again isn't necessary to run make [ Y/N ] Y ***************************************** Select MiNiFi C++ Features to toggle. **************************************** A. Persistent Repositories .....Enabled B. libcurl features ...........Enabled C. libarchive features ........Enabled D. Execute Script support ......Enabled E. Expression Language support .Enabled F. Kafka support ...............Disabled G. PCAP support ................Disabled H. USB Camera support ..........Disabled I. GPS support .................Disabled J. TensorFlow Support ..........Disabled K. Bustache Support ............Disabled L. MQTT Support ................Disabled M. Python Support ..............Disabled N. COAP Support ................Enabled O. SFTP Support ................Disabled S. AWS Support .................Disabled T. OpenCV Support ..............Disabled U. OPC-UA Support ..............Disabled V. SQL Support .................Disabled W. Openwsman Support ...........Disabled X. Azure Support ...............Disabled Y. Systemd Support .............Enabled Z. NanoFi Support ..............Enabled **************************************** Build Options. **************************************** 1. Disable Tests ...............Disabled 2. Enable all extensions 3. Enable JNI Support ..........Disabled 4. Use Shared Dependency Links .Enabled 5. Build Profile ...............RelWithDebInfo Debug MinSizeRel Release 6. Create ASAN build ...........Disabled 7. Treat warnings as errors.....Disabled P. Continue with these options Q. Quit * Extension cannot be installed due to version of cmake or other software, or incompatibility with other extensions Enter choice [ A - Z or 1-7 ] -
Boostrap now saves state between runs. State will automatically be saved. Provide -c or --clear to clear this state. The -i option provides a guided menu install with the ability to change advanced features.
-
From your source checkout, create a directory to perform the build (e.g. build) and cd into that directory.
# ~/Development/code/apache/nifi-minifi-cpp on git:master $ mkdir build # ~/Development/code/apache/nifi-minifi-cpp on git:master $ cd build -
Perform a
cmake ..to generate the project files- Optionally disable or enable extensions. Please visit our guide extensions guide for flags or our wiki entry on customizing builds for more information on this topic.
# ~/Development/code/apache/nifi-minifi-cpp on git:master $ cmake .. ... -- Configuring done -- Generating done -- Build files have been written to: /Users/apiri/Development/code/apache/nifi-minifi-cpp/build -
Perform a build
# ~/Development/code/apache/nifi-minifi-cpp on git:master $ make -j$(nproc) Scanning dependencies of target gmock_main Scanning dependencies of target gmock Scanning dependencies of target minifi Scanning dependencies of target gtest Scanning dependencies of target yaml-cpp [ 1%] Building CXX object thirdparty/yaml-cpp-yaml-cpp-0.5.3/test/gmock-1.7.0/gtest/CMakeFiles/gtest.dir/src/gtest-all.cc.o [ 3%] Building CXX object thirdparty/yaml-cpp-yaml-cpp-0.5.3/test/gmock-1.7.0/CMakeFiles/gmock.dir/gtest/src/gtest-all.cc.o [ 3%] Building CXX object thirdparty/yaml-cpp-yaml-cpp-0.5.3/test/gmock-1.7.0/CMakeFiles/gmock.dir/src/gmock-all.cc.o [ 6%] Building CXX object thirdparty/yaml-cpp-yaml-cpp-0.5.3/test/gmock-1.7.0/CMakeFiles/gmock_main.dir/gtest/src/gtest-all.cc.o [ 6%] Building CXX object thirdparty/yaml-cpp-yaml-cpp-0.5.3/test/gmock-1.7.0/CMakeFiles/gmock_main.dir/src/gmock-all.cc.o [ 7%] Building CXX object libminifi/CMakeFiles/minifi.dir/src/Configure.cpp.o ... [ 97%] Linking CXX executable minifi [ 97%] Built target minifiexe [ 98%] Building CXX object thirdparty/yaml-cpp-yaml-cpp-0.5.3/test/CMakeFiles/run-tests.dir/node/node_test.cpp.o [100%] Linking CXX executable run-tests [100%] Built target run-tests -
Create a binary assembly located in your build directory with suffix -bin.tar.gz
~/Development/code/apache/nifi-minifi-cpp/build $ make package Run CPack packaging tool for source... CPack: Create package using TGZ CPack: Install projects CPack: - Install directory: ~/Development/code/apache/nifi-minifi-cpp CPack: Create package CPack: - package: ~/Development/code/apache/nifi-minifi-cpp/build/nifi-minifi-cpp-0.11.0-bin.tar.gz generated. -
Create a source assembly located in your build directory with suffix -source.tar.gz
~/Development/code/apache/nifi-minifi-cpp/build $ make package_source Run CPack packaging tool for source... CPack: Create package using TGZ CPack: Install projects CPack: - Install directory: ~/Development/code/apache/nifi-minifi-cpp CPack: Create package CPack: - package: ~/Development/code/apache/nifi-minifi-cpp/build/nifi-minifi-cpp-0.11.0-source.tar.gz generated. -
(Optional) Create a Docker image from the resulting binary assembly output from "make package".
~/Development/code/apache/nifi-minifi-cpp/build
$ make docker
NiFi-MiNiFi-CPP Version: 0.11.0
Current Working Directory: /Users/jdyer/Development/github/nifi-minifi-cpp/docker
CMake Source Directory: /Users/jdyer/Development/github/nifi-minifi-cpp
MiNiFi Package: nifi-minifi-cpp-0.11.0-bin.tar.gz
Docker Command: 'docker build --build-arg UID=1000 --build-arg GID=1000 --build-arg MINIFI_VERSION=0.11.0 --build-arg MINIFI_PACKAGE=nifi-minifi-cpp-0.11.0-bin.tar.gz -t apacheminificpp:0.11.0 .'
Sending build context to Docker daemon 777.2 kB
Step 1 : FROM alpine:3.5
---> 88e169ea8f46
Step 2 : MAINTAINER Apache NiFi <[email protected]>
...
Step 15 : CMD $MINIFI_HOME/bin/minifi.sh run
---> Using cache
---> c390063d9bd1
Successfully built c390063d9bd1
Built target docker
- (Optional) Execute system integration tests using the docker image built locally on a docker daemon running locally.
~/Development/code/apache/nifi-minifi-cpp/build
$ make docker-verify
If you have docker installed on your machine you can build for CentOS 7, Fedora 34, Ubuntu 18.04, Ubuntu 20.04, and Debian 10 via our make docker commands. The following table provides the command to build your distro and the output file in your build directory. Since the versions are limited ( except for Ubuntu ) we output the archive based on the distro's name.
| Distro | command | Output File |
|---|---|---|
| CentOS 7 | make centos | nifi-minifi-cpp-centos-$VERSION-bin.tar.gz |
| Debian 10 (buster) | make debian | nifi-minifi-cpp-debian-$VERSION-bin.tar.gz |
| Fedora 34 | make fedora | nifi-minifi-cpp-fedora-$VERSION-bin.tar.gz |
| Ubuntu 18.04 (bionic) | make u18 | nifi-minifi-cpp-bionic-$VERSION-bin.tar.gz |
| Ubuntu 20.04 (focal) | make u20 | nifi-minifi-cpp-focal-$VERSION-bin.tar.gz |
You can avoid the requirement of an up-to-date compiler when generating the build system by adding -DDOCKER_BUILD_ONLY=ON to the cmake command line. This disables all cmake targets except the docker build and test ones.
Snapcraft builds are supported. As per Snapcraft's official recommendations, we recommend using Ubuntu 16.04 as a build system when building the Snap. To build the snap, run
$ snapcraft
from the project directory. Further instructions are available in the Snapcraft documentation.
After building MiNiFi C++, extract the generated binary package 'nifi-minifi-cpp-$VERSION-bin.tar.gz' at your desired installation path.
$ MINIFI_PACKAGE="$(pwd)"/build/nifi-minifi-cpp-*-bin.tar.gz
$ pushd /opt
$ sudo tar xvzf "$MINIFI_PACKAGE"
$ cd nifi-minifi-cpp-*The 'conf' directory in the installation root contains a template config.yml document, minifi.properties, and minifi-log.properties. Please see our Configuration document for details on how to configure agents.
After completing the installation, the application can be run by issuing the following command from the installation directory:
$ ./bin/minifi.sh start
By default, this will make use of a config.yml located in the conf directory. This configuration file location can be altered by adjusting the property nifi.flow.configuration.file in minifi.properties located in the conf directory.
MiNiFi can then be stopped by issuing:
$ ./bin/minifi.sh stop
MiNiFi can also be installed as a system service using minifi.sh with an optional "service name" (default: minifi)
$ ./bin/minifi.sh install [service name]
MiNiFi C++ comes with a deployment script. This will build and package minifi. Additionally, a file named build_output will be created within the build directory that contains a manifest of build artifacts.
$ deploy.sh <build identifier>
The build identifier will be carried with the deployed binary for the configuration you specify. By default all extensions will be built.
On Windows it is suggested that MSI be used for installation.
Remove the build directory created above.
# ~/Development/code/apache/nifi-minifi-cpp on git:master
$ rm -rf ./build
Please see Extensions.md on how to build and run conditionally built dependencies and extensions.
For securing a MiNiFi agent's configuration files it comes with a tool called encrypt-config. Its documentation is available here.
Antivirus software can take a long time to scan directories and the files within them. Additionally, if the antivirus software locks files or directories during a scan, those resources are unavailable to MiNiFi processes, causing latency or unavailability of these resources in a MiNiFi instance. To prevent these performance and reliability issues from occurring, it is highly recommended to configure your antivirus software to skip scans on the following MiNiFi C++ directories:
- content_repository
- flowfile_repository
- provenance_repository
See our operations documentation for additional information on how to manage instances
See https://issues.apache.org/jira/projects/MINIFICPP/issues for the issue tracker.
See https://nifi.apache.org/minifi for the latest documentation.
See our examples page for flow examples.
See our Contribution Guide.
Except as otherwise noted this software is licensed under the Apache License, Version 2.0
For additional information regarding the source of included projects and the corresponding licenses, you may visit the following website
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.