You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I would like to be able to use Logic Analyzer to capture data from an i2c temperature sensor, and then decode the i2c traffic, and then put a decoder on to, so it knows the temperature. Finally I would like to see an analog trace that is filled with the temperature data, like in this mock up:
In an alternative scenario, I would like to send speed setpoints, and receive speed actual values to/from an variable frequency drive (VFD) via serial -> modbus -> inverter decoders, and plot those as an analog signal.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
I would like to be able to use Logic Analyzer to capture data from an i2c temperature sensor, and then decode the i2c traffic, and then put a decoder on to, so it knows the temperature. Finally I would like to see an analog trace that is filled with the temperature data, like in this mock up:
In an alternative scenario, I would like to send speed setpoints, and receive speed actual values to/from an variable frequency drive (VFD) via serial -> modbus -> inverter decoders, and plot those as an analog signal.
Is it feasible to add this to Logic Analyzer?
Beta Was this translation helpful? Give feedback.
All reactions