INSTALL.DJGPP

 
 INSTALLATION ON THE DOS PLATFORM WITH DJGPP
 -------------------------------------------

 OpenSSL has been ported to DJGPP, a Unix look-alike 32-bit run-time
 environment for 16-bit DOS, but only with long filename support.
 If you wish to compile on native DOS with 8+3 filenames, you will
 have to tweak the installation yourself, including renaming files
 with illegal or duplicate names.

 You should have a full DJGPP environment installed, including the
 latest versions of DJGPP, GCC, BINUTILS, BASH, etc. This package
 requires that PERL and BC also be installed.

 All of these can be obtained from the usual DJGPP mirror sites or
 directly at "http://www.delorie.com/pub/djgpp". For help on which
 files to download, see the DJGPP "ZIP PICKER" page at
 "http://www.delorie.com/djgpp/zip-picker.html". You also need to have
 the WATT-32 networking package installed before you try to compile
 OpenSSL. This can be obtained from "http://www.bgnett.no/~giva/".
 The Makefile assumes that the WATT-32 code is in the directory
 specified by the environment variable WATT_ROOT. If you have watt-32
 in directory "watt32" under your main DJGPP directory, specify
 WATT_ROOT="/dev/env/DJDIR/watt32".

 To compile OpenSSL, start your BASH shell, then configure for DJGPP by
 running "./Configure" with appropriate arguments:

	./Configure no-threads --prefix=/dev/env/DJDIR DJGPP
 
 And finally fire up "make". You may run out of DPMI selectors when
 running in a DOS box under Windows. If so, just close the BASH
 shell, go back to Windows, and restart BASH. Then run "make" again.

 CAVEAT LECTOR
 -------------

 ### Default install and config paths

 ./Configure defaults to '/usr/local/ssl' as installation top.  This is
 suitable for Unix, but not for Windows, where this usually is a world
 writable directory and therefore accessible for change by untrusted users.
 It is therefore recommended to set your own --prefix or --openssldir to
 some location that is not world writeable (see the example above)

 ### Entropy

 Quoting FAQ:

  "Cryptographic software needs a source of unpredictable data to work
   correctly.  Many open source operating systems provide a "randomness
   device" (/dev/urandom or /dev/random) that serves this purpose."

 As of version 0.9.7f DJGPP port checks upon /dev/urandom$ for a 3rd
 party "randomness" DOS driver. One such driver, NOISE.SYS, can be
 obtained from "http://www.rahul.net/dkaufman/index.html".