From f0796b0496f8fded1d7fbfdf9daff923105f6034 Mon Sep 17 00:00:00 2001
From: Daniel Shokouhi <dshokouhi@gmail.com>
Date: Wed, 5 Oct 2022 12:04:16 -0700
Subject: [PATCH] Clean up spacing in BLE transmitter description

---
 common/src/main/res/values/strings.xml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/common/src/main/res/values/strings.xml b/common/src/main/res/values/strings.xml
index 77284d18d04..8fea90963f4 100644
--- a/common/src/main/res/values/strings.xml
+++ b/common/src/main/res/values/strings.xml
@@ -464,7 +464,7 @@
     <string name="sensor_description_battery_level">The current battery level of the device</string>
     <string name="sensor_description_battery_state">The current charging state of the battery</string>
     <string name="sensor_description_battery_temperature">The current battery temperature</string>
-    <string name="sensor_description_bluetooth_ble_emitter">Send BLE iBeacon with configured interval, used to track presence around house, e.g. together with roomassistant, esp32-mqtt-room or espresence projects.\n\nWarning: this can affect battery life, particularly if the \"Transmitter power\" setting is set to High or \"Advertise Mode\" is set to Low latency.\nSettings allow for specifying:\n- \"UUID\" (standard UUID format), \"Major\" and \"Minor\" (should be 0 - 65535), to tailor identifiers and groups\n- \"Transmitter Power\" and \"Advertise Mode\" to help to preserve battery life (use lowest values if possible)#n - \"Measured Power\" to specify power measured at 1m (initial default -59)\n\nNote:\nAdditionally a separate setting exists (\"Enable Transmitter\") to stop or start transmitting.</string>
+    <string name="sensor_description_bluetooth_ble_emitter">Send BLE iBeacon with configured interval, used to track presence around house, e.g. together with roomassistant, esp32-mqtt-room or espresence projects.\n\nWarning: this can affect battery life, particularly if the \"Transmitter power\" setting is set to High or \"Advertise Mode\" is set to Low latency.\n\nSettings allow for specifying:\n- \"UUID\" (standard UUID format), \"Major\" and \"Minor\" (should be 0 - 65535), to tailor identifiers and groups\n- \"Transmitter Power\" and \"Advertise Mode\" to help to preserve battery life (use lowest values if possible)\n - \"Measured Power\" to specify power measured at 1m (initial default -59)\n\nNote:\nAdditionally a separate setting exists (\"Enable Transmitter\") to stop or start transmitting.</string>
     <string name="sensor_description_bluetooth_ble_beacon_monitor">Scans for iBeacons and shows the IDs of nearby beacons and their distance in meters.\n\nWarning: this can affect battery life, especially with a short \"Scan Interval\".\n\nSettings allow for specifying:\n- \"Filter Iterations\" (should be 1 - 100, default: 10), higher values will result in more stable measurements but also less responsiveness.\n- \"Filter RSSI Multiplier\" (should be 1.0 - 2.0, default: 1.05), can be used to archive more stable measurements when beacons are farther away. This will also affect responsiveness.\n - \"Scan Interval\" (default: 500) milliseconds between scans. Shorter intervals will drain the battery more quickly.\n - \"Scan Period\" (default: 1100) milliseconds to scan for beacons. Most beacons will send a signal every second so this value should be at least 1100ms.\n\nNote:\nAdditionally a separate setting exists (\"Enable Beacon Monitor\") to stop or start scanning.</string>
     <string name="sensor_description_bluetooth_connection">Information about currently connected Bluetooth devices</string>
     <string name="sensor_description_bluetooth_state">Whether Bluetooth is enabled on the device</string>