From 7b078367e82fae8ef4ec094f6db9e584db82f06a Mon Sep 17 00:00:00 2001
From: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Date: Thu, 20 Jan 2022 09:58:40 +0100
Subject: [PATCH] dcd_da1469x: Re-enable RX after resume

Going to suspend states disable reception on non-0 RX endpoints.

Now when USB resume condition is detected, all RX endpoints
with pending transfers are resumed.
---
 src/portable/dialog/da146xx/dcd_da146xx.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/src/portable/dialog/da146xx/dcd_da146xx.c b/src/portable/dialog/da146xx/dcd_da146xx.c
index 5713f5cca8..02fad81651 100644
--- a/src/portable/dialog/da146xx/dcd_da146xx.c
+++ b/src/portable/dialog/da146xx/dcd_da146xx.c
@@ -733,6 +733,15 @@ static void handle_alt_ev(void)
       set_nfsr(NFSR_NODE_OPERATIONAL);
       USB->USB_ALTMSK_REG = USB_USB_ALTMSK_REG_USB_M_RESET_Msk |
                             USB_USB_ALTMSK_REG_USB_M_SD3_Msk;
+      // Re-enable reception of endpoint with pending transfer
+      for (int epnum = 1; epnum <= 3; ++epnum)
+      {
+        xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, TUSB_DIR_OUT);
+        if (xfer->total_len > xfer->transferred)
+        {
+          start_rx_packet(xfer);
+        }
+      }
       dcd_event_bus_signal(0, DCD_EVENT_RESUME, true);
     }
   }