Pihole Display

Hardware

Raspberry Pi 3B+ with pihole
Waveshare 2.13 inch ePaper display model B (3 colors: black, white and red)

Installation

Waveshare display drivers

Install the libraries mentioned here.
Enable spi, i2c and edit the modules config file as given here
[Optional] Download demo code from here and run it to make sure everything is working

Font Installation

to install the font on your Pi, run
also install the requests library (needs pip to be installed)
```
sudo pip install requests
```

Final steps

If you downloaded the demo code, just place the stats.py inside the 2.13inch_e-Paper_HAT-code/raspberrypi/python folder
If you didnot download the demo code, copy the python folder from this repo into your pi folder.
run the stats.py script using
```
./start-pihole-stat.sh
```

Running on startup

Lastly we just want to make this run at boot. We'll do that the easy way by editing /etc/rc.local adding /home/pi/piholedisplay/start-pihole-stat.sh & before exit 0.
Then save and you can reboot to test it out

Use sudo cp pihole-stati.service /etc/systemd/system sudo systemctl daemon-reload sudo systemctl enable pihole-stats.service