diff --git a/Dockerfile b/Dockerfile
index d6e33abeff..5bd42c9694 100644
--- a/Dockerfile
+++ b/Dockerfile
@@ -1,8 +1,8 @@
 # Transmission and OpenVPN
 #
-# Version 0.9
+# Version 1.0
 
-FROM phusion/baseimage:0.9.15
+FROM ubuntu:14.04
 MAINTAINER Kristian Haugene
 
 VOLUME /data
@@ -21,19 +21,6 @@ RUN apt-get install -y transmission-common
 RUN apt-get install -y transmission-daemon
 RUN apt-get install -y openvpn
 RUN apt-get install -y curl
-RUN apt-get install -y screen
-
-# Transmission service
-RUN mkdir -p /etc/service/transmission/
-ADD transmission/run.sh /etc/service/transmission/run
-
-# Transmission port updater
-RUN mkdir -p /etc/service/portupdater/
-ADD transmission/runUpdates.sh /etc/service/portupdater/run
-
-# OpenVPN service
-RUN mkdir -p /etc/service/openvpn/
-ADD runOpenVpn.sh /etc/service/openvpn/run
 
 VOLUME /config
 
@@ -41,14 +28,17 @@ VOLUME /config
 ADD piaconfig/config.ovpn /etc/openvpn/config.ovpn
 ADD piaconfig/ca.crt /etc/openvpn/ca.crt
 ADD piaconfig/crl.pem /etc/openvpn/crl.pem
-ADD runOpenVpn.sh /etc/openvpn/start.sh
 ADD transmission/defaultSettings.json /etc/transmission-daemon/settings.json
 ADD transmission/updateTransmissionPort.sh /etc/transmission-daemon/updatePort.sh
 ADD transmission/periodicUpdates.sh /etc/transmission-daemon/periodicUpdates.sh
+ADD transmission/run.sh /etc/transmission-daemon/start.sh
+ADD transmission/runUpdates.sh /etc/transmission-daemon/startPortUpdates.sh
+ADD transmission/down.sh /etc/transmission-daemon/stop.sh
+ADD runOpenVpn.sh /etc/openvpn/start.sh
 
 # Expose port and run. Use baseimage-docker's init system
 EXPOSE 9091
-CMD ["/sbin/my_init"]
+CMD ["/etc/openvpn/start.sh"]
 
 # Clean up APT when done.
 RUN apt-get clean && rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/*
diff --git a/README.md b/README.md
index 8a3c98b70a..805b39f0e0 100644
--- a/README.md
+++ b/README.md
@@ -6,7 +6,7 @@ This Docker container lets you run Transmission with WebUI while connecting to P
 The container is available from the Docker registry and this is the simplest way to get it. To run the container use this command:
 
 ```
-docker run --privileged  -d -v /your/storage/path/:/data -v /your/config/path/:/config -p 9091:9091 haugene/transmission-openvpn
+$ docker run --privileged  -d -v /your/storage/path/:/data -v /your/config/path/:/config -p 9091:9091 haugene/transmission-openvpn
 ```
 
 As you can see, the container expects two volumes to be mounted. One is used for storing your downloads from Transmission, and the other provides configurations. The container comes with a default Transmission settings.json file that expects the folders "completed, incomplete and watch" to be present in /your/storage/path (aka /data). This is where Transmission will store your downloads, incomplete downloads and a watch directory to look for new .torrent files.
@@ -20,12 +20,12 @@ To build this container, clone the repository and cd into it.
 
 ### Build it:
 ```
-cd /repo/location/docker-transmission-openvpn
-docker build -t="docker-transmission-openvpn" .
+$ cd /repo/location/docker-transmission-openvpn
+$ docker build -t="docker-transmission-openvpn" .
 ```
 ### Run it:
 ```
-docker run --privileged  -d -v /your/storage/path/:/data -v /your/config/path/:/config -p 9091:9091 docker-transmission-openvpn
+$ docker run --privileged  -d -v /your/storage/path/:/data -v /your/config/path/:/config -p 9091:9091 docker-transmission-openvpn
 ```
 
 As described in the "Run container from Docker registry" section, this will start a container with default settings. This means that you should have the folders "completed, incomplete and watch" in /your/storage/path, and pia-credentials.txt in /your/config/path.
@@ -47,7 +47,7 @@ This is because the VPN is active, and since docker is running in a different ip
 There are several ways to fix this. You can pipe and do fancy iptables or ip route configurations on the host and in the Docker image. But I found that the simplest solution is just to proxy my traffic. Start a Nginx container like this:
 
 ```
-docker run -d -v /path/to/nginx.conf:/etc/nginx.conf:ro -p 8080:80 nginx
+$ docker run -d -v /path/to/nginx.conf:/etc/nginx.conf:ro -p 8080:80 nginx
 ```
 Where /path/to/nginx.conf has this content:
 
@@ -69,21 +69,18 @@ Your Transmission WebUI should now be avaliable at "your.host.ip.addr:8080/trans
 Change the port in the docker run command if 8080 is not suitable for you.
 
 ### What if I want to run the container interactively.
-If you want do have access inside the container while running, do like this.
+If you want do have access inside the container while running you have two choices. To have a look inside an already running container, use docker exec to get a terminal inside the container.
 
 ```
-docker run --privileged -v /mnt/disk1/Torrents/:/data -v /your/config/path/:/config -p 9091:9091 -it --entrypoint=/bin/bash docker-transmission-openvpn
+$ docker ps | grep transmission-openvpn | awk '{print $1}' // Prints container id
+$ af4dd385916d
+$ docker exec -it af4dd bash
 ```
 
-This will start the container and give you a bash shell to work from. The container has screen installed, so you can use screen to start the init system which starts openVPN and Transmission. Then you can detach from screen and continue to use bash inside the running container. If you're unfamiliar with screen, read up on it. The commands are as follows:
+If you want to start the container without it starting OpenVPN on boot, then run the image without daemonizing and use bash as entrypoint.
 
-``` 
-screen
 ```
-Accept the terms, then run my_init and detach.
-
-```
-/sbin/my_init
-CTRL+A + d
+$ docker run --privileged -it transmission-openvpn bash
 ```
-You should now be detached and both services should be running.
+
+From there you can start the service yourself, or do whatever (probably developer-related) you came to do.
diff --git a/piaconfig/config.ovpn b/piaconfig/config.ovpn
index 052927707c..c3f8b067d2 100644
--- a/piaconfig/config.ovpn
+++ b/piaconfig/config.ovpn
@@ -15,4 +15,7 @@ verb 1
 reneg-sec 0
 crl-verify /etc/openvpn/crl.pem
 
-
+# OpenVPN control startup and shut down of transmission
+script-security 2
+up /etc/transmission-daemon/start.sh
+down /etc/transmission-daemon/stop.sh
diff --git a/transmission/down.sh b/transmission/down.sh
new file mode 100755
index 0000000000..0f9c4f40be
--- /dev/null
+++ b/transmission/down.sh
@@ -0,0 +1,3 @@
+#! /bin/bash
+
+kill $(ps aux | grep transmission-daemon | grep -v grep | awk '{print $2}')
diff --git a/transmission/run.sh b/transmission/run.sh
index 0853b83a09..09bf33f57d 100755
--- a/transmission/run.sh
+++ b/transmission/run.sh
@@ -3,8 +3,12 @@
 if [ -f /config/transmission/settings.json ];
 then
    echo "STARTING TRANSMISSION: Using custom config directory /config/transmission"
-   exec /usr/bin/transmission-daemon -f -g /config/transmission/
+   exec /usr/bin/transmission-daemon -g /config/transmission/ &
 else
    echo "STARTING TRANSMISSION: No configuration provided, using defaults"
-   exec /usr/bin/transmission-daemon -f -g /etc/transmission-daemon/
+   exec /usr/bin/transmission-daemon -g /etc/transmission-daemon/ &
 fi
+
+exec /etc/transmission-daemon/startPortUpdates.sh &
+
+echo "STARTED PORT UPDATER"