Skip to content

Latest commit

 

History

History
94 lines (63 loc) · 4.01 KB

README.md

File metadata and controls

94 lines (63 loc) · 4.01 KB
Raw

Bear Frame Upgrade 2.1

LCD Cover

Table of contents

  1. Introduction
  2. Pictures
  3. Compatibility
  4. Bill of materials
  5. Printed parts
  6. Print settings

Introduction

This is an alternative LCD cover designed for the Bear Frame Upgrade.

  • New accurate design from scratch
  • Shorter frame thanks to a bevel at the front (4th picture)
  • Elimination of vibrations by using 4 screws to attach the LCD
  • Easier rotation of the LCD knob
  • Faster to print while using less filament
  • Sleek design for better look
  • Improved design for best print quality
  • Optional: LCD supports compatible with stock Prusa MK3(S) frame
  • Available in several looks:
    • Simple without text or logo
    • Bear logo
    • Bear Upgrade text
    • Bear logo and text
    • Bear Paw logo

💡 The Bear Paw logo is a special design for the LGBT community because it is one of their symbols. You can find more details about it here: https://en.wikipedia.org/wiki/Bear_flag_(gay_culture)

Pictures

LCD Cover Animation

LCD Cover Photo speaker holes

LCD Cover Photo top view

LCD Cover Photo bevel

LCD Cover Photo screw mount

Compatibility

This Bear LCD cover is compatible with all Bear Frame Upgrades. It is also compatible with the Original Prusa MK3(S) frame (see section Printed parts).

Bill of materials

Part Quantity Detail
Original Prusa LCD unit 1 Prusa store link
M3x10mm socket head screw ISO 4762 4

Printed parts

Part Qty Note Download link
lcd_cover 1 Choose one of the available designs (check the GIF on top) lcd_cover.stl
lcd_cover_text.stl
lcd_cover_logo.stl
lcd_cover_logo_text.stl
lcd_cover_lgbt_bear_paw.stl
lcd_knob 1 lcd_knob.stl
lcd_support_a 1 For Bear frame lcd_support_a.stl
lcd_support_b 1 For Bear frame lcd_support_b.stl
lcd_support_a_prusa 1 For Original Prusa frame lcd_support_a_prusa.stl
lcd_support_b_prusa 1 For Original Prusa frame lcd_support_b_prusa.stl

Print settings

⚠️ Warning: It is important to follow the recommended print settings and to calibrate your extrusion multiplier before printing the parts (for each and every spool that you use). Check our calibration guide here.

  • Slicer : PrusaSlicer recommended
  • Infill type : Gyroid recommended
  • Support : No
  • Brim : No
  • Detect thin walls : No
  • Perimeters width : 0.45mm
Part Layer
Height
[mm]		 Infill [%] Num.
Perimeters		 Num.
Top/Bottom
Layers
lcd_cover 0.20 20 3 5
lcd_support 0.20 20 3 5
lcd_knob 0.20 20 3 5

Credit

The bear paw logo has been designed by Solipandi Designs: https://www.etsy.com/listing/487103775/bear-paw-svg-cut-files-svg-and-dxf-cut