DSMR Slimme Meter Landis/Gyr E360 data missing #68472
Comments
|
dsmr documentation |
|
Hey there @RobBie1221, @frenck, mind taking a look at this issue as it has been labeled with an integration ( |
|
I havo also an issue with the Landis Gyr E360 It is not possible to add the meter in HA:
UPDATE: needed to select 5S now I can add it to HA but still no values:
|
|
@dodepier I was also able to configure it with 5S but that's for Zweden and doesn't seem to provide several entities with data. In the end I was able to make it work by selecting 'Enter manually' and filling out "dev/serial/by-id/usb-FTDI_FT232R_USB_UART_AB6UJX5A-if00-port0" (without the quotes. Might be that the port number at the end is different in your situation. |
|
@jeroenjjjdevries Thank you for the advise but also 'Enter manually' does not work for me. What kind of cable do you use? I did read a lot about cable issues (my cable was working fine with my previous meter, not a Landis/Gyr E360). It seems that the Landis/Gyr E360 has some extra requirements for the cable (with pull-up resistor): https://webshop.cedel.nl/Slimme-meter-kabel-P1-USB-voor-Landis-Gyr-E360 https://www.domoticz.com/forum/viewtopic.php?t=30587 UPDATE: I bought a p1 gateways now the meter works perfect with HA and the DSMR Slimme Meter integration |
|
@dodepier I'm using this cable: https://www.sossolutions.nl/slimme-meter-kabel-p1-kabel-5-meter Just one of the regular cables. If you go to 'Configuration', 'Add-ons, Backups & Supervisor', 'System' tab, then click the 3 dots in the bottom right corner of the 'Host' window, 'Hardware', at 'Search hardware' fill out "usb", you should find something called 'ttyUSB*'. |
|
@jeroenjjjdevries Thank you for the info I did check the hardware ID of the USB device but it did not work for me (It did show up under the hardware info but could not connect). I did order a cheap similar version of the cable couple years ago. Maybe something is wrong with it now. Nevertheless, HA and DSMR is now working with a wifi gateway (it think it is based on an ESP32) |
|
I do have the same issue as described here. The issue is: I bought a specific cable for the E360 which has the required pull-up, but it still fails. when using putty i get proper data, but somehow I think HA is not using the right settings for the serial port for this meter? I also read topics suggesting it’s working fine in Domoticz, but in HA it’s a real struggle. I am able to configure the meter with DSMR5 as option, but only after 10 or so tries. It then registers data about once every 20-45 minutes, so data is unusable. it would be great if we could get this working and have it update at least every 10 seconds (or even more frequent). one of the solutions I read is that Liander has marked the P1 port on these meters as defective, and the meter could be swapped for it. I tried this route as well: Liander does not have enough meters in stock, making a waiting time of 6-12 months. if anyone would be able to troubleshoot this, or even resolve this, it would be very welcome. If needed I am able to meet digitally some time to check on the issue together. |
|
There hasn't been any activity on this issue recently. Due to the high number of incoming GitHub notifications, we have to clean some of the old issues, as many of them have already been resolved with the latest updates. |
The problem
It seems the DSMR Slimme Meter integration is not working completely as expected with our Landis/Gyr E360 (ESMR 5.0)
According to the documentation I should install DSMR version 5 (as it's a dutch meter), but I can only get it installed with DSMR 5S, all other option mention 'Failed to communicate' when trying to submit the device selection
After installing the device as 5S, it shows several errors in the HA log.
What version of Home Assistant Core has the issue?
core-2022.3.5
What was the last working version of Home Assistant Core?
No response
What type of installation are you running?
Home Assistant OS
Integration causing the issue
dsmr
Link to integration documentation on our website
https://www.home-assistant.io/integrations/dsmr
Diagnostics information
No response
Example YAML snippet
No response
Anything in the logs that might be useful for us?
Logger: dsmr_parser.clients.protocol Source: /usr/local/lib/python3.9/site-packages/dsmr_parser/clients/protocol.py:155 First occurred: 15:07:54 (231 occurrences) Last logged: 16:08:11 failed to parse telegram Traceback (most recent call last): File "/usr/local/lib/python3.9/site-packages/dsmr_parser/clients/protocol.py", line 151, in handle_telegram parsed_telegram = self.telegram_parser.parse(telegram) File "/usr/local/lib/python3.9/site-packages/dsmr_parser/parsers.py", line 48, in parse self.validate_checksum(telegram_data) File "/usr/local/lib/python3.9/site-packages/dsmr_parser/parsers.py", line 82, in validate_checksum raise ParseError( dsmr_parser.exceptions.ParseError: Failed to perform CRC validation because the telegram is incomplete. The checksum and/or content values are missing. Logger: dsmr_parser.clients.protocol Source: /usr/local/lib/python3.9/site-packages/dsmr_parser/clients/protocol.py:153 First occurred: 15:04:53 (3104 occurrences) Last logged: 16:08:27 Invalid telegram. The CRC checksum '50365' does not match the expected '17913' Invalid telegram. The CRC checksum '52990' does not match the expected '10217' Invalid telegram. The CRC checksum '5866' does not match the expected '21703' Invalid telegram. The CRC checksum '20979' does not match the expected '5424' Invalid telegram. The CRC checksum '10506' does not match the expected '61748'Additional information
Reading through several forums, I can find many people with CRC issues when using the Landis Gyr E360
https://www.domoticz.com/forum/viewtopic.php?t=26962
psvanstrom/esphome-p1reader#4
https://community.home-assistant.io/t/dsmr-issue-with-landis-gyr-e360/279389
https://community.home-assistant.io/t/dsmr-sensors-re-add/254264
The text was updated successfully, but these errors were encountered: