The server object is the main application container. The server manages all incoming requests
along with all the facilities provided by the framework. Each server supports a single connection
(e.g. listen to port 80).
Creates a new server object where:
options- (optional) a server configuration object.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ load: { sampleInterval: 1000 } });The server options control the behavior of the server object. Note that the options object is
deeply cloned (with the exception of listener which is shallowly
copied) and should not contain any values that are unsafe to perform deep copy on.
All options are optionals.
Default value: '::' if IPv6 is available, otherwise '0.0.0.0' (i.e. all available network interfaces).
Sets the hostname or IP address the server will listen on. If not configured, defaults to
host if present, otherwise to all available network interfaces. Set to
'127.0.0.1', '::1', or 'localhost' to restrict the server to only those coming from the same host.
Default value: {}.
Provides application-specific configuration which can later be accessed via
server.settings.app. The framework does not interact with this object. It is
simply a reference made available anywhere a server reference is provided.
Note the difference between server.settings.app which is used to store static configuration
values and server.app which is meant for storing run-time state.
Default value: true.
Used to disable the automatic initialization of the listener. When
false, indicates that the listener will be started manually outside
the framework.
Cannot be set to false along with a port value.
Default value: { provider: { constructor: require('@hapi/catbox-memory'), options: { partition: 'hapi-cache' } } }.
Sets up server-side caching providers. Every server includes a default cache for storing application state. By default, a simple memory-based cache is created which has limited capacity and capabilities.
hapi uses catbox for its cache implementation which includes support for common storage solutions (e.g. Redis, MongoDB, Memcached, Riak, among others). Caching is only utilized if methods and plugins explicitly store their state in the cache.
The server cache configuration only defines the storage container itself. The configuration can be assigned one or more (array):
-
a class or prototype function (usually obtained by calling
require()on a catbox strategy such asrequire('@hapi/catbox-redis')). A new catbox client will be created internally using this constructor. -
a configuration object with the following:
-
engine- a catbox engine object instance. -
name- an identifier used later when provisioning or configuring caching for server methods or plugins. Each cache name must be unique. A single item may omit thenameoption which defines the default cache. If every cache includes aname, a default memory cache is provisioned as well. -
provider- a class, a constructor function, or an object with the following:-
constructor- a class or a prototype function. -
options- (optional) a settings object passed as-is to theconstructorwith the following:partition- (optional) string used to isolate cached data. Defaults to'hapi-cache'.- other constructor-specific options passed to the
constructoron instantiation.
-
-
shared- iftrue, allows multiple cache users to share the same segment (e.g. multiple methods using the same cache storage container). Default tofalse. -
One (and only one) of
engineorprovideris required per configuration object.
-
Default value: { minBytes: 1024 }.
Defines server handling of content encoding requests. If false, response content encoding is
disabled and no compression is performed by the server.
Default value: '1024'.
Sets the minimum response payload size in bytes that is required for content encoding compression. If the payload size is under the limit, no compression is performed.
Default value: { request: ['implementation'] }.
Determines which logged events are sent to the console. This should only be used for development
and does not affect which events are actually logged internally and recorded. Set to false to
disable all console logging, or to an object with:
-
log- a string array of server log tags to be displayed viaconsole.error()when the events are logged viaserver.log()as well as internally generated server logs. Defaults to no output. -
request- a string array of request log tags to be displayed viaconsole.error()when the events are logged viarequest.log()as well as internally generated request logs. For example, to display all errors, set the option to['error']. To turn off all console debug messages set it tofalse. To display all request logs, set it to'*'. Defaults to uncaught errors thrown in external code (these errors are handled automatically and result in an Internal Server Error response) or runtime errors due to developer error.
For example, to display all errors, set the log or request to ['error']. To turn off all
output set the log or request to false. To display all server logs, set the log or
request to '*'. To disable all debug information, set debug to false.
Default value: the operating system hostname and if not available, to 'localhost'.
The public hostname or IP address. Used to set server.info.host and
server.info.uri and as address if none is provided.
Default value: false.
If true, the request.info.remoteAddress and request.info.remotePort are populated when the request is received which can consume more resource (but is ok if the information is needed, especially for aborted requests). When false, the fields are only populated upon demand (but will be undefined if accessed after the request is aborted).
Default value: none.
An optional node HTTP (or HTTPS) http.Server
object (or an object with a compatible interface).
If the listener needs to be manually started, set autoListen to
false.
If the listener uses TLS, set tls to true.
Default value: { sampleInterval: 0, maxHeapUsedBytes: 0, maxRssBytes: 0, maxEventLoopDelay: 0, maxEventLoopUtilization: 0 }.
Server excessive load handling limits where:
-
sampleInterval- the frequency of sampling in milliseconds. When set to0, the other load options are ignored. Defaults to0(no sampling). -
maxHeapUsedBytes- maximum V8 heap size over which incoming requests are rejected with an HTTP Server Timeout (503) response. Defaults to0(no limit). -
maxRssBytes- maximum process RSS size over which incoming requests are rejected with an HTTP Server Timeout (503) response. Defaults to0(no limit). -
maxEventLoopDelay- maximum event loop delay duration in milliseconds over which incoming requests are rejected with an HTTP Server Timeout (503) response. Defaults to0(no limit). -
maxEventLoopUtilization- maximum event loop utilization value over which incoming requests are rejected with an HTTP Server Timeout (503) response. Defaults to0(no limit).
Default value: none.
Options passed to the mimos module when generating the mime database used by the server (and accessed via server.mime):
-
override- an object hash that is merged into the built in mime information specified here. Each key value pair represents a single mime object. Each override value must contain:-
key- the lower-cased mime-type string (e.g.'application/javascript'). -
value- an object following the specifications outlined here. Additional values include:-
type- specify thetypevalue of result objects, defaults tokey. -
predicate- method with signaturefunction(mime)when this mime type is found in the database, this function will execute to allows customizations.
-
-
const options = {
mime: {
override: {
'node/module': {
source: 'iana',
compressible: true,
extensions: ['node', 'module', 'npm'],
type: 'node/module'
},
'application/javascript': {
source: 'iana',
charset: 'UTF-8',
compressible: true,
extensions: ['js', 'javascript'],
type: 'text/javascript'
},
'text/html': {
predicate: function(mime) {
if (someCondition) {
mime.foo = 'test';
}
else {
mime.foo = 'bar';
}
return mime;
}
}
}
}
};Default value: { cleanStop: true }.
Defines server handling of server operations:
cleanStop- iftrue, the server keeps track of open connections and properly closes them when the server is stopped. Under normal load, this should not interfere with server performance. However, under severe load connection monitoring can consume additional resources and aggravate the situation. If the server is never stopped, or if it is forced to stop without waiting for open connection to close, setting this tofalsecan save resources that are not being utilized anyway. Defaults totrue.
Default value: {}.
Plugin-specific configuration which can later be accessed via server.settings.plugins.
plugins is an object where each key is a plugin name and the value is the configuration.
Note the difference between server.settings.plugins which is used to store
static configuration values and server.plugins which is meant for storing
run-time state.
Default value: 0 (an ephemeral port).
The TCP port the server will listen to. Defaults the next available port when the server is started
(and assigned to server.info.port).
If port is a string containing a '/' character, it is used as a UNIX domain socket path.
If it starts with '\.\pipe', it is used as a Windows named pipe.
Default value: {}.
Defines server handling of the request path query component.
Default value: none.
Sets a query parameters parser method using the signature function(query) where:
query- an object containing the incomingrequest.queryparameters.- the method must return an object where each key is a parameter and matching value is the
parameter value. If the method throws, the error is used as the response or returned when
request.setUrl()is called.
const Qs = require('qs');
const options = {
query: {
parser: (query) => Qs.parse(query)
}
};Default value: { isCaseSensitive: true, stripTrailingSlash: false }.
Controls how incoming request URIs are matched against the routing table:
-
isCaseSensitive- determines whether the paths '/example' and '/EXAMPLE' are considered different resources. Defaults totrue. -
stripTrailingSlash- removes trailing slashes on incoming paths. Defaults tofalse.
Default value: none.
A route options object used as the default configuration for every route.
Default value:
{
strictHeader: true,
ignoreErrors: false,
isSecure: true,
isHttpOnly: true,
isSameSite: 'Strict',
encoding: 'none'
}Sets the default configuration for every state (cookie) set explicitly via
server.state() or implicitly (without definition) using the
state configuration object.
Default value: none.
Used to create an HTTPS connection. The tls object is passed unchanged to the node
HTTPS server as described in the node HTTPS documentation.
Set to true when passing a listener object that has been configured
to use TLS directly.
Default value: constructed from runtime server information.
The full public URI without the path (e.g. 'http://example.com:8080'). If present, used as the
server server.info.uri, otherwise constructed from the server settings.
Access: read / write.
Provides a safe place to store server-specific run-time application data without potential conflicts with the framework internals. The data can be accessed whenever the server is accessible. Initialized with an empty object.
const server = Hapi.server();
server.app.key = 'value';
const handler = function (request, h) {
return request.server.app.key; // 'value'
};Access: authentication strategy specific.
An object where each key is an authentication strategy name and the value is the exposed strategy
API. Available only when the authentication scheme exposes an API by returning an api key in the
object returned from its implementation function.
const server = Hapi.server({ port: 80 });
const scheme = function (server, options) {
return {
api: {
settings: {
x: 5
}
},
authenticate: function (request, h) {
const authorization = request.headers.authorization;
if (!authorization) {
throw Boom.unauthorized(null, 'Custom');
}
return h.authenticated({ credentials: { user: 'john' } });
}
};
};
server.auth.scheme('custom', scheme);
server.auth.strategy('default', 'custom');
console.log(server.auth.api.default.settings.x); // 5Access: read only.
Contains the default authentication configuration if a default strategy was set via
server.auth.default().
Access: read only.
Provides access to the decorations already applied to various framework interfaces. The object must
not be modified directly, but only through server.decorate.
Contains:
request- decorations on the request object.response- decorations on the response object.toolkit- decorations on the response toolkit.server- decorations on the server object.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const success = function () {
return this.response({ status: 'ok' });
};
server.decorate('toolkit', 'success', success);
console.log(server.decorations.toolkit); // ['success']Access: podium public interface.
The server events emitter. Utilizes the podium with support for event criteria validation, channels, and filters.
Use the following methods to interact with server.events:
server.event(events)- register application events.server.events.emit(criteria, data)- emit server events.server.events.on(criteria, listener, context)- subscribe to all events.server.events.once(criteria, listener, context)- subscribe to a single event.
Other methods include: server.events.removeListener(name, listener),
server.events.removeAllListeners(name), and server.events.hasListeners(name).
The 'log' event type emits internal server events generated by the framework as well as
application events logged with server.log().
The 'log' event handler uses the function signature function(event, tags) where:
-
event- an object with the following properties:timestamp- the event timestamp.tags- an array of tags identifying the event (e.g.['error', 'http']).channel- set to'internal'for internally generated events, otherwise'app'for events generated byserver.log().data- event-specific information. Available when event data was provided and is not an error. Errors are passed viaerror.error- the error object related to the event if applicable. Cannot appear together withdata.
-
tags- an object where eachevent.tagis a key and the value istrue. Useful for quick identification of events.
server.events.on('log', (event, tags) => {
if (tags.error) {
console.log(`Server error: ${event.error ? event.error.message : 'unknown'}`);
}
});The internally generated events are (identified by their tags):
-
load- logs the current server load measurements when the server rejects a request due to high load. The event data contains the process load metrics. -
connectionclienterror- aclientErrorevent was received from the HTTP or HTTPS listener. The event data is the error object received.
The 'cachePolicy' event type is emitted when a server cache policy
is created via server.cache() or a server.method() with caching enabled is registered.
The 'cachePolicy' event handler uses the function signature function(cachePolicy, cache, segment) where:
cachePolicy- the catbox cache policy.cache- the cache provision name used when the policy was created orundefinedif the default cache was used.segment- the segment name used when the policy was created.
server.events.on('cachePolicy', (cachePolicy, cache, segment) => {
console.log(`New cache policy created using cache: ${cache === undefined ? 'default' : cache} and segment: ${segment}`);
});The 'request' event type emits internal request events generated by the framework as well as
application events logged with request.log().
The 'request' event handler uses the function signature function(request, event, tags) where:
-
request- the request object. -
event- an object with the following properties:timestamp- the event timestamp.tags- an array of tags identifying the event (e.g.['error', 'http']).channel- one of'app'- events generated byrequest.log().'error'- emitted once per request if the response had a500status code.'internal'- internally generated events.
request- the request identifier.data- event-specific information. Available when event data was provided and is not an error. Errors are passed viaerror.error- the error object related to the event if applicable. Cannot appear together withdata.
-
tags- an object where eachevent.tagis a key and the value istrue. Useful for quick identification of events.
server.events.on('request', (request, event, tags) => {
if (tags.error) {
console.log(`Request ${event.request} error: ${event.error ? event.error.message : 'unknown'}`);
}
});To listen to only one of the channels, use the event criteria object:
server.events.on({ name: 'request', channels: 'error' }, (request, event, tags) => {
console.log(`Request ${event.request} failed`);
});The internally generated events are (identified by their tags):
accept-encodingerror- a request received contains an invalid Accept-Encoding header.authunauthenticated- no authentication scheme included with the request.authunauthenticatedresponse{strategy}- the authentication strategy listed returned a non-error response (e.g. a redirect to a login page).authunauthenticatederror{strategy}- the request failed to pass the listed authentication strategy (invalid credentials).authunauthenticatedmissing{strategy}- the request failed to pass the listed authentication strategy (no credentials found).authunauthenticatedtry{strategy}- the request failed to pass the listed authentication strategy in'try'mode and will continue.authscopeerror- the request authenticated but failed to meet the scope requirements.authentityusererror- the request authenticated but included an application entity when a user entity was required.authentityapperror- the request authenticated but included a user entity when an application entity was required.exterror- anonPostResponseextension handler errored.handlererror- the route handler returned an error. Includes the execution duration and the error message.preerror- a pre method was executed and returned an error. Includes the execution duration, assignment key, and error.internalerror- an HTTP 500 error response was assigned to the request.internalimplementationerror- an incorrectly implemented lifecycle method.requestaborterror- the request aborted.requestclosederror- the request closed prematurely.requesterror- the request stream emitted an error. Includes the error.requestservertimeouterror- the request took too long to process by the server. Includes the timeout configuration value and the duration.stateerror- the request included an invalid cookie or cookies. Includes the cookies and error details.stateresponseerror- the response included an invalid cookie which prevented generating a valid header. Includes the error.payloaderror- failed processing the request payload. Includes the error.responseerror- failed writing the response to the client. Includes the error.responseerrorclose- failed writing the response to the client due to prematurely closed connection.responseerroraborted- failed writing the response to the client due to prematurely aborted connection.responseerrorcleanup- failed freeing response resources.validationerror{input}- input (i.e. payload, query, params, headers) validation failed. Includes the error. Only emitted whenfailActionis set to'log'.validationresponseerror- response validation failed. Includes the error message. Only emitted whenfailActionis set to'log'.
The 'response' event type is emitted after the response is sent back to the client (or when the
client connection closed and no response sent, in which case request.response
is null). A single event is emitted per request. The 'response' event handler uses the function
signature function(request) where:
request- the request object.
server.events.on('response', (request) => {
console.log(`Response sent for request: ${request.info.id}`);
});The 'route' event type is emitted when a route is added via server.route().
The 'route' event handler uses the function signature function(route) where:
route- the route information. Therouteobject must not be modified.
server.events.on('route', (route) => {
console.log(`New route added: ${route.path}`);
});The 'start' event type is emitted when the server is started using server.start().
The 'start' event handler uses the function signature function().
server.events.on('start', () => {
console.log('Server started');
});The 'closing' event type is emitted when the server is stopped using server.stop(). It is triggered when incoming requests are no longer accepted but before all underlying active connections have been closed, and thus before the 'stop' event is triggered.
The 'closing' event handler uses the function signature function().
server.events.on('closing', () => {
console.log('Server is closing');
});The 'stop' event type is emitted when the server is stopped using server.stop().
The 'stop' event handler uses the function signature function().
server.events.on('stop', () => {
console.log('Server stopped');
});Access: read only.
An object containing information about the server where:
-
id- a unique server identifier (using the format '{hostname}:{pid}:{now base36}'). -
created- server creation timestamp. -
started- server start timestamp (0when stopped). -
port- the connection port based on the following rules:- before the server has been started: the configured
portvalue. - after the server has been started: the actual port assigned when no port is configured or was
set to
0.
- before the server has been started: the configured
-
host- Thehostconfiguration value. -
address- the active IP address the connection was bound to after starting. Set toundefineduntil the server has been started or when using a non TCP port (e.g. UNIX domain socket). -
protocol- the protocol used:'http'- HTTP.'https'- HTTPS.'socket'- UNIX domain socket or Windows named pipe.
-
uri- a string representing the connection (e.g. 'http://example.com:8080' or 'socket:/unix/domain/socket/path'). Contains theurivalue if set, otherwise constructed from the available settings. If noportis configured or is set to0, theuriwill not include a port component until the server is started.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
console.log(server.info.port); // 80Access: read only and listener public interface.
The node HTTP server object.
const Hapi = require('@hapi/hapi');
const SocketIO = require('socket.io');
const server = Hapi.server({ port: 80 });
const io = SocketIO.listen(server.listener);
io.sockets.on('connection', (socket) => {
socket.emit({ msg: 'welcome' });
});Access: read only.
An object containing the process load metrics (when load.sampleInterval
is enabled):
eventLoopDelay- event loop delay milliseconds.eventLoopUtilization- current event loop utilization value.heapUsed- V8 heap usage.rss- RSS memory usage.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ load: { sampleInterval: 1000 } });
console.log(server.load.rss);Access: read only.
Server methods are functions registered with the server and used throughout the application as a common utility. Their advantage is in the ability to configure them to use the built-in cache and share across multiple request handlers without having to create a common module.
sever.methods is an object which provides access to the methods registered via
server.method() where each server method name is an object
property.
const Hapi = require('@hapi/hapi');
const server = Hapi.server();
server.method('add', (a, b) => (a + b));
const result = server.methods.add(1, 2); // 3Access: read only and mimos public interface.
Provides access to the server MIME database used for setting content-type information. The object
must not be modified directly but only through the mime server setting.
const Hapi = require('@hapi/hapi');
const options = {
mime: {
override: {
'node/module': {
source: 'steve',
compressible: false,
extensions: ['node', 'module', 'npm'],
type: 'node/module'
}
}
}
};
const server = Hapi.server(options);
console.log(server.mime.path('code.js').type) // 'application/javascript'
console.log(server.mime.path('file.npm').type) // 'node/module'Access: read / write.
An object containing the values exposed by each registered plugin where each key is a plugin name
and the values are the exposed properties by each plugin using
server.expose(). Plugins may set the value of the
server.plugins[name] object directly or via the server.expose() method.
exports.plugin = {
name: 'example',
register: function (server, options) {
server.expose('key', 'value');
server.plugins.example.other = 'other';
console.log(server.plugins.example.key); // 'value'
console.log(server.plugins.example.other); // 'other'
}
};Access: read only.
The realm object contains sandboxed server settings specific to each plugin or authentication
strategy. When registering a plugin or an authentication scheme, a server object reference is
provided with a new server.realm container specific to that registration. It allows each plugin
to maintain its own settings without leaking and affecting other plugins.
For example, a plugin can set a default file path for local resources without breaking other
plugins' configured paths. When calling server.bind(), the active realm's
settings.bind property is set which is then used by routes and extensions added at the same level
(server root or plugin).
The server.realm object contains:
-
modifiers- when the server object is provided as an argument to the pluginregister()method,modifiersprovides the registration preferences passed theserver.register()method and includes:-
route- routes preferences:prefix- the route path prefix used by any calls toserver.route()from the server. Note that if a prefix is used and the route path is set to'/', the resulting path will not include the trailing slash.vhost- the route virtual host settings used by any calls toserver.route()from the server.
-
-
parent- the realm of the parent server object, ornullfor the root server. -
plugin- the active plugin name (empty string if at the server root). -
pluginOptions- the plugin options passed at registration. -
plugins- plugin-specific state to be shared only among activities sharing the same active state.pluginsis an object where each key is a plugin name and the value is the plugin state. -
settings- settings overrides:files.relativeTobind
The server.realm object should be considered read-only and must not be changed directly except
for the plugins property which can be directly manipulated by each plugin, setting its properties
inside plugins[name].
exports.register = function (server, options) {
console.log(server.realm.modifiers.route.prefix);
};Access: read only.
An object of the currently registered plugins where each key is a registered plugin name and the value is an object containing:
version- the plugin version.name- the plugin name.options- (optional) options passed to the plugin during registration.
Access: read only.
The server configuration object after defaults applied.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({
app: {
key: 'value'
}
});
console.log(server.settings.app); // { key: 'value' }Access: read only and statehood public interface.
The server cookies manager.
Access: read only.
The server cookies manager settings. The settings are based on the values configured in
server.options.state.
Access: read only.
An object containing the configuration of each cookie added via server.state()
where each key is the cookie name and value is the configuration object.
Access: read only.
An array containing the names of all configured cookies.
Access: read only.
A string indicating the listener type where:
'socket'- UNIX domain socket or Windows named pipe.'tcp'- an HTTP listener.
Access: read only.
The hapi module version number.
const Hapi = require('@hapi/hapi');
const server = Hapi.server();
console.log(server.version); // '17.0.0'Sets a default strategy which is applied to every route where:
-
options- one of:- a string with the default strategy name
- an authentication configuration object using the same format as the
route
authhandler options.
Return value: none.
The default does not apply when a route config specifies auth as false, or has an
authentication strategy configured (contains the strategy or
strategies authentication settings). Otherwise, the route
authentication config is applied to the defaults.
Note that if the route has authentication configured, the default only applies at the time of
adding the route, not at runtime. This means that calling server.auth.default() after adding a
route with some authentication config will have no impact on the routes added prior. However, the
default will apply to routes added before server.auth.default() is called if those routes lack
any authentication config.
The default auth strategy configuration can be accessed via server.auth.settings.default.
To obtain the active authentication configuration of a route, use server.auth.lookup(request.route).
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.auth.scheme('custom', scheme);
server.auth.strategy('default', 'custom');
server.auth.default('default');
server.route({
method: 'GET',
path: '/',
handler: function (request, h) {
return request.auth.credentials.user;
}
});Registers an authentication scheme where:
name- the scheme name.scheme- the method implementing the scheme with signaturefunction(server, options)where:server- a reference to the server object the scheme is added to. Each auth strategy is given its ownserver.realmwhose parent is the realm of theserverin the call toserver.auth.strategy().options- (optional) the schemeoptionsargument passed toserver.auth.strategy()when instantiation a strategy.
Return value: none.
The scheme function must return an authentication scheme object when
invoked.
An authentication scheme is an object with the following properties:
-
api- (optional) object which is exposed via theserver.auth.apiobject. -
async authenticate(request, h)- (required) a lifecycle method function called for each incoming request configured with the authentication scheme. The method is provided with two special toolkit methods for returning an authenticated or an unauthenticate result:h.authenticated()- indicate request authenticated successfully.h.unauthenticated()- indicate request failed to authenticate.
-
async payload(request, h)- (optional) a lifecycle method to authenticate the request payload. -
async response(request, h)- (optional) a lifecycle method to decorate the response with authentication headers before the response headers or payload is written. -
async verify(auth)- (optional) a method used to verify the authentication credentials provided are still valid (e.g. not expired or revoked after the initial authentication) where:auth- therequest.authobject containing thecredentialsandartifactsobjects returned by the scheme'sauthenticate()method.- the method throws an
Errorwhen the credentials passed are no longer valid (e.g. expired or revoked). Note that the method does not have access to the original request, only to the credentials and artifacts produced by theauthenticate()method.
-
options- (optional) an object with the following keys:payload- iftrue, requires payload validation as part of the scheme and forbids routes from disabling payload auth validation. Defaults tofalse.
When the scheme authenticate() method implementation throws an error or calls
h.unauthenticated(), the specifics of the error affect whether additional
authentication strategies will be attempted (if configured for the route). If the error includes a
message, no additional strategies will be attempted. If the err does not include a message but
does include the scheme name (e.g. Boom.unauthorized(null, 'Custom')), additional strategies will
be attempted in the order of preference (defined in the route configuration). If authentication
fails, the scheme names will be present in the 'WWW-Authenticate' header.
When the scheme payload() method throws an error with a message, it means payload validation
failed due to bad payload. If the error has no message but includes a scheme name (e.g.
Boom.unauthorized(null, 'Custom')), authentication may still be successful if the route
auth.payload configuration is set to 'optional'.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const scheme = function (server, options) {
return {
authenticate: function (request, h) {
const req = request.raw.req;
const authorization = req.headers.authorization;
if (!authorization) {
throw Boom.unauthorized(null, 'Custom');
}
return h.authenticated({ credentials: { user: 'john' } });
}
};
};
server.auth.scheme('custom', scheme);Registers an authentication strategy where:
name- the strategy name.scheme- the scheme name (must be previously registered usingserver.auth.scheme()).options- scheme options based on the scheme requirements.
Return value: none.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.auth.scheme('custom', scheme);
server.auth.strategy('default', 'custom');
server.route({
method: 'GET',
path: '/',
options: {
auth: 'default',
handler: function (request, h) {
return request.auth.credentials.user;
}
}
});Tests a request against an authentication strategy where:
strategy- the strategy name registered withserver.auth.strategy().request- the request object.
Return value: an object containing the authentication credentials and artifacts if authentication
was successful, otherwise throws an error.
Note that the test() method does not take into account the route authentication configuration. It
also does not perform payload authentication. It is limited to the basic strategy authentication
execution. It does not include verifying scope, entity, or other route properties.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.auth.scheme('custom', scheme);
server.auth.strategy('default', 'custom');
server.route({
method: 'GET',
path: '/',
handler: async function (request, h) {
try {
const { credentials, artifacts } = await request.server.auth.test('default', request);
return { status: true, user: credentials.name };
}
catch (err) {
return { status: false };
}
}
});Verify a request's authentication credentials against an authentication strategy where:
request- the request object.
Return value: nothing if verification was successful, otherwise throws an error.
Note that the verify() method does not take into account the route authentication configuration
or any other information from the request other than the request.auth object. It also does not
perform payload authentication. It is limited to verifying that the previously valid credentials
are still valid (e.g. have not been revoked or expired). It does not include verifying scope,
entity, or other route properties.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.auth.scheme('custom', scheme);
server.auth.strategy('default', 'custom');
server.route({
method: 'GET',
path: '/',
handler: async function (request, h) {
try {
const credentials = await request.server.auth.verify(request);
return { status: true, user: credentials.name };
}
catch (err) {
return { status: false };
}
}
});Sets a global context used as the default bind object when adding a route or an extension where:
context- the object used to bindthisin lifecycle methods such as the route handler and extension methods. The context is also made available ash.context.
Return value: none.
When setting a context inside a plugin, the context is applied only to methods set up by the plugin. Note that the context applies only to routes and extensions added after it has been set. Ignored if the method being bound is an arrow function.
const handler = function (request, h) {
return this.message; // Or h.context.message
};
exports.plugin = {
name: 'example',
register: function (server, options) {
const bind = {
message: 'hello'
};
server.bind(bind);
server.route({ method: 'GET', path: '/', handler });
}
};Provisions a cache segment within the server cache facility where:
-
options- catbox policy configuration where:-
expiresIn- relative expiration expressed in the number of milliseconds since the item was saved in the cache. Cannot be used together withexpiresAt. -
expiresAt- time of day expressed in 24h notation using the 'HH:MM' format, at which point all cache records expire. Uses local time. Cannot be used together withexpiresIn. -
generateFunc- a function used to generate a new cache item if one is not found in the cache when callingget(). The method's signature isasync function(id, flags)where:- `id` - the `id` string or object provided to the `get()` method. - `flags` - an object used to pass back additional flags to the cache where: - `ttl` - the cache ttl value in milliseconds. Set to `0` to skip storing in the cache. Defaults to the cache global policy. -
staleIn- number of milliseconds to mark an item stored in cache as stale and attempt to regenerate it whengenerateFuncis provided. Must be less thanexpiresIn. -
staleTimeout- number of milliseconds to wait before checking if an item is stale. -
generateTimeout- number of milliseconds to wait before returning a timeout error when thegenerateFuncfunction takes too long to return a value. When the value is eventually returned, it is stored in the cache for future requests. Required ifgenerateFuncis present. Set tofalseto disable timeouts which may cause allget()requests to get stuck forever. -
generateOnReadError- iffalse, an upstream cache read error will stop thecache.get()method from calling the generate function and will instead pass back the cache error. Defaults totrue. -
generateIgnoreWriteError- iffalse, an upstream cache write error when callingcache.get()will be passed back with the generated value when calling. Defaults totrue. -
dropOnError- iftrue, an error or timeout in thegenerateFunccauses the stale value to be evicted from the cache. Defaults totrue. -
pendingGenerateTimeout- number of milliseconds whilegenerateFunccall is in progress for a given id, before a subsequentgenerateFunccall is allowed. Defaults to0(no blocking of concurrentgenerateFunccalls beyondstaleTimeout). -
cache- the cache name configured inserver.cache. Defaults to the default cache. -
segment- string segment name, used to isolate cached items within the cache partition. When called within a plugin, defaults to '!name' where 'name' is the plugin name. When called within a server method, defaults to '#name' where 'name' is the server method name. Required when called outside of a plugin. -
shared- iftrue, allows multiple cache provisions to share the same segment. Default tofalse.
-
Return value: a catbox policy object.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
const cache = server.cache({ segment: 'countries', expiresIn: 60 * 60 * 1000 });
await cache.set('norway', { capital: 'oslo' });
const value = await cache.get('norway');
}Provisions a server cache as described in server.cache where:
options- same as the servercacheconfiguration options.
Return value: none.
Note that if the server has been initialized or started, the cache will be automatically started to match the state of any other provisioned server cache.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
await server.initialize();
await server.cache.provision({ provider: require('@hapi/catbox-memory'), name: 'countries' });
const cache = server.cache({ cache: 'countries', expiresIn: 60 * 60 * 1000 });
await cache.set('norway', { capital: 'oslo' });
const value = await cache.get('norway');
}Links another server to the initialize/start/stop state of the current server by calling the
controlled server initialize()/start()/stop() methods whenever the current server methods
are called, where:
server- the hapi server object to be controlled.
Registers a custom content decoding compressor to extend the built-in support for 'gzip' and
'deflate' where:
-
encoding- the decoder name string. -
decoder- a function using the signaturefunction(options)whereoptionsare the encoding specific options configured in the routepayload.compressionconfiguration option, and the return value is an object compatible with the output of node'szlib.createGunzip().
Return value: none.
const Zlib = require('zlib');
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80, routes: { payload: { compression: { special: { chunkSize: 16 * 1024 } } } } });
server.decoder('special', (options) => Zlib.createGunzip(options));Extends various framework interfaces with custom methods where:
-
type- the interface being decorated. Supported types:'handler'- adds a new handler type to be used in routes handlers.'request'- adds methods to the Request object.'response'- adds methods to the Response object.'server'- adds methods to the Server object.'toolkit'- adds methods to the response toolkit.
-
property- the object decoration key name or symbol. -
method- the extension function or other value. -
options- (optional) supports the following optional settings:apply- when thetypeis'request', iftrue, themethodfunction is invoked using the signaturefunction(request)whererequestis the current request object and the returned value is assigned as the decoration.extend- iftrue, overrides an existing decoration. Themethodmust be a function with the signaturefunction(existing)where:existing- is the previously set decoration method value.- must return the new decoration function or value.
- cannot be used to extend handler decorations.
Return value: none.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const success = function () {
return this.response({ status: 'ok' });
};
server.decorate('toolkit', 'success', success);
server.route({
method: 'GET',
path: '/',
handler: function (request, h) {
return h.success();
}
});When registering a handler decoration, the method must be a function using the signature
function(route, options) where:
route- the route information.options- the configuration object provided in the handler config.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ host: 'localhost', port: 8000 });
// Defines new handler for routes on this server
const handler = function (route, options) {
return function (request, h) {
return 'new handler: ' + options.msg;
}
};
server.decorate('handler', 'test', handler);
server.route({
method: 'GET',
path: '/',
handler: { test: { msg: 'test' } }
});
await server.start();
}The method function can have a defaults object or function property. If the property is set to
an object, that object is used as the default route config for routes using this handler. If the
property is set to a function, the function uses the signature function(method) and returns the
route default configuration.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ host: 'localhost', port: 8000 });
const handler = function (route, options) {
return function (request, h) {
return 'new handler: ' + options.msg;
}
};
// Change the default payload processing for this handler
handler.defaults = {
payload: {
output: 'stream',
parse: false
}
};
server.decorate('handler', 'test', handler);Used within a plugin to declare a required dependency on other plugins required for the current plugin to operate (plugins listed must be registered before the server is initialized or started) where:
-
dependencies- one of:- a single plugin name string.
- an array of plugin name strings.
- an object where each key is a plugin name and each matching value is a version range string which must match the registered plugin version.
-
after- (optional) a function that is called after all the specified dependencies have been registered and before the server starts. The function is only called if the server is initialized or started. The function signature isasync function(server)where:server- the server thedependency()method was called on.
Return value: none.
The after method is identical to setting a server extension point on 'onPreStart'.
If a circular dependency is detected, an exception is thrown (e.g. two plugins each has an after
function to be called after the other).
const after = function (server) {
// Additional plugin registration logic
};
exports.plugin = {
name: 'example',
register: function (server, options) {
server.dependency('yar', after);
}
};Dependencies can also be set via the plugin dependencies property (does not support setting
after):
exports.plugin = {
name: 'test',
version: '1.0.0',
dependencies: {
yar: '1.x.x'
},
register: function (server, options) { }
};The dependencies configuration accepts one of:
- a single plugin name string.
- an array of plugin name strings.
- an object where each key is a plugin name and each matching value is a version range string which must match the registered plugin version.
Registers a custom content encoding compressor to extend the built-in support for 'gzip' and
'deflate' where:
-
encoding- the encoder name string. -
encoder- a function using the signaturefunction(options)whereoptionsare the encoding specific options configured in the routecompressionoption, and the return value is an object compatible with the output of node'szlib.createGzip().
Return value: none.
const Zlib = require('zlib');
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80, routes: { compression: { special: { chunkSize: 16 * 1024 } } } });
server.encoder('special', (options) => Zlib.createGzip(options));Register custom application events where:
-
events- must be one of:-
an event name string.
-
an event options object with the following optional keys (unless noted otherwise):
-
name- the event name string (required). -
channels- a string or array of strings specifying the event channels available. Defaults to no channel restrictions (event updates can specify a channel or not). -
clone- iftrue, thedataobject passed toserver.events.emit()is cloned before it is passed to the listeners (unless an override specified by each listener). Defaults tofalse(datais passed as-is). -
spread- iftrue, thedataobject passed toserver.event.emit()must be an array and thelistenermethod is called with each array element passed as a separate argument (unless an override specified by each listener). This should only be used when the emitted data structure is known and predictable. Defaults tofalse(datais emitted as a single argument regardless of its type). -
tags- iftrueand thecriteriaobject passed toserver.event.emit()includestags, the tags are mapped to an object (where each tag string is the key and the value istrue) which is appended to the arguments list at the end. A configuration override can be set by each listener. Defaults tofalse. -
shared- iftrue, the same eventnamecan be registered multiple times where the second registration is ignored. Note that if the registration config is changed between registrations, only the first configuration is used. Defaults tofalse(a duplicate registration will throw an error).
-
-
an array containing any of the above.
-
Return value: none.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
server.event('test');
server.events.on('test', (update) => console.log(update));
await server.events.gauge('test', 'hello');
}Emits a custom application event to all the subscribed listeners where:
-
criteria- the event update criteria which must be one of:- the event name string.
- an object with the following optional keys (unless noted otherwise):
name- the event name string (required).channel- the channel name string.tags- a tag string or array of tag strings.
-
data- the value emitted to the subscribers. Ifdatais a function, the function signature isfunction()and it called once to generate (return value) the actual data emitted to the listeners. If no listeners match the event, thedatafunction is not invoked.
Return value: none.
Note that events must be registered before they can be emitted or subscribed to by calling server.event(events). This is done to detect event name misspelling and invalid event activities.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
server.event('test');
server.events.on('test', (update) => console.log(update));
server.events.emit('test', 'hello');
}Subscribe to an event where:
-
criteria- the subscription criteria which must be one of:-
event name string which can be any of the built-in server events or a custom application event registered with
server.event(). -
a criteria object with the following optional keys (unless noted otherwise):
-
name- (required) the event name string. -
channels- a string or array of strings specifying the event channels to subscribe to. If the event registration specified a list of allowed channels, thechannelsarray must match the allowed channels. Ifchannelsare specified, event updates without any channel designation will not be included in the subscription. Defaults to no channels filter. -
clone- iftrue, thedataobject passed toserver.event.emit()is cloned before it is passed to thelistenermethod. Defaults to the event registration option (which defaults tofalse). -
count- a positive integer indicating the number of times thelistenercan be called after which the subscription is automatically removed. A count of1is the same as callingserver.events.once(). Defaults to no limit. -
filter- the event tags (if present) to subscribe to which can be one of:-
a tag string.
-
an array of tag strings.
-
an object with the following:
tags- a tag string or array of tag strings.all- iftrue, alltagsmust be present for the event update to match the subscription. Defaults tofalse(at least one matching tag).
-
-
spread- iftrue, and thedataobject passed toserver.event.emit()is an array, thelistenermethod is called with each array element passed as a separate argument. This should only be used when the emitted data structure is known and predictable. Defaults to the event registration option (which defaults tofalse). -
tags- iftrueand thecriteriaobject passed toserver.event.emit()includestags, the tags are mapped to an object (where each tag string is the key and the value istrue) which is appended to the arguments list at the end. Defaults to the event registration option (which defaults tofalse).
-
-
-
listener- the handler method set to receive event updates. The function signature depends on the event argument, and thespreadandtagsoptions. -
context- an object that binds to the listener handler.
Return value: none.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
server.event('test');
server.events.on('test', (update) => console.log(update));
server.events.emit('test', 'hello');
}Same as calling server.events.on() with the count option set to 1.
Return value: none.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
server.event('test');
server.events.once('test', (update) => console.log(update));
server.events.emit('test', 'hello');
server.events.emit('test', 'hello'); // Ignored
}Same as calling server.events.on() with the count option set to 1.
Return value: a promise that resolves when the event is emitted.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
server.event('test');
const pending = server.events.once('test');
server.events.emit('test', 'hello');
const update = await pending;
}Behaves identically to server.events.emit(), but also returns an array of the results of all the event listeners that run. The return value is that of Promise.allSettled(), where each item in the resulting array is { status: 'fulfilled', value } in the case of a successful handler, or { status: 'rejected', reason } in the case of a handler that throws.
Please note that system errors such as a TypeError are not handled specially, and it's recommended to scrutinize any rejections using something like bounce.
Used within a plugin to expose a property via server.plugins[name] where:
key- the key assigned (server.plugins[name][key]).value- the value assigned.options- optional settings:scope- controls how to handle the presence of a plugin scope in the name (e.g.@hapi/test):false- the scope is removed (e.g.@hapi/testis changed totestunderserver.plugins). This is the default.true- the scope is retained as-is (e.g.@hapi/testis used asserver.plugins['@hapi/test']).'underscore'- the scope is rewritten (e.g.@hapi/testis used asserver.plugins.hapi__test).
Return value: none.
exports.plugin =
name: 'example',
register: function (server, options) {
server.expose('util', () => console.log('something'));
}
};Merges an object into to the existing content of server.plugins[name] where:
obj- the object merged into the exposed properties container.
Return value: none.
exports.plugin = {
name: 'example',
register: function (server, options) {
server.expose({ util: () => console.log('something') });
}
};Note that all the properties of obj are deeply cloned into server.plugins[name],
so avoid using this method for exposing large objects that may be expensive to clone or singleton
objects such as database client objects. Instead favor server.expose(key, value),
which only copies a reference to value.
Registers an extension function in one of the request lifecycle extension points where:
-
events- an object or array of objects with the following:-
type- (required) the extension point event name. The available extension points include the request extension points as well as the following server extension points:'onPreStart'- called before the connection listeners are started.'onPostStart'- called after the connection listeners are started.'onPreStop'- called before the connection listeners are stopped.'onPostStop'- called after the connection listeners are stopped.
-
method- (required) a function or an array of functions to be executed at a specified point during request processing. The required extension function signature is:-
server extension points:
async function(server)where:server- the server object.this- the object provided viaoptions.bindor the current active context set withserver.bind().
-
request extension points: a lifecycle method.
-
-
options- (optional) an object with the following:-
before- a string or array of strings of plugin names this method must execute before (on the same event). Otherwise, extension methods are executed in the order added. -
after- a string or array of strings of plugin names this method must execute after (on the same event). Otherwise, extension methods are executed in the order added. -
bind- a context object passed back to the provided method (viathis) when called. Ignored if the method is an arrow function. -
sandbox- if set to'plugin'when adding a request extension points the extension is only added to routes defined by the current plugin. Not allowed when configuring route-level extensions, or when adding server extensions. Defaults to'server'which applies to any route added to the server the extension is added to. -
timeout- number of milliseconds to wait for themethodto complete before returning a timeout error. Defaults to no timeout.
-
-
Return value: none.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
server.ext({
type: 'onRequest',
method: function (request, h) {
// Change all requests to '/test'
request.setUrl('/test');
return h.continue;
}
});
server.route({ method: 'GET', path: '/test', handler: () => 'ok' });
await server.start();
// All requests will get routed to '/test'
}Registers a single extension event using the same properties as used in server.ext(events), but passed as arguments.
The method may be omitted (if options isn't present) or passed null which will cause the function to return a promise. The promise is resolved with the request object on the first invocation of the extension point. This is primarily used for writing tests without having to write custom handlers just to handle a single event.
Return value: a promise if method is omitted, otherwise undefined.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
server.ext('onRequest', function (request, h) {
// Change all requests to '/test'
request.setUrl('/test');
return h.continue;
});
server.route({ method: 'GET', path: '/test', handler: () => 'ok' });
await server.start();
// All requests will get routed to '/test'
}Initializes the server (starts the caches, finalizes plugin registration) but does not start listening on the connection port.
Return value: none.
Note that if the method fails and throws an error, the server is considered to be in an undefined
state and should be shut down. In most cases it would be impossible to fully recover as the various
plugins, caches, and other event listeners will get confused by repeated attempts to start the
server or make assumptions about the healthy state of the environment. It is recommended to abort
the process when the server fails to start properly. If you must try to resume after an error, call
server.stop() first to reset the server state.
const Hapi = require('@hapi/hapi');
const Hoek = require('@hapi/hoek');
async function example() {
const server = Hapi.server({ port: 80 });
await server.initialize();
}Injects a request into the server simulating an incoming HTTP request without making an actual socket connection. Injection is useful for testing purposes as well as for invoking routing logic internally without the overhead and limitations of the network stack.
The method utilizes the shot module for performing injections, with some additional options and response properties:
-
options- can be assigned a string with the requested URI, or an object with:-
method- (optional) the request HTTP method (e.g.'POST'). Defaults to'GET'. -
url- (required) the request URL. If the URI includes an authority (e.g.'example.com:8080'), it is used to automatically set an HTTP 'Host' header, unless one was specified inheaders. -
authority- (optional) a string specifying the HTTP 'Host' header value. Only used if 'Host' is not specified inheadersand theurldoes not include an authority component. Default is inferred from runtime server information. -
headers- (optional) an object with optional request headers where each key is the header name and the value is the header content. Defaults to no additions to the default shot headers. -
payload- (optional) an string, buffer or object containing the request payload. In case of an object it will be converted to a string for you. Defaults to no payload. Note that payload processing defaults to'application/json'if no 'Content-Type' header provided. -
auth- (optional) an object containing parsed authentication credentials where:-
strategy- (required) the authentication strategy name matching the provided credentials. -
credentials- (required) a credentials object containing authentication information. Thecredentialsare used to bypass the default authentication strategies, and are validated directly as if they were received via an authentication scheme. -
artifacts- (optional) an artifacts object containing authentication artifact information. Theartifactsare used to bypass the default authentication strategies, and are validated directly as if they were received via an authentication scheme. Defaults to no artifacts. -
payload- (optional) disables payload authentication when set to false. Only required when an authentication strategy requires payload authentication. Defaults totrue.
-
-
app- (optional) sets the initial value ofrequest.app, defaults to{}. -
plugins- (optional) sets the initial value ofrequest.plugins, defaults to{}. -
allowInternals- (optional) allows access to routes withoptions.isInternalset totrue. Defaults tofalse. -
remoteAddress- (optional) sets the remote address for the incoming connection. -
simulate- (optional) an object with options used to simulate client request stream conditions for testing:-
error- iftrue, emits an'error'event after payload transmission (if any). Defaults tofalse. -
close- iftrue, emits a'close'event after payload transmission (if any). Defaults tofalse. -
end- iffalse, does not end the stream. Defaults totrue. -
split- indicates whether the request payload will be split into chunks. Defaults toundefined, meaning payload will not be chunked.
-
-
validate- (optional) iffalse, theoptionsinputs are not validated. This is recommended for run-time usage ofinject()to make it perform faster where input validation can be tested separately.
-
Return value: a response object with the following properties:
-
statusCode- the HTTP status code. -
headers- an object containing the headers set. -
payload- the response payload string. -
rawPayload- the raw response payload buffer. -
raw- an object with the injection request and response objects:req- the simulated node request object.res- the simulated node response object.
-
result- the raw handler response (e.g. when not a stream or a view) before it is serialized for transmission. If not available, the value is set topayload. Useful for inspection and reuse of the internal objects returned (instead of parsing the response string). -
request- the request object.
Throws a Boom error if the request processing fails. The partial response object is exposed on
the data property.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
server.route({ method: 'GET', path: '/', handler: () => 'Success!' });
const res = await server.inject('/');
console.log(res.result); // 'Success!'
}Logs server events that cannot be associated with a specific request. When called the server emits
a 'log' event which can be used by other listeners or plugins to record the
information or output to the console. The arguments are:
-
tags- (required) a string or an array of strings (e.g.['error', 'database', 'read']) used to identify the event. Tags are used instead of log levels and provide a much more expressive mechanism for describing and filtering events. Any logs generated by the server internally include the'hapi'tag along with event-specific information. -
data- (optional) an message string or object with the application data being logged. Ifdatais a function, the function signature isfunction()and it called once to generate (return value) the actual data emitted to the listeners. If no listeners match the event, thedatafunction is not invoked. -
timestamp- (optional) an timestamp expressed in milliseconds. Defaults toDate.now()(now).
Return value: none.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.events.on('log', (event, tags) => {
if (tags.error) {
console.log(event);
}
});
server.log(['test', 'error'], 'Test event');Looks up a route configuration where:
id- the route identifier.
Return value: the route information if found, otherwise null.
const Hapi = require('@hapi/hapi');
const server = Hapi.server();
server.route({
method: 'GET',
path: '/',
options: {
id: 'root',
handler: () => 'ok'
}
});
const route = server.lookup('root');Looks up a route configuration where:
method- the HTTP method (e.g. 'GET', 'POST').path- the requested path (must begin with '/').host- (optional) hostname (to match against routes withvhost).
Return value: the route information if found, otherwise null.
const Hapi = require('@hapi/hapi');
const server = Hapi.server();
server.route({
method: 'GET',
path: '/',
options: {
id: 'root',
handler: () => 'ok'
}
});
const route = server.match('get', '/');Registers a server method where:
-
name- a unique method name used to invoke the method viaserver.methods[name]. -
method- the method function with a signatureasync function(...args, [flags])where:...args- the method function arguments (can be any number of arguments or none).flags- when caching is enabled, an object used to set optional method result flags. This parameter is provided automatically and can only be accessed/modified within the method function. It cannot be passed as an argument.ttl-0if result is valid but cannot be cached. Defaults to cache policy.
-
options- (optional) configuration object:-
bind- a context object passed back to the method function (viathis) when called. Defaults to active context (set viaserver.bind()when the method is registered. Ignored if the method is an arrow function. -
cache- the same cache configuration used inserver.cache(). ThegenerateTimeoutoption is required, and thegenerateFuncoptions is not allowed. -
generateKey- a function used to generate a unique key (for caching) from the arguments passed to the method function (theflagsargument is not passed as input). The server will automatically generate a unique key if the function's arguments are all of types'string','number', or'boolean'. However if the method uses other types of arguments, a key generation function must be provided which takes the same arguments as the function and returns a unique string (ornullif no key can be generated).
-
Return value: none.
Method names can be nested (e.g. utils.users.get) which will automatically create the full path
under server.methods (e.g. accessed via server.methods.utils.users.get).
When configured with caching enabled, server.methods[name].cache is assigned an object with the
following properties and methods:
- await drop(...args) - a function that can be used to clear the cache for a given key.
- stats - an object with cache statistics, see catbox for stats documentation.
Simple arguments example:
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
const add = (a, b) => (a + b);
server.method('sum', add, { cache: { expiresIn: 2000, generateTimeout: 100 } });
console.log(await server.methods.sum(4, 5)); // 9
}Object argument example:
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
const addArray = function (array) {
let sum = 0;
array.forEach((item) => {
sum += item;
});
return sum;
};
const options = {
cache: { expiresIn: 2000, generateTimeout: 100 },
generateKey: (array) => array.join(',')
};
server.method('sumObj', addArray, options);
console.log(await server.methods.sumObj([5, 6])); // 11
}Registers a server method function as described in server.method() using a
configuration object where:
-
methods- an object or an array of objects where each one contains:name- the method name.method- the method function.options- (optional) settings.
Return value: none.
const add = function (a, b) {
return a + b;
};
server.method({
name: 'sum',
method: add,
options: {
cache: {
expiresIn: 2000,
generateTimeout: 100
}
}
});Sets the path prefix used to locate static resources (files and view templates) when relative paths are used where:
relativeTo- the path prefix added to any relative file path starting with'.'.
Return value: none.
Note that setting a path within a plugin only applies to resources accessed by plugin methods.
If no path is set, the server default route configuration
files.relativeTo settings is used. The path only applies to routes added
after it has been set.
exports.plugin = {
name: 'example',
register: function (server, options) {
// Assuming the Inert plugin was registered previously
server.path(__dirname + '../static');
server.route({ path: '/file', method: 'GET', handler: { file: './test.html' } });
}
};Registers a plugin where:
-
plugins- one or an array of:-
an object with the following:
plugin- a plugin object.options- (optional) options passed to the plugin during registration.once,routes- (optional) plugin-specific registration options as defined below.
-
options- (optional) registration options (different from the options passed to the registration function):-
once- iftrue, subsequent registrations of the same plugin are skipped without error. Cannot be used with plugin options. Defaults tofalse. If not set totrue, an error will be thrown the second time a plugin is registered on the server. -
routes- modifiers applied to each route added by the plugin:prefix- string added as prefix to any route path (must begin with'/'). If a plugin registers a child plugin theprefixis passed on to the child or is added in front of the child-specific prefix.vhost- virtual host string (or array of strings) applied to every route. The outer-mostvhostoverrides the any nested configuration.
-
Return value: a reference to the server.
async function example() {
await server.register({ plugin: require('plugin_name'), options: { message: 'hello' } });
}Adds a route where:
-
route- a route configuration object or an array of configuration objects where each object contains:-
path- (required) the absolute path used to match incoming requests (must begin with '/'). Incoming requests are compared to the configured paths based on the server'srouterconfiguration. The path can include named parameters enclosed in{}which will be matched against literal values in the request as described in Path parameters. -
method- (required) the HTTP method. Typically one of 'GET', 'POST', 'PUT', 'PATCH', 'DELETE', or 'OPTIONS'. Any HTTP method is allowed, except for 'HEAD'. Use'*'to match against any HTTP method (only when an exact match was not found, and any match with a specific method will be given a higher priority over a wildcard match). Can be assigned an array of methods which has the same result as adding the same route with different methods manually. -
vhost- (optional) a domain string or an array of domain strings for limiting the route to only requests with a matching host header field. Matching is done against the hostname part of the header only (excluding the port). Defaults to all hosts. -
handler- (required whenhandleris not set) the route handler function called to generate the response after successful authentication and validation. -
options- additional route options. Theoptionsvalue can be an object or a function that returns an object using the signaturefunction(server)whereserveris the server the route is being added to andthisis bound to the current realm'sbindoption. -
rules- route custom rules object. The object is passed to each rules processor registered withserver.rules(). Cannot be used ifroute.options.rulesis defined.
-
Return value: none.
Note that the options object is deeply cloned (with the exception of bind which is shallowly
copied) and cannot contain any values that are unsafe to perform deep copy on.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
// Handler in top level
server.route({ method: 'GET', path: '/status', handler: () => 'ok' });
// Handler in config
const user = {
cache: { expiresIn: 5000 },
handler: function (request, h) {
return { name: 'John' };
}
};
server.route({ method: 'GET', path: '/user', options: user });
// An array of routes
server.route([
{ method: 'GET', path: '/1', handler: function (request, h) { return 'ok'; } },
{ method: 'GET', path: '/2', handler: function (request, h) { return 'ok'; } }
]);Parameterized paths are processed by matching the named parameters to the content of the incoming
request path at that path segment. For example, '/book/{id}/cover' will match '/book/123/cover' and
request.params.id will be set to '123'. Each path segment (everything between the opening '/'
and the closing '/' unless it is the end of the path) can only include one named parameter. A
parameter can cover the entire segment ('/{param}') or part of the segment ('/file.{ext}'). A path
parameter may only contain letters, numbers and underscores, e.g. '/{file-name}' is invalid
and '/{file_name}' is valid.
An optional '?' suffix following the parameter name indicates an optional parameter (only allowed
if the parameter is at the ends of the path or only covers part of the segment as in
'/a{param?}/b'). For example, the route '/book/{id?}' matches '/book/' with the value of
request.params.id set to an empty string ''.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const getAlbum = function (request, h) {
return 'You asked for ' +
(request.params.song ? request.params.song + ' from ' : '') +
request.params.album;
};
server.route({
path: '/{album}/{song?}',
method: 'GET',
handler: getAlbum
});In addition to the optional ? suffix, a parameter name can also specify the number of matching
segments using the * suffix, followed by a number greater than 1. If the number of expected parts
can be anything, then use * without a number (matching any number of segments can only be used in
the last path segment).
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const getPerson = function (request, h) {
const nameParts = request.params.name.split('/');
return { first: nameParts[0], last: nameParts[1] };
};
server.route({
path: '/person/{name*2}', // Matches '/person/john/doe'
method: 'GET',
handler: getPerson
});The router iterates through the routing table on each incoming request and executes the first (and only the first) matching route. Route matching is done based on the combination of the request path and the HTTP verb (e.g. 'GET, 'POST'). The query is excluded from the routing logic. Requests are matched in a deterministic order where the order in which routes are added does not matter.
Routes are matched based on the specificity of the route which is evaluated at each segment of the
incoming request path. Each request path is split into its segment (the parts separated by '/').
The segments are compared to the routing table one at a time and are matched against the most
specific path until a match is found. If no match is found, the next match is tried.
When matching routes, string literals (no path parameter) have the highest priority, followed by
mixed parameters ('/a{p}b'), parameters ('/{p}'), and then wildcard (/{p*}).
Note that mixed parameters are slower to compare as they cannot be hashed and require an array iteration over all the regular expressions representing the various mixed parameter at each routing table node.
If the application needs to override the default Not Found (404) error response, it can add a catch-all route for a specific method or all methods. Only one catch-all route can be defined.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const handler = function (request, h) {
return h.response('The page was not found').code(404);
};
server.route({ method: '*', path: '/{p*}', handler });Defines a route rules processor for converting route rules object into route configuration where:
-
processor- a function using the signaturefunction(rules, info)where:rules- the custom object defined in your routes configuration for you to use its values.info- an object with the following properties:method- the route method.path- the route path.vhost- the route virtual host (if any defined).
- returns a route config object.
-
options- optional settings:validate- rules object validation:schema- joi schema.options- optional joi validation options. Defaults to{ allowUnknown: true }.
Note that the root server and each plugin server instance can only register one rules processor. If a route is added after the rules are configured, it will not include the rules config. Routes added by plugins apply the rules to each of the parent realms' rules from the root to the route's realm. This means the processor defined by the plugin overrides the config generated by the root processor if they overlap. Similarly, the route's own config overrides the config produced by the rules processors.
const validateSchema = {
auth: Joi.string(),
myCustomPre: Joi.array().min(2).items(Joi.string()),
payload: Joi.object()
};
const myPreHelper = (name) => {
return {
method: (request, h) => {
return `hello ${name || 'world'}!`;
},
assign: 'myPreHelper'
};
};
const processor = (rules, info) => {
if (!rules) {
return null;
}
const options = {};
if (rules.auth) {
options.auth = {
strategy: rules.auth,
validate: {
entity: 'user'
}
};
}
if (rules.myCustomPre) {
options.pre = [
myPreHelper(...rules.myCustomPre)
];
}
if (rules.payload) {
options.validate = { payload: Joi.object(rules.payload) };
}
return options;
};
server.rules(processor, {
validate: { schema: validateSchema }
});
server.route({
method: 'GET',
path: '/',
rules: {
auth: 'jwt',
myCustomPre: ['arg1', 'arg2'],
payload: { a: Joi.boolean(), b: Joi.string() }
},
options: {
id: 'my-route'
}
});Starts the server by listening for incoming requests on the configured port (unless the connection
was configured with autoListen set to false).
Return value: none.
Note that if the method fails and throws an error, the server is considered to be in an undefined
state and should be shut down. In most cases it would be impossible to fully recover as the various
plugins, caches, and other event listeners will get confused by repeated attempts to start the
server or make assumptions about the healthy state of the environment. It is recommended to abort
the process when the server fails to start properly. If you must try to resume after an error, call
server.stop() first to reset the server state.
If a started server is started again, the second call to server.start() is ignored. No events
will be emitted and no extension points invoked.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
await server.start();
console.log('Server started at: ' + server.info.uri);
}HTTP state management uses client cookies to persist a state across multiple requests. Registers a cookie definitions where:
-
name- the cookie name string. -
options- are the optional cookie settings:-
ttl- time-to-live in milliseconds. Defaults tonull(session time-life - cookies are deleted when the browser is closed). -
isSecure- sets the 'Secure' flag. Defaults totrue. -
isHttpOnly- sets the 'HttpOnly' flag. Defaults totrue. -
isSameSite- sets the 'SameSite' flag. The value must be one of:false- no flag.'Strict'- sets the value to'Strict'(this is the default value).'Lax'- sets the value to'Lax'.'None'- sets the value to'None'.
-
path- the path scope. Defaults tonull(no path). -
domain- the domain scope. Defaults tonull(no domain). -
autoValue- if present and the cookie was not received from the client or explicitly set by the route handler, the cookie is automatically added to the response with the provided value. The value can be a function with signatureasync function(request)where:request- the request object.
-
encoding- encoding performs on the provided value before serialization. Options are:'none'- no encoding. When used, the cookie value must be a string. This is the default value.'base64'- string value is encoded using Base64.'base64json'- object value is JSON-stringified then encoded using Base64.'form'- object value is encoded using the x-www-form-urlencoded method.'iron'- Encrypts and sign the value using iron.
-
sign- an object used to calculate an HMAC for cookie integrity validation. This does not provide privacy, only a mean to verify that the cookie value was generated by the server. Redundant when'iron'encoding is used. Options are:integrity- algorithm options. Defaults torequire('iron').defaults.integrity.password- password used for HMAC key generation (must be at least 32 characters long).
-
password- password used for'iron'encoding (must be at least 32 characters long). -
iron- options for'iron'encoding. Defaults torequire('iron').defaults. -
ignoreErrors- iftrue, errors are ignored and treated as missing cookies. -
clearInvalid- iftrue, automatically instruct the client to remove invalid cookies. Defaults tofalse. -
strictHeader- iffalse, allows any cookie value including values in violation of RFC 6265. Defaults totrue. -
passThrough- used by proxy plugins (e.g. h2o2). -
contextualize- a function using the signatureasync function(definition, request)used to override a request-specific cookie settings where:definition- a copy of theoptionsto be used for formatting the cookie that can be manipulated by the function to customize the request cookie header. Note that changing thedefinition.contextualizeproperty will be ignored.request- the current request object.
-
Return value: none.
State defaults can be modified via the server.options.state configuration option.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
// Set cookie definition
server.state('session', {
ttl: 24 * 60 * 60 * 1000, // One day
isSecure: true,
path: '/',
encoding: 'base64json'
});
// Set state in route handler
const handler = function (request, h) {
let session = request.state.session;
if (!session) {
session = { user: 'joe' };
}
session.last = Date.now();
return h.response('Success').state('session', session);
};Registered cookies are automatically parsed when received. Parsing rules depends on the route
state.parse configuration. If an incoming registered cookie fails parsing,
it is not included in request.state, regardless of the
state.failAction setting. When state.failAction
is set to 'log' and an invalid cookie value is received, the server will emit a
'request' event. To capture these errors subscribe to the 'request'
event on the 'internal' channel and filter on 'error' and 'state' tags:
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.events.on({ name: 'request', channels: 'internal' }, (request, event, tags) => {
if (tags.error && tags.state) {
console.error(event);
}
});Access: read only.
Same as calling server.state().
Formats an HTTP 'Set-Cookie' header based on the server.options.state
where:
cookies- a single object or an array of object where each contains:name- the cookie name.value- the cookie value.options- cookie configuration to override the server settings.
Return value: a header string.
Note that this utility uses the server configuration but does not change the server state. It is provided for manual cookie formatting (e.g. when headers are set manually).
Parses an HTTP 'Cookies' header based on the server.options.state where:
header- the HTTP header.
Return value: an object where each key is a cookie name and value is the parsed cookie.
Note that this utility uses the server configuration but does not change the server state. It is provided for manual cookie parsing (e.g. when server parsing is disabled).
Stops the server's listener by refusing to accept any new connections or requests (existing connections will continue until closed or timeout), where:
-
options- (optional) object with:timeout- sets the timeout in millisecond before forcefully terminating any open connections that arrived before the server stopped accepting new connections. The timeout only applies to waiting for existing connections to close, and not to any'onPreStop'or'onPostStop'server extensions which can delay or block the stop operation indefinitely. Ignored ifserver.options.operations.cleanStopisfalse. Note that if the server is set as a group controller, the timeout is per controlled server and the controlling server itself. Defaults to5000(5 seconds).
Return value: none.
const Hapi = require('@hapi/hapi');
async function example() {
const server = Hapi.server({ port: 80 });
await server.start();
await server.stop({ timeout: 60 * 1000 });
console.log('Server stopped');
}Returns a copy of the routing table where:
host- (optional) host to filter routes matching a specific virtual host. Defaults to all virtual hosts.
Return value: an array of routes where each route contains:
settings- the route config with defaults applied.method- the HTTP method in lower case.path- the route path.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.route({ method: 'GET', path: '/example', handler: () => 'ok' });
const table = server.table();Registers a server validation module used to compile raw validation rules into validation schemas for all routes where:
validator- the validation module (e.g. joi).
Return value: none.
Note: the validator is only used when validation rules are not pre-compiled schemas. When a validation rules is a function or schema object, the rule is used as-is and the validator is not used. When setting a validator inside a plugin, the validator is only applied to routes set up by the plugin and plugins registered by it.
const Hapi = require('@hapi/hapi');
const Joi = require('joi');
async function example() {
const server = Hapi.server({ port: 80 });
server.validator(Joi);
}Each route can be customized to change the default behavior of the request lifecycle.
Application-specific route configuration state. Should not be used by plugins which
should use options.plugins[name] instead.
Route authentication configuration. Value can be:
-
falseto disable authentication if a default strategy is set. -
a string with the name of an authentication strategy registered with
server.auth.strategy(). The strategy will be set to'required'mode.
Default value: none.
An object or array of objects specifying the route access rules. Each rule is evaluated against an
incoming request and access is granted if at least one of the rules matches. Each rule object must
include at least one of scope or
entity.
Default value: false (no scope requirements).
The application scope required to access the route. Value can be a scope string or an
array of scope strings. When authenticated, the credentials object scope property must contain
at least one of the scopes defined to access the route.
If a scope string begins with a + character, that scope is required. If a scope string begins
with a ! character, that scope is forbidden. For example, the scope ['!a', '+b', 'c', 'd']
means the incoming request credentials' scope must not include 'a', must include 'b', and must
include one of 'c' or 'd'.
You may also access properties on the request object (query, params, payload, and
credentials) to populate a dynamic scope by using the '{' and '}' characters around the property
name, such as 'user-{params.id}'.
Default value: 'any'.
The required authenticated entity type. If set, must match the entity value of the request
authenticated credentials. Available values:
'any'- the authentication can be on behalf of a user or application.'user'- the authentication must be on behalf of a user which is identified by the presence of a'user'attribute in thecredentialsobject returned by the authentication strategy.'app'- the authentication must be on behalf of an application which is identified by the lack of presence of auserattribute in thecredentialsobject returned by the authentication strategy.
Default value: 'required'.
The authentication mode. Available values:
'required'- authentication is required.'optional'- authentication is optional - the request must include valid credentials or no credentials at all.'try'- similar to'optional', any request credentials are attempted authentication, but if the credentials are invalid, the request proceeds regardless of the authentication error.
Default value: false, unless the scheme requires payload authentication.
If set, the incoming request payload is authenticated after it is processed. Requires a strategy
with payload authentication support (e.g. Hawk). Cannot be
set to a value other than 'required' when the scheme sets the authentication options.payload to
true.
Available values:
false- no payload authentication.'required'- payload authentication required.'optional'- payload authentication performed only when the client includes payload authentication information (e.g.hashattribute in Hawk).
Default value: the default strategy set via server.auth.default().
An array of string strategy names in the order they should be attempted. Cannot be used together
with strategy.
Default value: the default strategy set via server.auth.default().
A string strategy names. Cannot be used together with strategies.
Default value: null.
An object passed back to the provided handler (via this) when called. Ignored if the method is
an arrow function.
Default value: { privacy: 'default', statuses: [200], otherwise: 'no-cache' }.
If the route method is 'GET', the route can be configured to include HTTP caching directives in the response. Caching can be customized using an object with the following options:
-
privacy- determines the privacy flag included in client-side caching using the 'Cache-Control' header. Values are:'default'- no privacy flag.'public'- mark the response as suitable for public caching.'private'- mark the response as suitable only for private caching.
-
expiresIn- relative expiration expressed in the number of milliseconds since the item was saved in the cache. Cannot be used together withexpiresAt. -
expiresAt- time of day expressed in 24h notation using the 'HH:MM' format, at which point all cache records for the route expire. Cannot be used together withexpiresIn. -
statuses- an array of HTTP response status code numbers (e.g.200) which are allowed to include a valid caching directive. -
otherwise- a string with the value of the 'Cache-Control' header when caching is disabled.
The default Cache-Control: no-cache header can be disabled by setting cache to false.
An object where each key is a content-encoding name and each value is an object with the desired
encoder settings. Note that decoder settings are set in compression.
Default value: false (no CORS headers).
The Cross-Origin Resource Sharing protocol allows browsers to make
cross-origin API calls. CORS is required by web applications running inside a browser which are
loaded from a different domain than the API server. To enable, set cors to true, or to an
object with the following options:
-
origin- an array of allowed origin servers strings ('Access-Control-Allow-Origin'). The array can contain any combination of fully qualified origins along with origin strings containing a wildcard'*'character, or a single'*'origin string. If set to'ignore', any incoming Origin header is ignored (present or not) and the 'Access-Control-Allow-Origin' header is set to'*'. Defaults to any origin['*']. -
maxAge- number of seconds the browser should cache the CORS response ('Access-Control-Max-Age'). The greater the value, the longer it will take before the browser checks for changes in policy. Defaults to86400(one day). -
headers- a strings array of allowed headers ('Access-Control-Allow-Headers'). Defaults to['Accept', 'Authorization', 'Content-Type', 'If-None-Match']. -
additionalHeaders- a strings array of additional headers toheaders. Use this to keep the default headers in place. -
exposedHeaders- a strings array of exposed headers ('Access-Control-Expose-Headers'). Defaults to['WWW-Authenticate', 'Server-Authorization']. -
additionalExposedHeaders- a strings array of additional headers toexposedHeaders. Use this to keep the default headers in place. -
credentials- iftrue, allows user credentials to be sent ('Access-Control-Allow-Credentials'). Defaults tofalse. -
preflightStatusCode- the status code used for CORS preflight responses, either200or204. Defaults to200.
Default value: none.
Route description used for generating documentation (string).
This setting is not available when setting server route defaults using
server.options.routes.
Default value: none.
Route-level request extension points by setting the option to an object with
a key for each of the desired extension points ('onRequest' is not allowed), and the value is the
same as the server.ext(events) event argument.
Default value: { relativeTo: '.' }.
Defines the behavior for accessing files:
relativeTo- determines the folder relative paths are resolved against.
Default value: none.
The route handler function performs the main business logic of the route and sets the response.
handler can be assigned:
-
an object with a single property using the name of a handler type registered with the
server.decorate()method. The matching property value is passed as options to the registered handler generator.
const handler = function (request, h) {
return 'success';
};Note: handlers using a fat arrow style function cannot be bound to any bind property. Instead,
the bound context is available under h.context.
Default value: none.
An optional unique identifier used to look up the route using server.lookup().
Cannot be assigned to routes added with an array of methods.
Default value: false.
If true, the route cannot be accessed through the HTTP listener but only through the
server.inject() interface with the allowInternals option set to true.
Used for internal routes that should not be accessible to the outside world.
Default value: none.
Optional arguments passed to JSON.stringify() when converting an object or error response to a
string payload or escaping it after stringification. Supports the following:
-
replacer- the replacer function or array. Defaults to no action. -
space- number of spaces to indent nested object keys. Defaults to no indentation. -
suffix- string suffix added after conversion to JSON string. Defaults to no suffix. -
escape- callsHoek.jsonEscape()after conversion to JSON string. Defaults tofalse.
Default value: { collect: false }.
Request logging options:
collect- iftrue, request-level logs (both internal and application) are collected and accessible viarequest.logs.
Default value: none.
Route notes used for generating documentation (string or array of strings).
This setting is not available when setting server route defaults using
server.options.routes.
Determines how the request payload is processed.
Default value: allows parsing of the following mime types:
- application/json
- application/*+json
- application/octet-stream
- application/x-www-form-urlencoded
- multipart/form-data
- text/*
A string or an array of strings with the allowed mime types for the endpoint. Use this settings to
limit the set of allowed mime types. Note that allowing additional mime types not listed above will
not enable them to be parsed, and if parse is true, the request
will result in an error response.
Default value: none.
An object where each key is a content-encoding name and each value is an object with the desired
decoder settings. Note that encoder settings are set in compression.
Default value: 'application/json'.
The default content type if the 'Content-Type' request header is missing.
Default value: 'error' (return a Bad Request (400) error response).
A failAction value which determines how to handle payload parsing
errors.
Default value: 1048576 (1MB).
Limits the size of incoming payloads to the specified byte count. Allowing very large payloads may cause the server to run out of memory.
Default value: 1000.
Limits the number of parts allowed in multipart payloads.
Default value: false.
Overrides payload processing for multipart requests. Value can be one of:
-
false- disable multipart processing (this is the default value). -
true- enable multipart processing using theoutputvalue. -
an object with the following required options:
output- same as theoutputoption with an additional value option:-
annotated- wraps each multipart part in an object with the following keys:headers- the part headers.filename- the part file name.payload- the processed part payload.
-
Default value: 'data'.
The processed payload format. The value must be one of:
-
'data'- the incoming payload is read fully into memory. Ifparseistrue, the payload is parsed (JSON, form-decoded, multipart) based on the 'Content-Type' header. Ifparseisfalse, a rawBufferis returned. -
'stream'- the incoming payload is made available via aStream.Readableinterface. If the payload is 'multipart/form-data' andparseistrue, field values are presented as text while files are provided as streams. File streams from a 'multipart/form-data' upload will also have ahapiproperty containing thefilenameandheadersproperties. Note that payload streams for multipart payloads are a synthetic interface created on top of the entire multipart content loaded into memory. To avoid loading large multipart payloads into memory, setparsetofalseand handle the multipart payload in the handler using a streaming parser (e.g. pez). -
'file'- the incoming payload is written to temporary file in the directory specified by theuploadssettings. If the payload is 'multipart/form-data' andparseistrue, field values are presented as text while files are saved to disk. Note that it is the sole responsibility of the application to clean up the files generated by the framework. This can be done by keeping track of which files are used (e.g. using therequest.appobject), and listening to the server'response'event to perform cleanup.
Default value: none.
A mime type string overriding the 'Content-Type' header value received.
Default value: true.
Determines if the incoming payload is processed or presented raw. Available values:
-
true- if the request 'Content-Type' matches the allowed mime types set byallow(for the whole payload as well as parts), the payload is converted into an object when possible. If the format is unknown, a Bad Request (400) error response is sent. Any known content encoding is decoded. -
false- the raw payload is returned unmodified. -
'gunzip'- the raw payload is returned unmodified after any known content encoding is decoded.
Default value: 'error'.
Sets handling of incoming payload that may contain a prototype poisoning security attack. Available values:
-
'error'- returns a400bad request error when the payload contains a prototype. -
'remove'- sanitizes the payload to remove the prototype. -
'ignore'- disables the protection and allows the payload to pass as received. Use this option only when you are sure that such incoming data cannot pose any risks to your application.
Default value: to 10000 (10 seconds).
Payload reception timeout in milliseconds. Sets the maximum time allowed for the client to transmit the request payload (body) before giving up and responding with a Request Timeout (408) error response.
Set to false to disable.
Default value: os.tmpdir().
The directory used for writing file uploads.
Default value: {}.
Plugin-specific configuration. plugins is an object where each key is a plugin name and the value
is the plugin configuration.
Default value: none.
The pre option allows defining methods for performing actions before the handler is called. These
methods allow breaking the handler logic into smaller, reusable components that can be shared
across routes, as well as provide a cleaner error handling of prerequisite operations (e.g. load
required reference data from a database).
pre is assigned an ordered array of methods which are called serially in order. If the pre
array contains another array of methods as one of its elements, those methods are called in
parallel. Note that during parallel execution, if any of the methods error, return a
takeover response, or abort signal, the other parallel methods will continue
to execute but will be ignored once completed.
pre can be assigned a mixed array of:
-
an array containing the elements listed below, which are executed in parallel.
-
an object with:
method- a lifecycle method.assign- key name used to assign the response of the method to inrequest.preandrequest.preResponses.failAction- AfailActionvalue which determine what to do when a pre-handler method throws an error. Ifassignis specified and thefailActionsetting is not'error', the error will be assigned.
-
a method function - same as including an object with a single
methodkey.
Note that pre-handler methods do not behave the same way other lifecycle methods
do when a value is returned. Instead of the return value becoming the new response payload, the
value is used to assign the corresponding request.pre and
request.preResponses properties. Otherwise, the handling of errors,
takeover response response, or abort signal behave the same as any other
lifecycle methods.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const pre1 = function (request, h) {
return 'Hello';
};
const pre2 = function (request, h) {
return 'World';
};
const pre3 = function (request, h) {
return request.pre.m1 + ' ' + request.pre.m2;
};
server.route({
method: 'GET',
path: '/',
options: {
pre: [
[
// m1 and m2 executed in parallel
{ method: pre1, assign: 'm1' },
{ method: pre2, assign: 'm2' }
],
{ method: pre3, assign: 'm3' },
],
handler: function (request, h) {
return request.pre.m3 + '!\n';
}
}
});Processing rules for the outgoing response.
Default value: 499.
The default HTTP status code used to set a response error when the request is closed or aborted
before the response is fully transmitted. Value can be any integer greater or equal to 400. The
default value 499 is based on the non-standard nginx "CLIENT CLOSED REQUEST" error. The value is
only used for logging as the request has already ended.
Default value: 204.
The default HTTP status code when the payload is considered empty. Value can be 200 or 204.
Note that a 200 status code is converted to a 204 only at the time of response transmission
(the response status code will remain 200 throughout the request lifecycle unless manually set).
Default value: 'error' (return an Internal Server Error (500) error response).
A failAction value which defines what to do when a response fails
payload validation.
Default value: false.
If true, applies the validation rule changes to the response payload.
Default value: none.
joi options object pass to the validation function. Useful to set global options such as stripUnknown or abortEarly. If a custom validation function is defined via schema or status then options can an arbitrary object that will be passed to this function as the second argument.
Default value: true.
If false, payload range support is disabled.
Default value: 100 (all responses).
The percent of response payloads validated (0 - 100). Set to 0 to disable all validation.
Default value: true (no validation).
The default response payload validation rules (for all non-error responses) expressed as one of:
-
true- any payload allowed (no validation). -
false- no payload allowed. -
a joi validation object. The
optionsalong with the request context ({ headers, params, query, payload, state, app, auth }) are passed to the validation function. -
a validation function using the signature
async function(value, options)where:-
value- the pending response payload. -
options- Theoptionsalong with the request context ({ headers, params, query, payload, state, app, auth }). -
if the function returns a value and
modifyistrue, the value is used as the new response. If the original response is an error, the return value is used to override the original erroroutput.payload. If an error is thrown, the error is processed according tofailAction.
-
Default value: none.
Validation schemas for specific HTTP status codes. Responses (excluding errors) not matching the
listed status codes are validated using the default schema.
status is set to an object where each key is a 3 digit HTTP status code and the value has the
same definition as schema.
Default value: none.
A custom rules object passed to each rules processor registered with server.rules().
Default value: false (security headers disabled).
Sets common security headers. To enable, set security to true or to an object with the
following options:
-
hsts- controls the 'Strict-Transport-Security' header, where:-
true- the header will be set tomax-age=15768000. This is the default value. -
a number - the maxAge parameter will be set to the provided value.
-
an object with the following fields:
maxAge- the max-age portion of the header, as a number. Default is15768000.includeSubDomains- a boolean specifying whether to add theincludeSubDomainsflag to the header.preload- a boolean specifying whether to add the'preload'flag (used to submit domains inclusion in Chrome's HTTP Strict Transport Security (HSTS) preload list) to the header.
-
-
xframe- controls the 'X-Frame-Options' header, where:-
true- the header will be set to'DENY'. This is the default value. -
'deny'- the headers will be set to'DENY'. -
'sameorigin'- the headers will be set to'SAMEORIGIN'. -
an object for specifying the 'allow-from' rule, where:
rule- one of:'deny''sameorigin''allow-from'
source- whenruleis'allow-from'this is used to form the rest of the header, otherwise this field is ignored. Ifruleis'allow-from'butsourceis unset, the rule will be automatically changed to'sameorigin'.
-
-
xss- controls the 'X-XSS-Protection' header, where:'disabled'- the header will be set to'0'. This is the default value.'enabled'- the header will be set to'1; mode=block'.false- the header will be omitted.
Note: when enabled, this setting can create a security vulnerabilities in versions of Internet Explorer below 8, unpatched versions of IE8, and browsers that employ an XSS filter/auditor. See here, here, and here for more information.
-
noOpen- boolean controlling the 'X-Download-Options' header for Internet Explorer, preventing downloads from executing in your context. Defaults totruesetting the header to'noopen'. -
noSniff- boolean controlling the 'X-Content-Type-Options' header. Defaults totruesetting the header to its only and default option,'nosniff'. -
referrer- controls the 'Referrer-Policy' header, which has the following possible values.false- the 'Referrer-Policy' header will not be sent to clients with responses. This is the default value.''- instructs clients that the Referrer-Policy will be defined elsewhere, such as in a meta html tag.'no-referrer'- instructs clients to never include the referrer header when making requests.'no-referrer-when-downgrade'- instructs clients to never include the referrer when navigating from HTTPS to HTTP.'same-origin'- instructs clients to only include the referrer on the current site origin.'origin'- instructs clients to include the referrer but strip off path information so that the value is the current origin only.'strict-origin'- same as'origin'but instructs clients to omit the referrer header when going from HTTPS to HTTP.'origin-when-cross-origin'- instructs clients to include the full path in the referrer header for same-origin requests but only the origin components of the URL are included for cross origin requests.'strict-origin-when-cross-origin'- same as'origin-when-cross-origin'but the client is instructed to omit the referrer when going from HTTPS to HTTP.'unsafe-url'- instructs the client to always include the referrer with the full URL.
Default value: { parse: true, failAction: 'error' }.
HTTP state management (cookies) allows the server to store information on the client which is sent
back to the server with every request (as defined in RFC 6265).
state supports the following options:
-
parse- determines if incoming 'Cookie' headers are parsed and stored in therequest.stateobject. -
failAction- AfailActionvalue which determines how to handle cookie parsing errors. Defaults to'error'(return a Bad Request (400) error response).
Default value: none.
Route tags used for generating documentation (array of strings).
This setting is not available when setting server route defaults using
server.options.routes.
Default value: { server: false }.
Timeouts for processing durations.
Default value: false.
Response timeout in milliseconds. Sets the maximum time allowed for the server to respond to an incoming request before giving up and responding with a Service Unavailable (503) error response.
Default value: none (use node default of 2 minutes).
By default, node sockets automatically timeout after 2 minutes. Use this option to override this
behavior. Set to false to disable socket timeouts.
Default value: { headers: true, params: true, query: true, payload: true, state: true, failAction: 'error' }.
Request input validation rules for various request components.
Default value: none.
An optional object with error fields copied into every validation error response.
Default value: 'error' (return a Bad Request (400) error response).
A failAction value which determines how to handle failed validations.
When set to a function, the err argument includes the type of validation error under
err.output.payload.validation.source. The default error that would otherwise have been logged
or returned can be accessed under err.data.defaultError.
Default value: true (no validation).
Validation rules for incoming request headers:
-
true- any headers allowed (no validation performed). -
a joi validation object.
-
a validation function using the signature
async function(value, options)where:value- therequest.headersobject containing the request headers.options-options.- if a value is returned, the value is used as the new
request.headersvalue and the original value is stored inrequest.orig.headers. Otherwise, the headers are left unchanged. If an error is thrown, the error is handled according tofailAction.
Note that all header field names must be in lowercase to match the headers normalized by node.
Default value: none.
An options object passed to the joi rules or the custom
validation methods. Used for setting global options such as stripUnknown or abortEarly.
If a custom validation function (see headers, params, query, or payload above) is defined
then options can an arbitrary object that will be passed to this function as the second
parameter.
The values of the other inputs (i.e. headers, query, params, payload, state, app, and auth)
are added to the options object under the validation context (accessible in rules as
Joi.ref('$query.key')).
Note that validation is performed in order (i.e. headers, params, query, and payload) and if type casting is used (e.g. converting a string to a number), the value of inputs not yet validated will reflect the raw, unvalidated and unmodified values.
If the validation rules for headers, params, query, and payload are defined at both the
server routes level and at the route level, the individual route
settings override the routes defaults (the rules are not merged).
Default value: true (no validation).
Validation rules for incoming request path parameters, after matching the path against the route,
extracting any parameters, and storing them in request.params, where:
-
true- any path parameter value allowed (no validation performed). -
a joi validation object.
-
a validation function using the signature
async function(value, options)where:value- therequest.paramsobject containing the request path parameters.options-options.- if a value is returned, the value is used as the new
request.paramsvalue and the original value is stored inrequest.orig.params. Otherwise, the path parameters are left unchanged. If an error is thrown, the error is handled according tofailAction.
Note that failing to match the validation rules to the route path parameters definition will cause all requests to fail.
Default value: true (no validation).
Validation rules for incoming request payload (request body), where:
-
true- any payload allowed (no validation performed). -
false- no payload allowed. -
a joi validation object.
- Note that empty payloads are represented by a
nullvalue. If a validation schema is provided and empty payload are allowed, the schema must be explicitly defined by setting the rule to a joi schema withnullallowed (e.g.Joi.object({ /* keys here */ }).allow(null)).
- Note that empty payloads are represented by a
-
a validation function using the signature
async function(value, options)where:value- therequest.payloadobject containing the request payload.options-options.- if a value is returned, the value is used as the new
request.payloadvalue and the original value is stored inrequest.orig.payload. Otherwise, the payload is left unchanged. If an error is thrown, the error is handled according tofailAction.
Note that validating large payloads and modifying them will cause memory duplication of the payload (since the original is kept), as well as the significant performance cost of validating large amounts of data.
Default value: true (no validation).
Validation rules for incoming request URI query component (the key-value part of the URI between
'?' and '#'). The query is parsed into its individual key-value pairs, decoded, and stored in
request.query prior to validation. Where:
-
true- any query parameter value allowed (no validation performed). -
false- no query parameter value allowed. -
a joi validation object.
-
a validation function using the signature
async function(value, options)where:value- therequest.queryobject containing the request query parameters.options-options.- if a value is returned, the value is used as the new
request.queryvalue and the original value is stored inrequest.orig.query. Otherwise, the query parameters are left unchanged. If an error is thrown, the error is handled according tofailAction.
Note that changes to the query parameters will not be reflected in request.url.
Default value: true (no validation).
Validation rules for incoming cookies. The cookie header is parsed and decoded into the
request.state prior to validation. Where:
-
true- any cookie value allowed (no validation performed). -
false- no cookies allowed. -
a joi validation object.
-
a validation function using the signature
async function(value, options)where:value- therequest.stateobject containing all parsed cookie values.options-options.- if a value is returned, the value is used as the new
request.statevalue and the original value is stored inrequest.orig.state. Otherwise, the cookie values are left unchanged. If an error is thrown, the error is handled according tofailAction.
Default value: null (no default validator).
Sets a server validation module used to compile raw validation rules into validation schemas (e.g. joi).
Note: the validator is only used when validation rules are not pre-compiled schemas. When a validation rules is a function or schema object, the rule is used as-is and the validator is not used.
Each incoming request passes through the request lifecycle. The specific steps vary based on the server and route configurations, but the order in which the applicable steps are executed is always the same. The following is the complete list of steps a request can go through:
-
onRequest
- always called when
onRequestextensions exist. - the request path and method can be modified via the
request.setUrl()andrequest.setMethod()methods. Changes to the request path or method will impact how the request is routed and can be used for rewrite rules. request.payloadisundefinedand can be overridden with any non-undefinedvalue to bypass payload processing.request.routeis unassigned.request.urlcan benullif the incoming request path is invalid.request.pathcan be an invalid path.
- always called when
-
Route lookup
- lookup based on
request.pathandrequest.method. - skips to onPreResponse if no route is found or if the path violates the HTTP specification.
- lookup based on
-
Cookies processing
- based on the route
stateoption. - error handling based on
failAction.
- based on the route
-
onPreAuth
- called regardless if authentication is performed.
-
Authentication
- based on the route
authoption.
- based on the route
-
Payload processing
- based on the route
payloadoption and ifrequest.payloadhas not been overridden in onRequest. - error handling based on
failAction.
- based on the route
-
Payload authentication
- based on the route
authoption.
- based on the route
-
onCredentials
- called only if authentication is performed.
-
Authorization
- based on the route authentication
accessoption.
- based on the route authentication
-
onPostAuth
- called regardless if authentication is performed.
-
Headers validation
- based on the route
validate.headersoption. - error handling based on
failAction.
- based on the route
-
Path parameters validation
- based on the route
validate.paramsoption. - error handling based on
failAction.
- based on the route
-
Query validation
- based on the route
validate.queryoption. - error handling based on
failAction.
- based on the route
-
Payload validation
- based on the route
validate.payloadoption. - error handling based on
failAction.
- based on the route
-
State validation
- based on the route
validate.stateoption. - error handling based on
failAction.
- based on the route
-
onPreHandler
-
Pre-handler methods
- based on the route
preoption. - error handling based on each pre-handler method's
failActionsetting.
- based on the route
-
Route handler
- executes the route
handler.
- executes the route
-
onPostHandler
- the response contained in
request.responsemay be modified (but not assigned a new value). To return a different response type (for example, replace an error with an HTML response), return a new response value.
- the response contained in
-
Response validation
- error handling based on
failAction.
- error handling based on
-
onPreResponse
- always called, unless the request is aborted.
- the response contained in
request.responsemay be modified (but not assigned a new value). To return a different response type (for example, replace an error with an HTML response), return a new response value. Note that any errors generated will not be passed back to onPreResponse to prevent an infinite loop.
-
Response transmission
- may emit a
'request'event on the'error'channel.
- may emit a
-
Finalize request
- emits
'response'event.
- emits
-
onPostResponse
- return value is ignored since the response is already set.
- emits a
'request'event on the'error'channel if an error is returned. - all extension handlers are executed even if some error.
- note that since the handlers are executed in serial (each is
awaited), care must be taken to avoid blocking execution if other extension handlers expect to be called immediately when the response is sent. If an onPostResponse handler is performing IO, it should defer that activity to another tick and return immediately (either without a return value or without a promise that is solve to resolve).
Lifecycle methods are the interface between the framework and the application. Many of the request
lifecycle steps: extensions, authentication,
handlers, pre-handler methods, and
failAction function values are lifecyle methods provided by the
developer and executed by the framework.
Each lifecycle method is a function with the signature await function(request, h, [err]) where:
request- the request object.h- the response toolkit the handler must call to set a response and return control back to the framework.err- an error object available only when the method is used as afailActionvalue.
Each lifecycle method must return a value or a promise that resolves into a value. If a lifecycle
method returns without a value or resolves to an undefined value, an Internal Server Error (500)
error response is sent.
The return value must be one of:
- Plain value:
null- string
- number
- boolean
BufferobjectErrorobject- plain
Error. - a
Boomobject.
- plain
Streamobject- must be compatible with the "streams2" API and not be in
objectMode. - if the stream object has a
statusCodeproperty, that status code will be used as the default response code based on thepassThroughoption. - if the stream object has a
headersproperty, the headers will be included in the response based on thepassThroughoption. - if the stream object has a function property
setCompressor(compressor)and the response passes through a compressor, a reference to the compressor stream will be passed to the response stream via this method.
- must be compatible with the "streams2" API and not be in
- any object or array
- must not include circular references.
- a toolkit signal:
h.abandon- abort processing the request.h.close- abort processing the request and callend()to ensure the response is closed.h.continue- continue processing the request lifecycle without changing the response.
- a toolkit method response:
h.response()- wraps a plain response in a response object.h.redirect()- wraps a plain response with a redirection directive.h.authenticated()- indicate request authenticated successfully (auth scheme only).h.unauthenticated()- indicate request failed to authenticate (auth scheme only).
- a promise object that resolve to any of the above values
Any error thrown by a lifecycle method will be used as the response object. While errors and valid values can be returned, it is recommended to throw errors. Throwing non-error values will generate a Bad Implementation (500) error response.
const handler = function (request, h) {
if (request.query.forbidden) {
throw Boom.badRequest();
}
return 'success';
};If the route has a bind option or server.bind() was
called, the lifecycle method will be bound to the provided context via this as well as accessible
via h.context.
The flow between each lifecycle step depends on the value returned by each lifecycle method as follows:
-
an error:
- the lifecycle skips to the Response validation step.
- if returned by the onRequest step it skips to the onPreResponse step.
- if returned by the Response validation step it skips to the onPreResponse step.
- if returned by the onPreResponse step it skips to the Response transmission step.
-
an abort signal (
h.abandonorh.close):- skips to the Finalize request step.
-
a
h.continuesignal:- continues processing the request lifecycle without changing the request response.
- cannot be used by the
authenticate()scheme method.
-
- overrides the request response with the provided value and skips to the Response validation step.
- if returned by the Response validation step it skips to the onPreResponse step.
- if returned by the onPreResponse step it skips to the Response transmission step.
-
any other response:
- overrides the request response with the provided value and continues processing the request lifecycle.
- cannot be returned from any step prior to the Pre-handler methods step.
The authenticate() method has access to two additional return values:
- h.authenticated() - indicate request authenticated successfully.
- h.unauthenticated() - indicate request failed to authenticate.
Note that these rules apply somewhat differently when used in a pre-handler method.
A takeover response is a response object on which response.takeover()
was called to signal that the lifecycle method return value should be set as
the response and skip to immediately validate and trasmit the value, bypassing other lifecycle
steps.
Various configuration options allows defining how errors are handled. For example, when invalid
payload is received or malformed cookie, instead of returning an error, the framework can be
configured to perform another action. When supported the failAction option supports the following
values:
-
'error'- return the error object as the response. -
'log'- report the error but continue processing the request. -
'ignore'- take no action and continue processing the request. -
a lifecycle method with the signature
async function(request, h, err)where:request- the request object.h- the response toolkit.err- the error object.
hapi uses the boom error library for all its internal
error generation. boom provides an expressive interface to return HTTP errors. Any error
thrown by a lifecycle method is converted into a boom object and defaults to status
code 500 if the error is not already a boom object.
When the error is sent back to the client, the response contains a JSON object with the
statusCode, error, and message keys.
const Hapi = require('@hapi/hapi');
const Boom = require('@hapi/boom');
const server = Hapi.server();
server.route({
method: 'GET',
path: '/badRequest',
handler: function (request, h) {
throw Boom.badRequest('Unsupported parameter'); // 400
}
});
server.route({
method: 'GET',
path: '/internal',
handler: function (request, h) {
throw new Error('unexpect error'); // 500
}
});Errors can be customized by changing their output content. The boom error object includes the
following properties:
-
isBoom- iftrue, indicates this is aBoomobject instance. -
message- the error message. -
output- the formatted response. Can be directly manipulated after object construction to return a custom error response. Allowed root keys:-
statusCode- the HTTP status code (typically 4xx or 5xx). -
headers- an object containing any HTTP headers where each key is a header name and value is the header content. -
payload- the formatted object used as the response payload. Can be directly manipulated but any changes will be lost ifreformat()is called. Any content allowed and by default includes the following content:-
statusCode- the HTTP status code, derived fromerror.output.statusCode. -
error- the HTTP status message (e.g. 'Bad Request', 'Internal Server Error') derived fromstatusCode. -
message- the error message derived fromerror.message.
-
-
-
inherited
Errorproperties.
It also supports the following method:
reformat()- rebuildserror.outputusing the other object properties.
const Boom = require('@hapi/boom');
const handler = function (request, h) {
const error = Boom.badRequest('Cannot feed after midnight');
error.output.statusCode = 499; // Assign a custom error code
error.reformat();
error.output.payload.custom = 'abc_123'; // Add custom key
throw error;
});When a different error representation is desired, such as an HTML page or a different payload
format, the 'onPreResponse' extension point may be used to identify errors and replace them with
a different response object, as in this example using Vision's
.view() response toolkit property.
const Hapi = require('@hapi/hapi');
const Vision = require('@hapi/vision');
const server = Hapi.server({ port: 80 });
server.register(Vision, (err) => {
server.views({
engines: {
html: require('handlebars')
}
});
});
const preResponse = function (request, h) {
const response = request.response;
if (!response.isBoom) {
return h.continue;
}
// Replace error with friendly HTML
const error = response;
const ctx = {
message: (error.output.statusCode === 404 ? 'page not found' : 'something went wrong')
};
return h.view('error', ctx).code(error.output.statusCode);
};
server.ext('onPreResponse', preResponse);Access: read only.
The response toolkit is a collection of properties and utilities passed to every
lifecycle method. It is somewhat hard to define as it provides both
utilities for manipulating responses as well as other information. Since the toolkit is passed
as a function argument, developers can name it whatever they want. For the purpose of this document
the h notation is used. It is named in the spirit of the RethinkDB r method, with h for
hapi.
Access: read only.
A response symbol. When returned by a lifecycle method, the request lifecycle skips to the
finalizing step without further interaction with the node response stream. It is the developer's
responsibility to write and end the response directly via request.raw.res.
Access: read only.
A response symbol. When returned by a lifecycle method, the request lifecycle skips to the
finalizing step after calling request.raw.res.end()) to close the node response stream.
Access: read / write (will impact the shared context if the object is modified).
A response symbol. Provides access to the route or server context set via the route
bind option or server.bind().
Access: read only.
A response symbol. When returned by a lifecycle method, the request lifecycle continues without changing the response.
Access: read only.
The server realm associated with the matching route. Defaults to the root server realm in the onRequest step.
Access: read only and public request interface.
The [request] object. This is a duplication of the request lifecycle method argument used by
toolkit decorations to access the current request.
Used by the [authentication] method to pass back valid credentials where:
-
data- an object with:credentials- (required) object representing the authenticated entity.artifacts- (optional) authentication artifacts object specific to the authentication scheme.
Return value: an internal authentication object.
Sets the response 'ETag' and 'Last-Modified' headers and checks for any conditional request headers
to decide if the response is going to qualify for an HTTP 304 (Not Modified). If the entity values
match the request conditions, h.entity() returns a response object for the lifecycle method to
return as its value which will set a 304 response. Otherwise, it sets the provided entity headers
and returns undefined. The method arguments are:
options- a required configuration object with:etag- the ETag string. Required ifmodifiedis not present. Defaults to no header.modified- the Last-Modified header value. Required ifetagis not present. Defaults to no header.vary- same as theresponse.etag()option. Defaults totrue.
Return value:
- a response object if the response is unmodified.
- undefined if the response has changed.
If undefined is returned, the developer must return a valid lifecycle method value. If a response
is returned, it should be used as the return value (but may be customize using the response
methods).
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.route({
method: 'GET',
path: '/',
options: {
cache: { expiresIn: 5000 },
handler: function (request, h) {
const response = h.entity({ etag: 'abc' });
if (response) {
response.header('X', 'y');
return response;
}
return 'ok';
}
}
});Redirects the client to the specified uri. Same as calling h.response().redirect(uri).
Returns a response object.
const handler = function (request, h) {
return h.redirect('http://example.com');
};Wraps the provided value and returns a response object which allows
customizing the response (e.g. setting the HTTP status code, custom headers, etc.), where:
value- (optional) return value. Defaults tonull.
Returns a response object.
// Detailed notation
const handler = function (request, h) {
const response = h.response('success');
response.type('text/plain');
response.header('X-Custom', 'some-value');
return response;
};
// Chained notation
const handler = function (request, h) {
return h.response('success')
.type('text/plain')
.header('X-Custom', 'some-value');
};Sets a response cookie using the same arguments as response.state().
Return value: none.
const ext = function (request, h) {
h.state('cookie-name', 'value');
return h.continue;
};Used by the [authentication] method to indicate authentication failed and pass back the credentials received where:
error- (required) the authentication error.data- (optional) an object with:credentials- (required) object representing the authenticated entity.artifacts- (optional) authentication artifacts object specific to the authentication scheme.
The method is used to pass both the authentication error and the credentials. For example, if a
request included expired credentials, it allows the method to pass back the user information
(combined with a 'try' authentication mode) for error customization.
There is no difference between throwing the error or passing it with the h.unauthenticated()
method if no credentials are passed, but it might still be helpful for code clarity.
Clears a response cookie using the same arguments as response.unstate().
const ext = function (request, h) {
h.unstate('cookie-name');
return h.continue;
};The response object contains the request response value along with various HTTP headers and flags.
When a lifecycle method returns a value, the value is wrapped in a response
object along with some default flags (e.g. 200 status code). In order to customize a response
before it is returned, the h.response() method is provided.
Access: read / write.
Default value: {}.
Application-specific state. Provides a safe place to store application data without potential
conflicts with the framework. Should not be used by plugins which should use
plugins[name].
Access: read.
Default value: none.
Provides a preview of the response HTTP Content-Type header based on the implicit response type, any explicit Content-Type header set, and any content character-set defined. The returned value is only a preview as the content type can change later both internally and by user code (it represents current response state). The value is null if no implicit type can be determined.
Access: read only and the public podium interface.
The response.events object supports the following events:
-
'peek'- emitted for each chunk of data written back to the client connection. The event method signature isfunction(chunk, encoding). -
'finish'- emitted when the response finished writing but before the client response connection is ended. The event method signature isfunction ().
const Crypto = require('crypto');
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const preResponse = function (request, h) {
const response = request.response;
if (response.isBoom) {
return null;
}
const hash = Crypto.createHash('sha1');
response.events.on('peek', (chunk) => {
hash.update(chunk);
});
response.events.once('finish', () => {
console.log(hash.digest('hex'));
});
return h.continue;
};
server.ext('onPreResponse', preResponse);Access: read only.
Default value: {}.
An object containing the response headers where each key is a header field name and the value is the string header value or array of string.
Note that this is an incomplete list of headers to be included with the response. Additional headers will be added once the response is prepared for transmission.
Access: read / write.
Default value: {}.
Plugin-specific state. Provides a place to store and pass request-level plugin data. plugins is
an object where each key is a plugin name and the value is the state.
Access: read only.
Object containing the response handling flags.
Access: read only.
Defaults value: true.
If true and source is a Stream, copies the statusCode and headers
properties of the stream object to the outbound response.
Access: read only.
Default value: null (use route defaults).
Override the route json options used when source
value requires stringification.
Access: read only.
Default value: null (use route defaults).
If set, overrides the route cache with an expiration value in
milliseconds.
Default value: false.
If true, a suffix will be automatically added to the 'ETag' header at transmission time
(separated by a '-' character) when the HTTP 'Vary' header is present.
Access: read only.
The raw value returned by the lifecycle method.
Access: read only.
Default value: 200.
The HTTP response status code.
Access: read only.
A string indicating the type of source with available values:
'plain'- a plain response such as string, number,null, or simple object.'buffer'- aBuffer.'stream'- aStream.
Sets the HTTP 'Content-Length' header (to avoid chunked transfer encoding) where:
length- the header value. Must match the actual payload size.
Return value: the current response object.
Sets the 'Content-Type' HTTP header 'charset' property where:
charset- the charset property value. Whencharsetvalue is falsy, it will prevent hapi from using its default charset setting.
Return value: the current response object.
Sets the HTTP status code where:
statusCode- the HTTP status code (e.g. 200).
Return value: the current response object.
Sets the HTTP status message where:
httpMessage- the HTTP status message (e.g. 'Ok' for status code 200).
Return value: the current response object.
Sets the HTTP 'content-encoding' header where:
encoding- the header value string.
Return value: the current response object.
Note that setting content encoding via this method does not set a 'vary' HTTP header with 'accept-encoding' value. To vary the response, use the response.header() method instead.
Sets the HTTP status code to Created (201) and the HTTP 'Location' header where:
uri- an absolute or relative URI used as the 'Location' header value.
Return value: the current response object.
Sets the string encoding scheme used to serial data into the HTTP payload where:
encoding- the encoding property value (see node Buffer encoding).
Return value: the current response object.
Sets the representation entity tag where:
-
tag- the entity tag string without the double-quote. -
options- (optional) settings where:-
weak- iftrue, the tag will be prefixed with the'W/'weak signifier. Weak tags will fail to match identical tags for the purpose of determining 304 response status. Defaults tofalse. -
vary- iftrueand content encoding is set or applied to the response (e.g 'gzip' or 'deflate'), the encoding name will be automatically added to the tag at transmission time (separated by a'-'character). Ignored whenweakistrue. Defaults totrue.
-
Return value: the current response object.
Sets an HTTP header where:
-
name- the header name. -
value- the header value. -
options- (optional) object where:-
append- iftrue, the value is appended to any existing header value usingseparator. Defaults tofalse. -
separator- string used as separator when appending to an existing value. Defaults to','. -
override- iffalse, the header value is not set if an existing value present. Defaults totrue. -
duplicate- iffalse, the header value is not modified if the provided value is already included. Does not apply whenappendisfalseor if thenameis'set-cookie'. Defaults totrue.
-
Return value: the current response object.
Sets the HTTP 'Location' header where:
uri- an absolute or relative URI used as the 'Location' header value.
Return value: the current response object.
Sets an HTTP redirection response (302) and decorates the response with additional methods, where:
uri- an absolute or relative URI used to redirect the client to another resource.
Return value: the current response object.
Decorates the response object with the response.temporary(),
response.permanent(), and response.rewritable()
methods to easily change the default redirection code (302).
| Permanent | Temporary | |
|---|---|---|
| Rewritable | 301 | 302 |
| Non-rewritable | 308 | 307 |
Sets the JSON.stringify() replacer argument where:
method- the replacer function or array. Defaults to none.
Return value: the current response object.
Sets the JSON.stringify() space argument where:
count- the number of spaces to indent nested object keys. Defaults to no indentation.
Return value: the current response object.
Sets an HTTP cookie where:
-
name- the cookie name. -
value- the cookie value. If nooptions.encodingis defined, must be a string. Seeserver.state()for supportedencodingvalues. -
options- (optional) configuration. If the state was previously registered with the server usingserver.state(), the specified keys inoptionsare merged with the default server definition.
Return value: the current response object.
Sets a string suffix when the response is process via JSON.stringify() where:
suffix- the string suffix.
Return value: the current response object.
Overrides the default route cache expiration rule for this response instance where:
msec- the time-to-live value in milliseconds.
Return value: the current response object.
Sets the HTTP 'Content-Type' header where:
mimeType- is the mime type.
Return value: the current response object.
Should only be used to override the built-in default for each response type.
Clears the HTTP cookie by setting an expired value where:
name- the cookie name.options- (optional) configuration for expiring cookie. If the state was previously registered with the server usingserver.state(), the specifiedoptionsare merged with the server definition.
Return value: the current response object.
Adds the provided header to the list of inputs affected the response generation via the HTTP 'Vary' header where:
header- the HTTP request header name.
Return value: the current response object.
Marks the response object as a takeover response.
Return value: the current response object.
Sets the status code to 302 or 307 (based on the response.rewritable()
setting) where:
isTemporary- iffalse, sets status to permanent. Defaults totrue.
Return value: the current response object.
Only available after calling the response.redirect() method.
Sets the status code to 301 or 308 (based on the response.rewritable()
setting) where:
isPermanent- iffalse, sets status to temporary. Defaults totrue.
Return value: the current response object.
Only available after calling the response.redirect() method.
Sets the status code to 301/302 for rewritable (allows changing the request method from 'POST'
to 'GET') or 307/308 for non-rewritable (does not allow changing the request method from 'POST'
to 'GET'). Exact code based on the response.temporary() or
response.permanent() setting. Arguments:
isRewritable- iffalse, sets to non-rewritable. Defaults totrue.
Return value: the current response object.
Only available after calling the response.redirect() method.
The request object is created internally for each incoming request. It is not the same object
received from the node HTTP server callback (which is available via request.raw.req).
The request properties change throughout the request lifecycle.
Access: read / write.
Application-specific state. Provides a safe place to store application data without potential
conflicts with the framework. Should not be used by plugins which should use
plugins[name].
Access: read only.
Authentication information:
-
artifacts- an artifact object received from the authentication strategy and used in authentication-related actions. -
credentials- thecredentialobject received during the authentication process. The presence of an object does not mean successful authentication. -
error- the authentication error if failed and mode set to'try'. -
isAuthenticated-trueif the request has been successfully authenticated, otherwisefalse. -
isAuthorized-trueis the request has been successfully authorized against the route authenticationaccessconfiguration. If the route has not access rules defined or if the request failed authorization, set tofalse. -
isInjected-trueif the request has been authenticated via theserver.inject()authoption, otherwiseundefined. -
mode- the route authentication mode. -
strategy- the name of the strategy used.
Access: read only and the public podium interface.
The request.events supports the following events:
-
'peek'- emitted for each chunk of payload data read from the client connection. The event method signature isfunction(chunk, encoding). -
'finish'- emitted when the request payload finished reading. The event method signature isfunction (). -
'disconnect'- emitted when a request errors or aborts unexpectedly.
const Crypto = require('crypto');
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const onRequest = function (request, h) {
const hash = Crypto.createHash('sha1');
request.events.on('peek', (chunk) => {
hash.update(chunk);
});
request.events.once('finish', () => {
console.log(hash.digest('hex'));
});
request.events.once('disconnect', () => {
console.error('request aborted');
});
return h.continue;
};
server.ext('onRequest', onRequest);Access: read only.
The raw request headers (references request.raw.req.headers).
Access: read only.
Request information:
-
acceptEncoding- the request preferred encoding. -
completed- request processing completion timestamp (0is still processing). -
cors- request CORS information (available only after the'onRequest'extension point as CORS is configured per-route and no routing decisions are made at that point in the request lifecycle), where:isOriginMatch-trueif the request 'Origin' header matches the configured CORS restrictions. Set tofalseif no 'Origin' header is found or if it does not match.
-
host- content of the HTTP 'Host' header (e.g. 'example.com:8080'). -
hostname- the hostname part of the 'Host' header (e.g. 'example.com'). -
id- a unique request identifier (using the format '{now}:{server.info.id}:{5 digits counter}'). -
received- request reception timestamp. -
referrer- content of the HTTP 'Referrer' (or 'Referer') header. -
remoteAddress- remote client IP address. -
remotePort- remote client port. -
responded- request response timestamp (0is not responded yet or response failed whencompletedis set).
Note that the request.info object is not meant to be modified.
Access: read only.
true if the request was created via server.inject(), and false otherwise.
Access: read only.
An array containing the logged request events.
Note that this array will be empty if route log.collect is set to false.
Access: read only.
The request method in lower case (e.g. 'get', 'post').
Access: read only.
The parsed content-type header. Only available when payload parsing enabled and no payload error occurred.
Access: read only.
An object containing the values of params, query, payload and state before any validation modifications made. Only set when input validation is performed.
Access: read only.
An object where each key is a path parameter name with matching value as described in Path parameters.
Access: read only.
An array containing all the path params values in the order they appeared in the path.
Access: read only.
The request URI's pathname component.
Access: read only / write in 'onRequest' extension method.
The request payload based on the route payload.output and payload.parse settings. Set to undefined in 'onRequest' extension methods and can be overridden to any non-undefined value to bypass payload processing.
Access: read / write.
Plugin-specific state. Provides a place to store and pass request-level plugin data. The plugins is an object where each key is a plugin name and the value is the state.
Access: read only.
An object where each key is the name assigned by a route pre-handler methods function. The values are the raw values provided to the continuation function as argument. For the wrapped response object, use responses.
Access: read / write (see limitations below).
The response object when set. The object can be modified but must not be assigned another object. To replace the response with another from within an extension point, return a new response value. Contains an error when a request terminates prematurely when the client disconnects.
Access: read only.
Same as pre but represented as the response object created by the pre method.
Access: read only.
An object where each key is a query parameter name and each matching value is the parameter value or an array of values if a parameter repeats. Can be modified indirectly via request.setUrl.
Access: read only.
An object containing the Node HTTP server objects. Direct interaction with these raw objects is not recommended.
req- the node request object.res- the node response object.
Access: read only.
The request route information object, where:
method- the route HTTP method.path- the route path.vhost- the route vhost option if configured.realm- the active realm associated with the route.settings- the route options object with all defaults applied.fingerprint- the route internal normalized string representing the normalized path.
Access: read only and the public server interface.
The server object.
Access: read only.
An object containing parsed HTTP state information (cookies) where each key is the cookie name and value is the matching cookie content after processing using any registered cookie definition.
Access: read only.
The parsed request URI.
Returns a response which you can pass to h.response() where:
source- the value to set as the source of h.response(), optional.options- optional object with the following optional properties:variety- a sting name of the response type (e.g.'file').prepare- a function with the signatureasync function(response)used to prepare the response after it is returned by a lifecycle method such as setting a file descriptor, where:response- the response object being prepared.- must return the prepared response object (
response). - may throw an error which is used as the prepared response.
marshal- a function with the signatureasync function(response)used to prepare the response for transmission to the client before it is sent, where:response- the response object being marshaled.- must return the prepared value (not as response object) which can be any value accepted by the
h.response()valueargument. - may throw an error which is used as the marshaled value.
close- a function with the signaturefunction(response)used to close the resources opened by the response object (e.g. file handlers), where:response- the response object being marshaled.- should not throw errors (which are logged but otherwise ignored).
Returns true when the request is active and processing should continue and false when the request terminated early or completed its lifecycle. Useful when request processing is a resource-intensive operation and should be terminated early if the request is no longer active (e.g. client disconnected or aborted early).
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
server.route({
method: 'POST',
path: '/worker',
handler: function (request, h) {
// Do some work...
// Check if request is still active
if (!request.active()) {
return h.close;
}
// Do some more work...
return null;
}
});Logs request-specific events. When called, the server emits a 'request' event
on the 'app' channel which can be used by other listeners or plugins. The arguments
are:
tags- a string or an array of strings (e.g.['error', 'database', 'read']) used to identify the event. Tags are used instead of log levels and provide a much more expressive mechanism for describing and filtering events.data- (optional) an message string or object with the application data being logged. Ifdatais a function, the function signature isfunction()and it called once to generate (return value) the actual data emitted to the listeners.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80, routes: { log: { collect: true } } });
server.events.on({ name: 'request', channels: 'app' }, (request, event, tags) => {
if (tags.error) {
console.log(event);
}
});
const handler = function (request, h) {
request.log(['test', 'error'], 'Test event');
return null;
};Note that any logs generated by the server internally will be emitted using the
'request' event on the 'internal' channel.
server.events.on({ name: 'request', channels: 'internal' }, (request, event, tags) => {
console.log(event);
});Validates a request against the route's authentication access
configuration, where:
request- the request object.
Return value: true if the request would have passed the route's access requirements.
Note that the route's authentication mode and strategies are ignored. The only match is made
between the request.auth.credentials scope and entity information and the route
access configuration.
If the route uses dynamic scopes, the scopes are constructed against the request.query,
request.params, request.payload, and
request.auth.credentials which may or may not match between the route and the
request's route. If this method is called using a request that has not been authenticated (yet or
not at all), it will return false if the route requires any authentication.
Changes the request method before the router begins processing the request where:
method- is the request HTTP method (e.g.'GET').
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const onRequest = function (request, h) {
// Change all requests to 'GET'
request.setMethod('GET');
return h.continue;
};
server.ext('onRequest', onRequest);Can only be called from an 'onRequest' extension method.
Changes the request URI before the router begins processing the request where:
url- the new request URI.urlcan be a string or an instance ofUrl.URLin which caseurl.hrefis used.stripTrailingSlash- iftrue, strip the trailing slash from the path. Defaults tofalse.
const Hapi = require('@hapi/hapi');
const server = Hapi.server({ port: 80 });
const onRequest = function (request, h) {
// Change all requests to '/test'
request.setUrl('/test');
return h.continue;
};
server.ext('onRequest', onRequest);Can only be called from an 'onRequest' extension method.
Plugins provide a way to organize application code by splitting the server logic into smaller components. Each plugin can manipulate the server through the standard server interface, but with the added ability to sandbox certain properties. For example, setting a file path in one plugin doesn't affect the file path set in another plugin.
A plugin is an object with the following properties:
-
register- (required) the registration function with the signatureasync function(server, options)where:server- the server object with a plugin-specificserver.realm.options- any options passed to the plugin during registration viaserver.register().
-
name- (required) the plugin name string. The name is used as a unique key. Published plugins (e.g. published in the npm registry) should use the same name as the name field in their 'package.json' file. Names must be unique within each application. -
version- (optional) plugin version string. The version is only used informatively to enable other plugins to find out the versions loaded. The version should be the same as the one specified in the plugin's 'package.json' file. -
multiple- (optional) iftrue, allows the plugin to be registered multiple times with the same server. Defaults tofalse. -
dependencies- (optional) a string or an array of strings indicating a plugin dependency. Same as setting dependencies viaserver.dependency(). -
requirements- (optional) object declaring the plugin supported semver range for:noderuntime semver range string.hapiframework semver range string.
-
once- (optional) iftrue, will only register the plugin once per server. If set, overrides theonceoption passed toserver.register(). Defaults to no override.
const plugin = {
name: 'test',
version: '1.0.0',
register: function (server, options) {
server.route({
method: 'GET',
path: '/test',
handler: function (request, h) {
return 'ok';
}
});
}
};Alternatively, the name and version can be included via the pkg property containing the
'package.json' file for the module which already has the name and version included:
const plugin = {
pkg: require('./package.json'),
register: function (server, options) {
server.route({
method: 'GET',
path: '/test',
handler: function (request, h) {
return 'ok';
}
});
}
};