HPMicro-HPM6E00EVK.yaml

board:
  buy_url_cn: http://www.hpmicro.com
  buy_url_global: http://www.hpmicro.com
  debug_interface: JTAG
  debugger: FT2232
  description_en: The HPM6E00 is a dual-core MCU running 600MHz. It has a 2MB continuous on-chip ram. The HPM6E00EVK provides a series of interfaces for the characteristic peripherals of the HPM6E00 series microcontrollers, including an ADC input SMA interface, a SDM input SMA interface, a motor control interface, a ABZ interface, a RS485/422 interface, a Ethernet interface, two EtherCAT interfaces, a PPI/FEMC interface, a rapberry interface. The HPM6E00EVK integrates an on-board debugger.
  description_zh: HPM6E00是一款运行于600MHz的双核MCU。它有一个2MB的连续片上ram。HPM6E00EVK为HPM6E00系列微控制器的特色外设提供了一系列接口，包括ADC输入SMA接口、SDM输入SMA接口，电机控制接口、ABZ接口、RS485/422接口、Ethernet接口、两个EtherCAT接口、一个PPI/FEMC接口和一个树莓派接口。HPM6E00EVK集成了一个板载调试器。
  emulator_machine: ''
  large_image: documents/images/board_6e00evk_large.png
  name: HPM6E00EVK
  price_cn: 498.00 CNY
  price_global: 76.00 USD
  sale_contact_cn: http://www.hpmicro.com/
  sale_contact_global: http://www.hpmicro.com/
  small_image: documents/images/board_6e00evk_small.png
  vendor: HPMicro
  version: Rev.B
chip:
  chip_name: HPM6E80
  clock_source: HSE
  device_vendor: HPMicro
  family_name: HPM6E00
  rx_name: PA01
  series_name: HPM6E00
  source_freq: '24000000'
  sub_series_name: HPM6E00
  target_freq: '6000000000'
  tx_name: PA00
  uart_name: UART0

docs:
- category: manual
  file: documents/manuals/HPM6E00EVK_UG_V1.0.pdf
  title: HPM6E00EVK Quick Start Guide
- category: sheet
  file: documents/sheet/HPM6E00_DS_V0_6.pdf
  title: HPM6E00 Datasheet
features:
- 'MCU: HPM6E80 MCU (600MHz, 2MB SRAM)'
- 'On-Board 16MB Quad SPI NOR Flash'
- 'Buttons: 4, RESET, WKUP, KEYA, KEYB'
- 'Debug Interface: 20-PIN JTAG interface'
- 'On-board Ethernet: 1000Mbps PHY x1'
- 'Ethercat: 2 port'
- 'USB: USB type C (USB 2.0 OTG) connector x1'
- 'Audio: Line in, Mic, Speaker, DAO'
- 'AD sensor: NSI1306W25'
- 'Others:RS422, RS485, RGB LED, CANFD'
features_zh:
- 'MCU: HPM6E80 微控制器 (主频600Mhz, 2M片上SRAM)'
- '按键： 4, RESET, WKUP, KEYA, KEYB'
- '板载 16MB Quad SPI NOR Flash'
- '调试接口: 20-PIN JTAG接口'
- '板载以太网: 1000Mbps PHY x1'
- 'USB: USB type C (USB 2.0 OTG) connector x1'
- '音频: Line in, Mic, Speaker, DAO'
- '模拟采样: NSI1306W25'
- '其他: RS422, RS485, RGB LED, CANFD'

pkg_type: Board_Support_Packages
pkg_vendor: HPMicro
pkg_version: 1.6.0

template_projects:
- project_name: blink_led
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/blink_led
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []

example_projects:
- project_name: adc_example
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/adc_example
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - packages
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: blink_led
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/blink_led
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: ethernet_demo
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/ethernet_demo
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - packages
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: ethernet_ptp_master_demo
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/ethernet_ptp_master_demo
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - packages
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: ethernet_ptp_slave_demo
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/ethernet_ptp_slave_demo
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - packages
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: flashdb_demo
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/flashdb_demo
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - packages
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: mcan_example
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/mcan_example
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: pwm_demo
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/pwm_demo
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: timer_demo
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/timer_demo
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: uart_dma_demo
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/uart_dma_demo
    target_path_offset: ''
    files_and_folders:
    - .config
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: usb_device_generic_hid
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/usb_device_generic_hid
    target_path_offset: ''
    files_and_folders:
    - .config
    - .config.old
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - packages
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
- project_name: usb_host_msc_udisk
  project_description: create this project if user choose rt-thread project
  project_type: rt-thread|@full|@5.0.2
  builtin_files:
  - source_path_offset: projects/usb_host_msc_udisk
    target_path_offset: ''
    files_and_folders:
    - .config
    - .config.old
    - .cproject
    - .project
    - .settings
    - applications
    - Kconfig
    - packages
    - README.md
    - rtconfig.h
    - rtconfig.py
    - rtconfig_preinc.h
    - SConscript
    - SConstruct
  - source_path_offset: 'common'
    target_path_offset: ''
    files_and_folders:
    - libraries
    - rt-thread
    - startup
  - source_path_offset: ''
    target_path_offset: ''
    files_and_folders:
    - board
  external_files:
  - package_name: RISC-V-GCC-RV32
    package_type: ToolChain_Support_Packages
    package_vendor: RISC-V
    package_version: '2022-04-12'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: OpenOCD-HPMicro
    package_type: Debugger_Support_Packages
    package_vendor: HPMicro
    package_version: '0.4.0'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []
  - package_name: J-Link
    package_type: Debugger_Support_Packages
    package_vendor: SEGGER
    package_version: 'v7.96q'
    source_path_offset: ''
    target_path_offset: ''
    files_and_folders: []

yaml_version: 3