Cozytouch hardware is not supported by overkiz core integration

[weber8thomas]

The problem

As ha-tahoma is deprecated (https://github.com/iMicknl/ha-tahoma), I tried to setup overkiz core integration but encountered the following issue:

Your CozyTouch hardware is not supported by this integration. (Votre matériel CozyTouch n'est pas pris en charge par cette intégration.)

What version of Home Assistant Core has the issue?

Home Assistant 2023.6.1

What was the last working version of Home Assistant Core?

Home Assistant 2023.5.4

What type of installation are you running?

Home Assistant OS

Integration causing the issue

overkiz

Link to integration documentation on our website

No response

Diagnostics information

No response

Example YAML snippet

No response

Anything in the logs that might be useful for us?

No response

Additional information

No response

[ayu69]

Hello,

Same issue, with sauter hardware.
With ha-tahoma i have a translation error, and i try to migrate to the official version but same error

[hpommier]

Hi,

Same problem here with Sauter Cozytouch hardware.

Thanks,

[gogui63]

Same issue with home assistant 2023.6.2.
I tried to use core integration after some errors with custom components

[weber8thomas]

Up please

[tibzz42]

Hi,

Same problem here with Sauter Cozytouch hardware and 2023.6.2 :(

Thanks,

[MindFreeze]

Same for Atlantic Water Heater. Was showing up as DWRP Actuator before

[home-assistant]

Hey there @iMicknl, @vlebourl, @tetienne, @nyroDev, mind taking a look at this issue as it has been labeled with an integration (overkiz) you are listed as a code owner for? Thanks!

Code owner commands

Code owners of overkiz can trigger bot actions by commenting:

• @home-assistant close Closes the issue.
• @home-assistant rename Awesome new title Renames the issue.
• @home-assistant reopen Reopen the issue.
• @home-assistant unassign overkiz Removes the current integration label and assignees on the issue, add the integration domain after the command.

_{^{(message by CodeOwnersMention)}}

---

overkiz documentation
overkiz source
_{^{(message by IssueLinks)}}

[iMicknl]

Sorry for the late response, the original issue did not contain the information so I would be notified of this issue.

First thing, please stop adding just 'up' and 'me too' comments without adding any additional information. It is clear that multiple people face the same issue, but I will need more details to figure this out. If anyone can work on Discord (_imick) with me, that would speed up the development.

• Was your hardware supported before in ha-tahoma?

• Was your hardware supported before in core?

• Did your issue occur after an update of your hub?

• Did your issue occur after an update of Home Assistant?

• If you are using the core integration, are you sure that you have removed the custom_component and the folder ha-tahoma?

The issue here is that CozyTouch is using multiple platforms, the Overkiz platform and another platform, with the same login system. This is the reason that we had to add Your CozyTouch hardware is not supported by this integration. to the integration. It seems they made changes again which we need to incorporate...

[weber8thomas]

Custom component and core integration are both working again