This example shows gNMI south-bound interface utilized with RESTCONF north-bound interface to manage gNMI devices on the network. Application works as standalone SDN controller. It is capable to connect to gNMI devices and expose connected devices over RESTCONF north-bound APIs. In this example the gNMI simulator is started as gNMI target and all operations are performed on this device.
The application, lighty.io gNMI/RESTCONF is pre-prepared with Openconfig YANG models. These models are used by both gNMI application and gNMI device simulator. Device has already preconfigured state/config data specified in initialJsonData.json JSON file. To communicate with gNMI device it is required to use TLS communication with certificates and username and password authorization.
This application starts:
- Lighty.io Controller with modules:
- lighty.io gNMI device simulator
In order to build and start and run this example, the lighty.io gNMI/RESTCONF application locally, you need:
- Java 11 or later
- Maven 3.5.4 or later
- Postman v7.36.5. or later
- Linux-based system with bash
This example shows how to start RCgNMI application and gNMI simulator app. Next step describes how to perform basic CRUD operations on the gNMI device using RCgNMI app. All RESTCONF requests used in this example are provided in [postman-collection](lighty.io gNMI-RESTCONF application.postman_collection.json).
Clone lighty repository and build it with maven. Then move to lighty-gnmi-community-restconf-app folder.
git clone [email protected]:PANTHEONtech/lighty.git
cd lighty
mvn clean install
cd lighty-examples/lighty-gnmi-community-restconf-app
Unzip lighty-rcgnmi-app to current location
unzip ../../lighty-applications/lighty-rcgnmi-app-aggregator/lighty-rcgnmi-app/target/lighty-rcgnmi-app-15.1.1-SNAPSHOT-bin.zip
Start application with pre-prepared configuration example_config.json.
java -jar lighty-rcgnmi-app-15.1.1-SNAPSHOT/lighty-rcgnmi-app-15.1.1-SNAPSHOT.jar -c example_config.json
Unzip gNMI simulator app to current folder.
unzip ../../lighty-modules/lighty-gnmi/lighty-gnmi-device-simulator/target/lighty-gnmi-device-simulator-15.1.1-SNAPSHOT-bin.zip
Start the application with pre-prepared configuration simulator_config.json
java -jar lighty-gnmi-device-simulator-15.1.1-SNAPSHOT/lighty-gnmi-device-simulator-15.1.1-SNAPSHOT.jar -c simulator/simulator_config.json
Certificates used in this example can be found here. Only the client certificates are added
to keystore with RPC. This RPC stores certificates in configuration data-store and encrypt their private key and passphrase.
Adding required certificates for gNMI device to lighty.io gNMI application is performed by postman request 'Add Keystore'.
curl --request POST 'http://127.0.0.1:8888/restconf/operations/gnmi-certificate-storage:add-keystore-certificate' \
--header 'Content-Type: application/json' \
--data-raw "{
\"input\": {
\"keystore-id\": \"keystore-id-1\",
\"ca-certificate\": \"$(cat certificates/ca.crt)\",
\"client-key\": \"$(cat certificates/client.key)\",
\"client-cert\": \"$(cat certificates/client.crt)\"
}
}"
Simulated gNMI device can be connected with 'Connect device' request located in postman collection.
curl --request PUT 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator' \
--header 'Content-Type: application/json' \
--data-raw '{
"node": [
{
"node-id": "gnmi-simulator",
"connection-parameters": {
"host": "127.0.0.1",
"port": 10161,
"keystore-id": "keystore-id-1",
"credentials": {
"username": "admin",
"password": "admin"
}
},
"extensions-parameters": {
"gnmi-parameters": {
"use-model-name-prefix": true
}
}
}
]
}'
The body of this request contains: the identifier for keystore, device information, extension parameters and basic authorization required by device. When device is successfully connected to application, logs similar to these should be visible on standard output:
INFO [gnmi_executor-1] (GnmiMountPointRegistrator.java:52) - Mount point for node gnmi-simulator created: {closed=false, instance=org.opendaylight.mdsal.dom.spi.SimpleDOMMountPoint@60112bc5}
INFO [gnmi_executor-0] (GnmiNodeListener.java:105) - Connection with node Uri{_value=gnmi-simulator} established successfully
Device state can be also checked by request 'Get gnmi-simulator node'. In the section gnmi-topology:node-state
of response, current state of device or information about occurred errors can be found. If the device is connected, then
the node-status property will contain the value READY, in the response.
Provided postman-collection contains few examples for getting data from gNMI device: 'Get interfaces','Get system'
and 'Get Authentication'.
The 'Get*' requests show how to obtain information from controller, e.g. to get authentication information:
curl --request GET 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator/yang-ext:mount/openconfig-system:system/aaa/authentication'
To write authentication information the PUT request 'Put Authentication config/state' from postman collection can be
used.
curl --request PUT 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator/yang-ext:mount/openconfig-system:system/aaa/authentication' \
--header 'Content-Type: application/json' \
--data-raw '{
"openconfig-system:authentication": {
"config": {
"authentication-method": [
"openconfig-aaa-types:TACACS_ALL"
]
},
"state": {
"authentication-method": [
"openconfig-aaa-types:RADIUS_ALL"
]
}
}
}'
This request replace data in authentication/config container, remove the admin-user container and add new container
state. All request setting the specific information on gNMI simulator are applying into CONFIGURATION datastore.
To view and check changed configuration, the 'Get Authentication from CONFIG' request is located in postman collection.
curl --request GET 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator/yang-ext:mount/openconfig-system:system/aaa/authentication?content=config'
To view actual running configuration of device, it is required to sent request with ?content=nonconfig parameter
at the end of the URL or execute request from postman collection 'Get Authentication from STATE'.
curl --request GET 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator/yang-ext:mount/openconfig-system:system/aaa/authentication?content=nonconfig'
To update data, the example request 'Update config data' can be used. This request append new type to config
authentication-method.
curl --request PATCH 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator/yang-ext:mount/openconfig-system:system/aaa/authentication/config' \
--header 'Content-Type: application/json' \
--data-raw '{
"openconfig-system:config": {
"authentication-method": [
"openconfig-aaa-types:RADIUS_ALL"
]
}
}'
To validate request send GET request 'Get Authentication from CONFIG'.
curl --request GET 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator/yang-ext:mount/openconfig-system:system/aaa/authentication?content=config'
For deleting config container send request 'Delete authentication config'.
curl --location --request DELETE 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator/yang-ext:mount/openconfig-system:system/aaa/authentication/config'
To validate request send GET request 'Get Authentication from CONFIG'.
curl --request GET 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator/yang-ext:mount/openconfig-system:system/aaa/authentication?content=config'
When is required restart of connection or removal of device, just send request 'Remove device'.
curl --request DELETE 'http://127.0.0.1:8888/restconf/data/network-topology:network-topology/topology=gnmi-topology/node=gnmi-simulator'
For restarting connection it is required to send request 'Connect device'